Vertens,
Do you agree to fund together for a giveaway topic to people ?
it depends on how much fund we can gather
Topic: Vertcoin - First Scrypt N | First Stealth Address - Privacy without mixer - page 449. (Read 1232701 times)
February 09, 2014, 04:17:43 PM
February 09, 2014, 04:15:22 PM
I'm pretty sure mining for Vertcoin just ruined my TRI-X 290X.
You just realized VTC is a GPU killer? February 09, 2014, 04:14:53 PM
I'm pretty sure mining for Vertcoin just ruined my TRI-X 290X.
February 09, 2014, 04:11:08 PM
i can only guess.
Are the cards overclocked? Do you use the auto-fan feature of the miner?
FyI: the codebase of vertminer is nearly the same as with cgminer-3.7.2 but the opencl kernel is tweaked -> the cards are pushed harder
My 7950s run since > 1 week without any problem (only yesterday i had to restart because here we had a 2 second power loss)
Hm, the settings look safe. My 7950s are at 1000/1500 with 1.012V (at 80°C with BIOS Fan control)
The only relation to the 0 RPM i can see is with the fixed Fan.
Did this happen also before with vertminer < 0.5.2? Or only now with vertminer-0.5.3?
February 09, 2014, 04:10:25 PM
My deposit made yesterday is still not on cryptsy, do you guys have some deposits processed or is cryptsy not working with vtc?
Same thing for me. Cryptsy support tell me VTC is on maintenance but I don't know when it will be available again. Very strange for me to enable deposit during maintenance. The only thing I have to do is patience and think I would know trade again with Cryptsy February 09, 2014, 04:08:18 PM
My deposit made yesterday is still not on cryptsy, do you guys have some deposits processed or is cryptsy not working with vtc?
I just sent mine in 2 hours ago. Also issued a support ticket an hour ago. I SERIOUSLY hope there will be no problems. On the blockchain it says transaction went through and is on the address cryptsy generated. Only frontend of cryptsy not showing it. Im just over-panicking.
February 09, 2014, 04:05:24 PM
My deposit made yesterday is still not on cryptsy, do you guys have some deposits processed or is cryptsy not working with vtc?
February 09, 2014, 04:04:54 PM
Pump pump pump from https://twitter.com/CryptoPumpArmy. Can't believe the energy from Vertcoin tonight!
gtfo with your stupid pumpshit
February 09, 2014, 04:01:48 PM
Pump pump pump from https://twitter.com/CryptoPumpArmy. Can't believe the energy from Vertcoin tonight!
February 09, 2014, 03:54:43 PM
Just opened new pool (vardiff, proportional, 0% fee)
Second block found - BOUNTY: for user who will find 10th block I will pay 10 VTCs
Only 3 blocks left for winning 10 VTCs - join and get the bounus!
February 09, 2014, 03:48:10 PM
ARE WE ON VIRCUREX NOW???
Looks like we are! Lets get tweeting -\this is a huge exchange. Remember if you are on Twitter use the #Vertcoin and #BetterThanBitcoin hashtags
February 09, 2014, 03:42:16 PM
February 09, 2014, 03:41:39 PM
ARE WE ON VIRCUREX NOW???
Yes 
February 09, 2014, 03:37:10 PM
ARE WE ON VIRCUREX NOW???
February 09, 2014, 03:21:23 PM
Hello, please add www.cryptosextoys.com to the spend section in the OP, thanks!
February 09, 2014, 03:13:00 PM
Could one of the developers please address this issue: https://bitcointalksearch.org/topic/m.4971799
There have been several people in that thread that responded they had the same issue. I am worried that this will kill my cards. I have had this problem after a day of mining VTC on two separate rigs (different cards too, 7950 and 280X).
Short recap of the issue:
After mining VTC for some time, some cards start showing 511 C and 0 RPM in Vertminer, are not hashing, and get very hot. Even after coldreboot, the problem does not go away, and also appears in normal cgminer (which previously never exhibited this issue). It seems it is necessary to turn off and wait some time before it starts working again. I've never had this problem with the normal cgminer. On some of my 7950s, after this issue occured, I never reached back the same hashrate as before (about 50KH/s lower in normal cgminer).
Vertminer 0.5.3.
I also noticed that when I use I13, TC8193 on my 280X (the I13 is crucial), I will get 1 or 2 HW errors when I start vertminer, but no (or not many) more after that. I am wondering if this could be related. However at I12 I cannot get more than around 270 KH/s, while I get 360 on I13.
There have been several people in that thread that responded they had the same issue. I am worried that this will kill my cards. I have had this problem after a day of mining VTC on two separate rigs (different cards too, 7950 and 280X).
Short recap of the issue:
After mining VTC for some time, some cards start showing 511 C and 0 RPM in Vertminer, are not hashing, and get very hot. Even after coldreboot, the problem does not go away, and also appears in normal cgminer (which previously never exhibited this issue). It seems it is necessary to turn off and wait some time before it starts working again. I've never had this problem with the normal cgminer. On some of my 7950s, after this issue occured, I never reached back the same hashrate as before (about 50KH/s lower in normal cgminer).
Vertminer 0.5.3.
I also noticed that when I use I13, TC8193 on my 280X (the I13 is crucial), I will get 1 or 2 HW errors when I start vertminer, but no (or not many) more after that. I am wondering if this could be related. However at I12 I cannot get more than around 270 KH/s, while I get 360 on I13.
i can only guess.
Are the cards overclocked? Do you use the auto-fan feature of the miner?
FyI: the codebase of vertminer is nearly the same as with cgminer-3.7.2 but the opencl kernel is tweaked -> the cards are pushed harder
My 7950s run since > 1 week without any problem (only yesterday i had to restart because here we had a 2 second power loss)
February 09, 2014, 02:58:45 PM
I hope no one minds my intrusion.
If anyone is looking for a pool I would like to invite them to https://vertcoinheavyindustries.com/
Now the geek in me would like to talk about the cool software and solid configuration. Except I must admit that I've helped other pool operating members of the community and told them about said awesome software. For example I know several other pools now use nginx.
I won't take much more of your time, but please do consider heavy industries. You should find it a safe & stable pool for your miners.
If anyone is looking for a pool I would like to invite them to https://vertcoinheavyindustries.com/
Now the geek in me would like to talk about the cool software and solid configuration. Except I must admit that I've helped other pool operating members of the community and told them about said awesome software. For example I know several other pools now use nginx.
I won't take much more of your time, but please do consider heavy industries. You should find it a safe & stable pool for your miners.
February 09, 2014, 02:51:55 PM
VTC.POOLZ.NET will be back online in 2 hours with AntiDDOS protection!
I also mine in your pool.
February 09, 2014, 02:41:12 PM
How long till craptsy deposits start showing ?
If i were u, id get a support ticket and also message them asking whats going on...i did this after waiting 4 hours and it was there almost instantly...
February 09, 2014, 02:37:21 PM
How long till craptsy deposits start showing ?
Jump to: