[VUC, CHC, SIGT] 🚀 mining-enthusiasts.net - 0.25% - NEW ALTCOINS! - page 5.

Krisso

member

Activity: 72

Merit: 10

Quote from: lyxtian on July 24, 2017, 01:08:39 PM

does anyone know how many chc can be mined per day with 1080ti?

Depends on the hash rate of the pool and the network, luck in finding blocks, number of miners on the pool and pool payout system - quite a lot of things as you can see. The Mining Enthusiast numbers are quite accurate - we get the current exchange rate and calculate hash rates quite precise. I do around 30 CHC a day with a rig of 6 x 1080TI at around 181 MH/s.

One 1080TI should therefore yield around 5 CHC/day.

Roger1955

newbie

Activity: 20

Merit: 0

Krisso, thanks for all your hard work!

@Nezero, check out www.chaincoin.org for all details on Chaincoin and the c11 hash, but basically it is 11 hashing algorithms chained.

Krisso

member

Activity: 72

Merit: 10

Quote from: Krisso on July 19, 2017, 06:16:51 AM

Quote from: ethereum716 on July 18, 2017, 11:52:30 AM

This site not have SSL? Isn't that insecure?

SSL will be added in the upcoming days.

The site is fully SSL enabled now https://mining-enthusiasts.net.

Our miners security and privacy is taken very seriously! Btw, Chaincoin is up again - dont lose hope - HODL! Come over and lets do some mining together!

nezero

full member

Activity: 276

Merit: 102

Quote from: Roger1955 on July 24, 2017, 01:36:16 AM

Hi Nezero, Good to hear from you. I suggest you check back through all this conversation and on the Mining-enthusiasts.net pool. Krisso has put together a really good set of instructions and tips. Follow what he says and suggests and it will work great. Some really important points to note. NVIDEA cards run best on C11 hash and using ccminer-Alexis78. Do not over clock the GPU by much and if you do go in very small steps.... allow the system to settle before making the next change, be patient. Wink

Good luck.

Thanks for your response. I have read the thread, but I've seen no mention of cgminer. The rig i have is ~380Mh/s ASIC, but it mines with cgminer and at this time I don't know if I can change that. If cgminer isn't supported by the pool I'll go a different route, but just thought I'd ask.

EDIT:

Have I misunderstood, I thought CHAINCOIN was x11 so assumed I could use my ASIC on it. What is C11?

Roger1955

newbie

Activity: 20

Merit: 0

Hi Nezero, Good to hear from you. I suggest you check back through all this conversation and on the Mining-enthusiasts.net pool. Krisso has put together a really good set of instructions and tips. Follow what he says and suggests and it will work great. Some really important points to note. NVIDEA cards run best on C11 hash and using ccminer-Alexis78. Do not over clock the GPU by much and if you do go in very small steps.... allow the system to settle before making the next change, be patient. Wink

Good luck.

nezero

full member

Activity: 276

Merit: 102

Hi all,

Just set up my iBeLink DM384M to do work, but it got 100% rejections.

Can I mine using cgminer?

FYI I'm a noob at mining!

setup

stratum+tcp://mining-enthusiasts.net:3032 nezero.1 1234

Roger1955

newbie

Activity: 20

Merit: 0

Hi Krisso, Great job by you and your small team!!! Been mining with you a couple of days now. Your pool runs better than any other I have tried! Keep up the great work!!!

ethereum716

newbie

Activity: 17

Merit: 0

Excellent! Great work by your team here Krisso.

Krisso

member

Activity: 72

Merit: 10

Quote from: ethereum716 on July 18, 2017, 11:52:30 AM

This site not have SSL? Isn't that insecure?

SSL will be added in the upcoming days.

ethereum716

newbie

Activity: 17

Merit: 0

This site not have SSL? Isn't that insecure?

techansaari

newbie

Activity: 12

Merit: 0

Thanks for the response,
Clocking is :
Power Limit 62%
Temp Limit 70%
Core Clock +50
Mem Clock +500
Fan 55%

Using Msi Afterburner.

Nvidia drivers are updated to 384.76, Windows 8 64 bit
ccminer is latest.

Krisso

member

Activity: 72

Merit: 10

Quote from: techansaari on July 18, 2017, 04:38:53 AM

Hello Krisso,

I am trying to mine with your pool having 4 gtx 1060 3gb (1 of my rig) but getting "Results #xxxxxxx could not verified on CPU constantly.
Is there any thing missing?
Thanks

Just read through the thread, its either to much overclocking, old nvidia drivers, worng ccminer version or to high of an intensity setting on your command line. Cheers!

techansaari

newbie

Activity: 12

Merit: 0

Hello Krisso,

I am trying to mine with your pool having 4 gtx 1060 3gb (1 of my rig) but getting "Results #xxxxxxx could not verified on CPU constantly.
Is there any thing missing?
Thanks

psystar

newbie

Activity: 10

Merit: 0

All those who have been having problems with Chaincoin Wallet Sync >>

Chaincoin Wallet Out Sync - No Blocks Found - No Network Connection

You need to addnode to your conf file...

You can find this file here C:\Users\Nick\AppData\Roaming\Chaincoin

Nick is my username find yours...

Add the additional nodes in your config.

addnode=149.56.108.123:11994
addnode=208.94.242.218:11994
addnode=104.238.153.140:11994
addnode=45.76.17.223:11994
addnode=45.32.1.206:11994
addnode=176.9.35.109:12040
addnode=144.76.64.49:11994
addnode=45.32.185.155:11994
addnode=51.15.132.222:12003
addnode=75.130.162.248:11990
addnode=75.130.162.248:11993
addnode=69.12.74.106:11994
addnode=54.244.65.248:11994
addnode=104.238.167.251:11994
addnode=45.76.235.204:11994
addnode=75.130.162.248:11995
addnode=104.223.2.247:11994
addnode=75.130.162.248:11998
addnode=45.76.90.207:11994
addnode=75.130.162.248:11999

Hope this helps .. Cheers

psystar

newbie

Activity: 10

Merit: 0

Quote from: Krisso on July 17, 2017, 02:05:37 PM

Quote from: psystar on July 17, 2017, 01:00:43 AM

I am trying to mine with my 1 X 1050ti Asus OC Game Strixx with stock settings ..
but miner crashes in 10 secs ..

It works fine with Yimp pool >> with settings below

ccminer-x64.exe -a c11 -o stratum+tcp://yiimp.ccminer.org:3573 -u CTfpsFvzcmKsHLDWTGwyxvx8f5QehJAZt4 -p c=CHC

But when m using mining-enthusiasts.net:3032 it is crashing ..

ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u "myusername" -p "mypassword"

I noticed when mining on YIMP gpu intensity is set to 19 ... but on mining-enthusiasts.net it is 9 .. could this be the cause ?

How to fix this guys .. any help?

Once again its all stock settings .. no overclock. no change in any settings of GPU what so ever !

Please give it another go, we have tweaked some server settings, you can adjust the intensity by using the -i command line option, e.g.:

Code:

ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u Steve.StevesWorker -p StevesWorkerPassword -i 20

Hope that helps!

Thanks it did work !!

rukeysersoze

newbie

Activity: 3

Merit: 0

Quote from: Krisso on July 17, 2017, 04:38:55 PM

Quote from: rukeysersoze on July 17, 2017, 04:27:09 PM

so somehow I locked myself out of my account mining-enthusiasts account Undecided

... the email password reset/unlock does not seem to want to send me an email Sad

The mail system is relaying over gmail and hit its capacity limits for today. Wait until midnight UTC, quota will reset and mails will be going through again. We are working on a fix.

Thanks Krisso !

Krisso

member

Activity: 72

Merit: 10

Quote from: rukeysersoze on July 17, 2017, 04:27:09 PM

so somehow I locked myself out of my account mining-enthusiasts account Undecided

... the email password reset/unlock does not seem to want to send me an email Sad

The mail system is relaying over gmail and hit its capacity limits for today. Wait until midnight UTC, quota will reset and mails will be going through again. We are working on a fix.

rukeysersoze

newbie

Activity: 3

Merit: 0

so somehow I locked myself out of my account mining-enthusiasts account Undecided

... the email password reset/unlock does not seem to want to send me an email Sad

Krisso

member

Activity: 72

Merit: 10

Quote from: elitistdouche on July 17, 2017, 02:32:31 PM

The issue should be solved, please re-evaluate and report back - thanks for helping!

So far so good on that front Grin

The hashrate slowly declines now. Is this normal?

It will always vary a bit, you shouldn't have stalling anymore nor ultra low rates. VarDiff will still try to find optimal difficulty - so it will come to a good match after some time mining. Just observe and report back Cheesy

Topic: [VUC, CHC, SIGT] 🚀 mining-enthusiasts.net - 0.25% - NEW ALTCOINS! - page 5. (Read 11346 times)