Pages:
Author

Topic: Who ordered the AMD Radeon VII? Lets make a list of Miners / Hashrates / Coins - page 17. (Read 12978 times)

full member
Activity: 1120
Merit: 131
@Kiba, could you give TeamRed's Cryptonight miner a go? In my opinion, Kerney and Todxx have the cleanest V8 kernel out there, and it actually scales well with increased core compute; leading me to believe that CNV8 isn't always memory bound, at least on the vega architecture anyways.

Unfortunately that miner software does not work with the Radeon 7 at this moment.

Can you try JCE CN miner ?
Support CN turtle (ultra lite), CN Stellite V5, bittube, heavy, haven...
newbie
Activity: 22
Merit: 1
@Kiba, could you give TeamRed's Cryptonight miner a go? In my opinion, Kerney and Todxx have the cleanest V8 kernel out there, and it actually scales well with increased core compute; leading me to believe that CNV8 isn't always memory bound, at least on the vega architecture anyways.

Unfortunately that miner software does not work with the Radeon 7 at this moment.
jr. member
Activity: 148
Merit: 5
Cryptonight v8 (Monero) XMR Stak 2800H/s with a power usage of 160W.

https://ibb.co/QQz6KMw

@Kiba, could you give TeamRed's Cryptonight miner a go? In my opinion, Kerney and Todxx have the cleanest V8 kernel out there, and it actually scales well with increased core compute; leading me to believe that CNV8 isn't always memory bound, at least on the vega architecture anyways.
newbie
Activity: 22
Merit: 1
Mining Beam with lolMiner 0.7 alpha 5b : 24sol/s with 140W power usage.

https://ibb.co/X3Tbbpz

The current driver sucks at overclocking. Settings don't stick or do not apply even if Wattman indicates so. Memory overclocking does not seem to work at all.



Cryptonight v8 (Monero) XMR Stak 2800H/s with a power usage of 160W.

https://ibb.co/QQz6KMw
legendary
Activity: 1510
Merit: 1003
It seems you could with vega 14nm undervolt a lot without losing hashrate, it looks you cant on vega 7nm as much as you could with vega 14nm.
with such wide bus and fast memory all algos start bottleneck to compute power. So, you'll need to keep gpu freq high => high voltage => high power consumption
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
It seems you could with vega 14nm undervolt a lot without losing hashrate, it looks you cant on vega 7nm as much as you could with vega 14nm.
sr. member
Activity: 1414
Merit: 487
YouTube.com/VoskCoin
100MH/s ETH is possible with a bit of overclocking but the power usage is over 300W.

https://ibb.co/wdzdgR7

embedded on forum for you

newbie
Activity: 22
Merit: 1
100MH/s ETH is possible with a bit of overclocking but the power usage is over 300W.

https://ibb.co/wdzdgR7
sr. member
Activity: 1414
Merit: 487
YouTube.com/VoskCoin
Anyone have this card yet? And can do a little benchmark for some popular algorithms?
I do have some but its not easy to run there most of it cos miners are not able to run on this card...
Eth is good and working, but for example C29 = poor 4,3gps, C31 is not working for me...
https://ctrlv.cz/uUxS


Can you please try with JCE CN miner ?

~2700 H/s using xmrig-amd, ~2800 on xmr-stak according this reddit post: https://www.reddit.com/r/MoneroMining/comments/ap3b92/preliminary_test_results_for_radeon_vii_xmr/

That's 20% more than a Vega 64, without optimal drivers and without miners code tuned for Radeon VII.

This GPU may render dual mining interesting again. Mine one core intensive algo, another memory intensive algo.

that'd be really interesting, was depressing to watch dual mining die to ASICs
full member
Activity: 1120
Merit: 131
Anyone have this card yet? And can do a little benchmark for some popular algorithms?
I do have some but its not easy to run there most of it cos miners are not able to run on this card...
Eth is good and working, but for example C29 = poor 4,3gps, C31 is not working for me...
https://ctrlv.cz/uUxS


Can you please try with JCE CN miner ?

~2700 H/s using xmrig-amd, ~2800 on xmr-stak according this reddit post: https://www.reddit.com/r/MoneroMining/comments/ap3b92/preliminary_test_results_for_radeon_vii_xmr/

That's 20% more than a Vega 64, without optimal drivers and without miners code tuned for Radeon VII.

This GPU may render dual mining interesting again. Mine one core intensive algo, another memory intensive algo.
newbie
Activity: 5
Merit: 0

Not today, very busy now.

Is miner hashrate on ethash is equal to pool hashrate?
Thanks.
sr. member
Activity: 633
Merit: 267
Anyone have this card yet? And can do a little benchmark for some popular algorithms?
I do have some but its not easy to run there most of it cos miners are not able to run on this card...
Eth is good and working, but for example C29 = poor 4,3gps, C31 is not working for me...
https://ctrlv.cz/uUxS


Can you please try with JCE CN miner ?

~2700 H/s using xmrig-amd, ~2800 on xmr-stak according this reddit post: https://www.reddit.com/r/MoneroMining/comments/ap3b92/preliminary_test_results_for_radeon_vii_xmr/
hero member
Activity: 600
Merit: 501
Anyone have this card yet? And can do a little benchmark for some popular algorithms?
I do have some but its not easy to run there most of it cos miners are not able to run on this card...
Eth is good and working, but for example C29 = poor 4,3gps, C31 is not working for me...
https://ctrlv.cz/uUxS


Can you please try with JCE CN miner ?
Not today, very busy now.
sr. member
Activity: 1414
Merit: 487
YouTube.com/VoskCoin
My results so far.
Unable to run in hiveos, have to use win, no overclocking possible yet...
Eth 90mhs
Grin c29 4,5gps, unable to run c31
Progpow 30mhs
Xmr 1880h/s
I had just 2 hours for tests, will see more results later.

awesome thank you for sharing, would you mind grabbing screenshots w/ the miner running? I'll load them onto the first post.

Also would like to know which miners used?



so, running 2 units, getting 87 mh/s for each. So far i din't find any real tweaking options. Also, i wasn't able to install driver support for both Radeon VII and Vega on the same sytem

Very same for my 2units.
Almost 300w/gpu.
Some say it should make 100-125mhs/200w with proper undervolting, but anything I've tried to use didn't work.
Tried wattman, afterburner etc...

so your VII are pulling ~300 watts on ethash? What about the other algos?
full member
Activity: 1120
Merit: 131
Anyone have this card yet? And can do a little benchmark for some popular algorithms?
I do have some but its not easy to run there most of it cos miners are not able to run on this card...
Eth is good and working, but for example C29 = poor 4,3gps, C31 is not working for me...
https://ctrlv.cz/uUxS


Can you please try with JCE CN miner ?
hero member
Activity: 600
Merit: 501
Anyone have this card yet? And can do a little benchmark for some popular algorithms?
I do have some but its not easy to run there most of it cos miners are not able to run on this card...
Eth is good and working, but for example C29 = poor 4,3gps, C31 is not working for me...
https://ctrlv.cz/uUxS
jr. member
Activity: 98
Merit: 6
Anyone have this card yet? And can do a little benchmark for some popular algorithms?
hero member
Activity: 1274
Merit: 556
if eth moves to progpow then most likely amd cards are dead on it cause nvidia cards have a huge advantage on it. The good thing is ethash asics will be dead. Funny though, most people using miners in the north hemisphere is to heat their houses hehe, I believe eth price will increase many times this year but if not then many using miners to heat the house will turn off as soon as teh winter ends and dif will crash.
Lol, progpow use highbandwith memory like vega & vii,
The performance of video cards from AMD on the ProgPow algorithm.
AMD Radeon RX 550 = 1.5 MHS/sec.
AMD Radeon RX 560 = 3 MHS/sec.
AMD Radeon RX 580 = 8.2 MHS/sec.
AMD Radeon VEGA 56 = 20.5 MHS/sec.
AMD Radeon VEGA 64 = 23 MHS/sec.
The performance of video cards from NVIDIA on the ProgPow algorithm.
NVIDIA Geforce GTX 1060 3gb = 8 MHS/sec.
NVIDIA Geforce GTX 1070 = 10.9 MHS/sec.
NVIDIA Geforce GTX 1070 Ti = 11.7 MHS/sec.
NVIDIA Geforce GTX 1080 = 16 MHS/sec.
NVIDIA Geforce GTX 1080 Ti = 21.5 MHS/sec.
NVIDIA Geforce RTX 2080 = 22.5 MHS/sec.
NVIDIA Geforce RTX 2080 Ti = 34 MHS/sec

Your results are different than what I saw here, https://whattomine.com/coins

For example, vega 56 does 15 mh/s, in your case 20.5, i wonder where those 25% come in.

Vega 64 17mh/s, in your case 23 mh/s, so different than what I saw on whattomine.
You're partially right.
AMD cards can achieve the higher hashrates as fmz89 claimed... but at a power draw that's out of this world. Mining ProgPow with a rig of Vegas not only heats up your house, but also your neighbour's in the process.
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
I can say for sure , you can do very easy 31.5MH/s avg on ethereum with rx 580 cards, if and only you know how to mod your bios. ( not with one click bios mode, not with paste and copy mem straps )
Bios hex edited by Me , optimized for ETH mining with the possible lower power consumption with the highest hash rate Wink
There is one of my rig with 10 RX 580 cards and 2 RX 480 , the whole setup pulling 1560 watts at the wall Smiley
The 10 RX580 avg is actually over 31.5MH/s , the 2 RX 480 avg is a little bit over 30MH/s Smiley


On my tests, there is no difference on rx 480 x rx 580 since i downclocked all rx 580 ro rx 480 levels, the 1 to 3% on hashrate is useless x power consumption, not a miner, dont mine, this is just a test I've done last year for a friend, found the best clock x memory concerning hashrate and undervolted. I'd say people having the default 1400 mhz core clock on rx 580 is doing it wrong. Especially in the market right now where electricity costs the most. The idea is to get the best heat sink cooling card, undervolt the most x core clock x memory, find the best hashrate where the medium is found and then leave it be doing its thing.
hero member
Activity: 1498
Merit: 597
I can say for sure , you can do very easy 31.5MH/s avg on ethereum with rx 580 cards, if and only you know how to mod your bios. ( not with one click bios mode, not with paste and copy mem straps )
Bios hex edited by Me , optimized for ETH mining with the possible lower power consumption with the highest hash rate Wink
There is one of my rig with 10 RX 580 cards and 2 RX 480 , the whole setup pulling 1560 watts at the wall Smiley
The 10 RX580 avg is actually over 31.5MH/s , the 2 RX 480 avg is a little bit over 30MH/s Smiley





Pages:
Jump to: