Topic: [VUC, CHC, SIGT] 🚀 mining-enthusiasts.net - 0.25% - NEW ALTCOINS! - page 6. (Read 11346 times)

Quote from: Krisso on July 16, 2017, 12:15:48 PM

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Same here, it's so bad to believe in a coin and the wallet does not work, there is no information on the official website

Hi

make sure you have ports open 11994, 11995
Also make sure you enable UPnP on your router. This worked for me and the wallet started syncing

@Krisso

I avg about 150-160MH/s yet your site reports only 130. What could be the cause of this?
Where is the server located, in EU?

Thanks

The site uses a stratum server with vardiff - it's setup aggressively giving you around 20 seconds to find a share on a 20% variance, then retargets difficulty every 40 seconds if your rig fails to hit the threshold. This can sometimes result in lower reported hash rates as you get hit with difficult shares - or said differently - your rig is calculating and not sending shares. The upside is that if you fall down you will get lower difficulties and a higher resulting hash rate after, so it should average out. If you look at your income / earnings you'll see that this should be as effective as possible.

Thanks for the explanation. But why does the diff increase in such extreme steps. It seems a lot worse today. It does this a lot and then it just sits there for minutes not really submitting anything.

Thanks for reporting, we have adjusted our stratum servers today due to more miners and a higher hash rate throughput. Your issues should be fixed and addressed

R0vsvamp

newbie

Activity: 2

Merit: 0

So is this pool better then yiimp.ccminer.org ?

jp1981

newbie

Activity: 34

Merit: 0

Quote from: jp1981 on July 16, 2017, 11:48:58 AM

Quote from: ElijahSanju on July 16, 2017, 09:02:21 PM

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Same here, it's so bad to believe in a coin and the wallet does not work, there is no information on the official website

Hi

make sure you have ports open 11994, 11995
Also make sure you enable UPnP on your router. This worked for me and the wallet started syncing

@Krisso

I avg about 150-160MH/s yet your site reports only 130. What could be the cause of this?
Where is the server located, in EU?

Thanks

The site uses a stratum server with vardiff - it's setup aggressively giving you around 20 seconds to find a share on a 20% variance, then retargets difficulty every 40 seconds if your rig fails to hit the threshold. This can sometimes result in lower reported hash rates as you get hit with difficult shares - or said differently - your rig is calculating and not sending shares. The upside is that if you fall down you will get lower difficulties and a higher resulting hash rate after, so it should average out. If you look at your income / earnings you'll see that this should be as effective as possible.

Thanks for the explanation. But why does the diff increase in such extreme steps. It seems a lot worse today. It does this a lot and then it just sits there for minutes not really submitting anything.

http://imgur.com/ew0lqXv

psystar

newbie

Activity: 10

Merit: 0

I am trying to mine with my 1 X 1050ti Asus OC Game Strixx with stock settings ..
but miner crashes in 10 secs ..

It works fine with Yimp pool >> with settings below

ccminer-x64.exe -a c11 -o stratum+tcp://yiimp.ccminer.org:3573 -u CTfpsFvzcmKsHLDWTGwyxvx8f5QehJAZt4 -p c=CHC

But when m using mining-enthusiasts.net:3032 it is crashing ..

ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u "myusername" -p "mypassword"

I noticed when mining on YIMP gpu intensity is set to 19 ... but on mining-enthusiasts.net it is 9 .. could this be the cause ?

How to fix this guys .. any help?

Once again its all stock settings .. no overclock. no change in any settings of GPU what so ever !

Elder III

sr. member

Activity: 1246

Merit: 274

To everyone seeking information on mining with AMD GPUs.... You will need to use Sgminer since ccminer (all versions of it) is for NViDIa GPUs only. The Sgminer version that supports CHC is an experimental modification of the original Sgminer and in my personal testing was not 100% stable (even at stock settings). With an Rx 480 8GB at stock settings you could expect about 6.5 Mh/s, a Rx 470 would be lower then that of course. ---- to sum it up briefly --- AMD is not currently a worthwhile option to mine Chaincoin. Sorry folks, but you'll do better on a different coin at this point.

Thanks Team, Glad to see chain-coin community is going strong. I would switch my rig to it... however, please confirm which miner you recommend for AMD cards... as my RX580 8 gigs are able to mine only 5-6 m/h/ sec per card by using SG miner.

Please HELP.......

Quote from: Krisso on July 13, 2017, 01:15:28 PM

Hello everyone,

we are a team of two experienced dev-op engineers that want to bring a secure, scalable and stable Chaincoin mining pool to the community.

Our believe is that Chaincoin (CHC) has a tremendous potential in the future and we want to offer a place to mine coins with excellent support from our side and a place where almost all profit goes to the miner - the person who spends all the energy, electricity and hardware cost in the first place!

Chaincoin Enthusiasts is just taking a 0.25% fee to cover server expenses and everything else goes to the miners!
Of course you can always choose to donate some of your hard earned coins to support our cause! 😇

We have a great scalable system at hand and are ready to discuss improvements based on demand from our miners:

More pools in different regions besides Europe
Different payout schemes: PPS/PPLNS (we currently run the simple proportional payout system)
Support for other altcoins

Visit us at http://mining-enthusiasts.net, sign up and start mining as easy as hitting our VarDiff stratum server:

Code:

ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u User.Workername -p WorkerPassword

Thanks for joining us and have fun mining!

Quote from: kansloze on July 16, 2017, 06:16:30 PM

Hi guys,

A couple of noob questions:
I got the Alexis miner but it is just a .exe file? Nothing more?
And I got a batch file but it doesn't seems to work. I got 6 RX470 cards.
This is my batch file now, so maybe someone see what is wrong with it?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u LeonDroogendijk.miner1 -p xxxxxxxx

Quote from: va23boam on July 16, 2017, 11:25:24 AM

What sort of hash rate should be expected from 6x rx470 4gb cards? And with what miner?

And to overcook should only the core clock be increased? What about memory?

Thanks

ElijahSanju

newbie

Activity: 8

Merit: 0

Thanks Team, Glad to see chain-coin community is going strong. I would switch my rig to it... however, please confirm which miner you recommend for AMD cards... as my RX580 8 gigs are able to mine only 5-6 m/h/ sec per card by using SG miner.

Please HELP.......

Quote from: Krisso on July 13, 2017, 01:15:28 PM

Hello everyone,

we are a team of two experienced dev-op engineers that want to bring a secure, scalable and stable Chaincoin mining pool to the community.

Our believe is that Chaincoin (CHC) has a tremendous potential in the future and we want to offer a place to mine coins with excellent support from our side and a place where almost all profit goes to the miner - the person who spends all the energy, electricity and hardware cost in the first place!

Chaincoin Enthusiasts is just taking a 0.25% fee to cover server expenses and everything else goes to the miners!
Of course you can always choose to donate some of your hard earned coins to support our cause! 😇

We have a great scalable system at hand and are ready to discuss improvements based on demand from our miners:

More pools in different regions besides Europe
Different payout schemes: PPS/PPLNS (we currently run the simple proportional payout system)
Support for other altcoins

Visit us at http://mining-enthusiasts.net, sign up and start mining as easy as hitting our VarDiff stratum server:

Code:

ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u User.Workername -p WorkerPassword

Thanks for joining us and have fun mining!

kansloze

newbie

Activity: 17

Merit: 0

Hi guys,

A couple of noob questions:
I got the Alexis miner but it is just a .exe file? Nothing more?
And I got a batch file but it doesn't seems to work. I got 6 RX470 cards.
This is my batch file now, so maybe someone see what is wrong with it?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ccminer -q -a c11 -o stratum+tcp://mining-enthusiasts.net:3032 -u LeonDroogendijk.miner1 -p xxxxxxxx

Fiisk

newbie

Activity: 6

Merit: 0

Quote from: jp1981 on July 16, 2017, 11:48:58 AM

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Same here, it's so bad to believe in a coin and the wallet does not work, there is no information on the official website

Got mine working! In the "chaincoin.conf" config file in your chaincoin install location add this:

addnode=45.63.90.82:70002

That initially gave me 1 connection and now after 5 min i'm up to 8 connections

My wallet address: CKSD8cxqnPidPjjqj7vWAzA9pZK4DiA32H

Krisso

member

Activity: 72

Merit: 10

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Same here, it's so bad to believe in a coin and the wallet does not work, there is no information on the official website

Hi

make sure you have ports open 11994, 11995
Also make sure you enable UPnP on your router. This worked for me and the wallet started syncing

@Krisso

I avg about 150-160MH/s yet your site reports only 130. What could be the cause of this?
Where is the server located, in EU?

Thanks

The site uses a stratum server with vardiff - it's setup aggressively giving you around 20 seconds to find a share on a 20% variance, then retargets difficulty every 40 seconds if your rig fails to hit the threshold. This can sometimes result in lower reported hash rates as you get hit with difficult shares - or said differently - your rig is calculating and not sending shares. The upside is that if you fall down you will get lower difficulties and a higher resulting hash rate after, so it should average out. If you look at your income / earnings you'll see that this should be as effective as possible.

jp1981

newbie

Activity: 34

Merit: 0

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Same here, it's so bad to believe in a coin and the wallet does not work, there is no information on the official website

Hi

make sure you have ports open 11994, 11995
Also make sure you enable UPnP on your router. This worked for me and the wallet started syncing

@Krisso

I avg about 150-160MH/s yet your site reports only 130. What could be the cause of this?
Where is the server located, in EU?

Thanks

va23boam

member

Activity: 88

Merit: 10

What sort of hash rate should be expected from 6x rx470 4gb cards? And with what miner?

And to overcook should only the core clock be increased? What about memory?

Thanks

Krisso

member

Activity: 72

Merit: 10

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Same here, it's so bad to believe in a coin and the wallet does not work, there is no information on the official website

Hard to debug this from far away, but you should make sure you have an inbound Firewall rule added to your windows firewall rules. The chaincoin wallet asks you to add it on the first run, maybe you disallowed it or it didn't pop up and the wallet cant connect. make sure its in there.

rdluffy

legendary

Activity: 2366

Merit: 1408

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Same here, it's so bad to believe in a coin and the wallet does not work, there is no information on the official website

psystar

newbie

Activity: 10

Merit: 0

Quote from: Krisso on July 16, 2017, 06:16:52 AM

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Hey guys i am having same issues.. Wallet is out of sync.. No blocks found and its not connected to any network ...

Fiisk

newbie

Activity: 6

Merit: 0

I have some problem with the chaincoin wallet - maybe someone can help me?
i have version 0.9.2.4 beta - And i can't get it to sync! i can't find any connections. What can i do ?

Which OS are you on?

Windows 10 64 bit

Krisso

member

Activity: 72

Merit: 10