Topic: Whatsminer M20 is announced and available for pre-order - page 3. (Read 4298 times)
Seems another demo unit rated at 66Ths had a psu fail at stock. Seems MircoBT is working to update the issues with the psu's.
yours is better than mine
68 th with 3360 watts = 49.4 watts
65 th with 3180 watts = 48.9 watts
3180/208 = 15.288 amps safe
3360/208 = 16.153 amps not safe
I use this wire
https://www.ebay.com/itm/L6-30P-to-C19-Molded-Power-Cord-10ft-220V-250V-30A-Ships-Free/202648792458?
it rates to 16 amps continuous duty.
my Clifton NY mine drops to 217 volts
so
3180/217 = 14.654 amps which is well under 16 amp derated
3360/217 = 15.483 amps which is very close to 16 amp derated number
If I had the 30 units I need to max out I would want yours not mine.
68 th with 3360 watts = 49.4 watts
65 th with 3180 watts = 48.9 watts
3180/208 = 15.288 amps safe
3360/208 = 16.153 amps not safe
I use this wire
https://www.ebay.com/itm/L6-30P-to-C19-Molded-Power-Cord-10ft-220V-250V-30A-Ships-Free/202648792458?
it rates to 16 amps continuous duty.
my Clifton NY mine drops to 217 volts
so
3180/217 = 14.654 amps which is well under 16 amp derated
3360/217 = 15.483 amps which is very close to 16 amp derated number
If I had the 30 units I need to max out I would want yours not mine.
I'll check that LP mode tonight and see if it takes. I'll let you know how the power draw is as well, just have to convert the plug ends over. So far I've only hooked it up and let it run to confirm the hashrate, had to go out of town so no time to test anything yet.
Quick update: I have no working LP mode. Same as you noted you can select it but it doesn't work.
Power meter is hooked up this morning so far looks like 65 TH at 3180W. I'm going to give it a 24 hour run and I'll do a review write-up like I originally planned - considering it is a different spec machine.
Quick update: I have no working LP mode. Same as you noted you can select it but it doesn't work.
Code:
Power detect error, can not find power P20 in config
Power meter is hooked up this morning so far looks like 65 TH at 3180W. I'm going to give it a 24 hour run and I'll do a review write-up like I originally planned - considering it is a different spec machine.
Do you have a low power option that works?
Does the 65th use 3100 watts vs 3350 watts?
I for one would prefer a unit using 3100 watts with a bit less hash.
3100/208 = 14.9 amps
3350/208 = 16.1 amps
All the cables I have found rate 20/16 amps
Now our power does not drop to 208 it drops to 216
But
3100/ 216= 14.35 amps
3350/ 216 = 15.50 amps. So my unit is here at the moment close to the 16 amp max for 24/7/365 duty.
My second unit was lost at JFK airport I have a postal trace on it but I have very little hope of recovery.
This will represent the most expensive piece of gear ever lost during shipping for me.
Sucks big time. But shit happens.
Does the 65th use 3100 watts vs 3350 watts?
I for one would prefer a unit using 3100 watts with a bit less hash.
3100/208 = 14.9 amps
3350/208 = 16.1 amps
All the cables I have found rate 20/16 amps
Now our power does not drop to 208 it drops to 216
But
3100/ 216= 14.35 amps
3350/ 216 = 15.50 amps. So my unit is here at the moment close to the 16 amp max for 24/7/365 duty.
My second unit was lost at JFK airport I have a postal trace on it but I have very little hope of recovery.
This will represent the most expensive piece of gear ever lost during shipping for me.
Sucks big time. But shit happens.
Well I finally received some tracking info and see it as confirmed shipped. Just over a month late but should have it in hand Tuesday, and online that night if I'm lucky. Almost would prefer Wednesday so I'm home but I've found making any changes to my DHL deliveries is to confusing for the local people; at least it's not -30C outside this time around. 
So I finally got my machine in been busy and couldn't do much more than get it hooked up and hashing yesterday. So far so good, I should have my power meter on it this weekend to get some results but the sound was easily dealt with, i'll take readings of that as well.
Things that aren't so good and need to be discussed with Pangolin, it appears they sent me a 65 TH model - little over 10% below advertised spec when i ordered (72) and 3 TH lower than the model I should have received.
Can't really call it a PM here so I DM'd ya. 
Can't say duties help this but will may help 100 or more get some better pricing and worry free customs support on our tax id.
Can't say duties help this but will may help 100 or more get some better pricing and worry free customs support on our tax id.
Looks like 100 unit pricing from pango is displayed. We added a group for july batch with customs support for buyers.
can't find it can you pm link please
Looks like 100 unit pricing from pango is displayed. We added a group for july batch with customs support for buyers.
My opinion for what it is worth is that it pushes the psu too hard and should be tweaked 5% lower to 65th vs the 68.6 th I am getting> I think the psu would work better doing 3200 or 3100 watts vs the 3375 I am doing on mine.
I realize that ac 3375 x .94 = 3173 dc so it is not maxed .
Oh it is running here you can log in and see it's hash
m20s
http://ckpool.org/users/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr
I am running the gear in cool spots right now I moved it out of garage which was 80f to the small solar array in howell
that is about 60f so it does not struggle much as temps are easy on it.
I would think that in a 95f room it will struggle and pull more watts.
I realize that ac 3375 x .94 = 3173 dc so it is not maxed .
Oh it is running here you can log in and see it's hash
m20s
http://ckpool.org/users/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr
I am running the gear in cool spots right now I moved it out of garage which was 80f to the small solar array in howell
that is about 60f so it does not struggle much as temps are easy on it.
I would think that in a 95f room it will struggle and pull more watts.
3350 W is the max. power capacity at the low DC voltage rail.
It is a server grade psu so it can handle the nominal max. power 24/7/365.
I would not necessarily recommend overclocking this.
It is already pretty damn well optimized for max. performance.
It is a server grade psu so it can handle the nominal max. power 24/7/365.
I would not necessarily recommend overclocking this.
It is already pretty damn well optimized for max. performance.
Do you know what's the maximum power that can be drawn from the included PSU? (I was that this is rated for 3350W, looking for the real number)
Is there any room for overclocking? Given the extremely high efficiency it could be worth it
Is there any room for overclocking? Given the extremely high efficiency it could be worth it
Doesnt work
It is a loud beast indeed! (the M20S 68Ths)
I've mined with all kinds of devices but this one was the first one
which made me startle a little during the startup.
Here is a video:
https://mega.nz/#!UgcBhAoY!tXsJnCTid1zHgLzsrEzIoKBQR1u3gPuBGElo-gwaZ8Q
The numbers are looking great,
about 68Ths, 3.4kW
A further review will soon follow..
I've mined with all kinds of devices but this one was the first one
which made me startle a little during the startup.
Here is a video:
https://mega.nz/#!UgcBhAoY!tXsJnCTid1zHgLzsrEzIoKBQR1u3gPuBGElo-gwaZ8Q
The numbers are looking great,
about 68Ths, 3.4kW
A further review will soon follow..
Nice.
Does your low power option work or do you get error 201?
It is a loud beast indeed! (the M20S 68Ths)
I've mined with all kinds of devices but this one was the first one
which made me startle a little during the startup.
Here is a video:
https://mega.nz/#!UgcBhAoY!tXsJnCTid1zHgLzsrEzIoKBQR1u3gPuBGElo-gwaZ8Q
The numbers are looking great,
about 68Ths, 3.4kW
A further review will soon follow..
I've mined with all kinds of devices but this one was the first one
which made me startle a little during the startup.
Here is a video:
https://mega.nz/#!UgcBhAoY!tXsJnCTid1zHgLzsrEzIoKBQR1u3gPuBGElo-gwaZ8Q
The numbers are looking great,
about 68Ths, 3.4kW
A further review will soon follow..
Yeah I can only run it until about 11pm as I don't want my neighbors to kill me.
I can run the s-9 24/7/365 and it is not as noisy.
We are waiting for some power work in Clifton I will bring it up to the bigger farm on monday .
I can run the s-9 24/7/365 and it is not as noisy.
We are waiting for some power work in Clifton I will bring it up to the bigger farm on monday .
the 21s is like the bitmain t17 cheaper to buy but not as good as the s17
the m20s is like the bitmain s17 more costly to buy but better then the t15
Having run the m20s using close to 3360watts and getting 68.6 th
it is a beast it reminds me of this scene in the movie " fast and furious "
https://www.youtube.com/watch?v=WtnTZSJndPc
the m20s is like the bitmain s17 more costly to buy but better then the t15
Having run the m20s using close to 3360watts and getting 68.6 th
it is a beast it reminds me of this scene in the movie " fast and furious "
https://www.youtube.com/watch?v=WtnTZSJndPc
Well thats disappointing, i expected to see your video of the M20S not a clip from fast and furious...
But you could do a chrome paint job to the case if that makes you feel better.
the 21s is like the bitmain t17 cheaper to buy but not as good as the s17
the m20s is like the bitmain s17 more costly to buy but better then the t15
Having run the m20s using close to 3360watts and getting 68.6 th
it is a beast it reminds me of this scene in the movie " fast and furious "
https://www.youtube.com/watch?v=WtnTZSJndPc
it is an industrial machine as it sounds worse then any s-9
the m20s is like the bitmain s17 more costly to buy but better then the t15
Having run the m20s using close to 3360watts and getting 68.6 th
it is a beast it reminds me of this scene in the movie " fast and furious "
https://www.youtube.com/watch?v=WtnTZSJndPc
it is an industrial machine as it sounds worse then any s-9
still don't know why they have 2 models with almost the same W but diff THs.
Whatsminer M21S
56Th/s @ 3360W
Whatsminer M20S
68Th/s @ 3260W
Whatsminer M21S
56Th/s @ 3360W
Whatsminer M20S
68Th/s @ 3260W
yeah I could tell by the error I got that the code for it{low power mode) was left out or botched.
OK, perfect, thank you. I noticed on Microbt's site they list all the LPM firmware as "coming soon"
Jump to: