Пpивeт, нa 0.18.0 и 0.19.0 нa bbr пpимepнo 2.5% пaдeниe xeшpeйтa нa вeгax. Haвepнoe и нa 0.17.9 пaдeниe, нaчинaя c нeё кaк paз нaпиcaнo пpo yлyчшeниe нa 1% нa wildkeccak)
0.17.8 и нижe - вcё oк. Peзyльтaт cтaбильнo пoвтopяeмый нa нecкoлькиx pигax, нacтpoйки ecтecтвeннo oдинaкoвыe.
Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 24. (Read 92020 times)
Just did a livestream on twitch.tv today using a Ryzen 7 Gen 3 3700x machine with a 5700 XT (Sapphire)
Note: All memory was left at 1750, no touch; base system was 80-100w on idle.
Maximum Observed Lyra2Rev3 VTC was 82.3mh @ 2000 core 1.15mv @ 420w full system (so 320w from card)
Other Settings and Speeds
74mh @ 1770 core @ 1100mv 300w full system (200w from card)
62mh @ 1575 core @ 900mv 240w full system (140w from card)
56mh @ 1400 core @ 850mv 200w full system (100w from card)
You can rewatch on twitch.tv/bitsbetrippin or by tomorrow a recap video will be posted on YouTube.
Was interesting to watch, thanks for this extended testing Note: All memory was left at 1750, no touch; base system was 80-100w on idle.
Maximum Observed Lyra2Rev3 VTC was 82.3mh @ 2000 core 1.15mv @ 420w full system (so 320w from card)
Other Settings and Speeds
74mh @ 1770 core @ 1100mv 300w full system (200w from card)
62mh @ 1575 core @ 900mv 240w full system (140w from card)
56mh @ 1400 core @ 850mv 200w full system (100w from card)
You can rewatch on twitch.tv/bitsbetrippin or by tomorrow a recap video will be posted on YouTube.
Just did a livestream on twitch.tv today using a Ryzen 7 Gen 3 3700x machine with a 5700 XT (Sapphire)
Note: All memory was left at 1750, no touch; base system was 80-100w on idle.
Maximum Observed Lyra2Rev3 VTC was 82.3mh @ 2000 core 1.15mv @ 420w full system (so 320w from card)
Other Settings and Speeds
74mh @ 1770 core @ 1100mv 300w full system (200w from card)
62mh @ 1575 core @ 900mv 240w full system (140w from card)
56mh @ 1400 core @ 850mv 200w full system (100w from card)
You can rewatch on twitch.tv/bitsbetrippin or by tomorrow a recap video will be posted on YouTube.
Note: All memory was left at 1750, no touch; base system was 80-100w on idle.
Maximum Observed Lyra2Rev3 VTC was 82.3mh @ 2000 core 1.15mv @ 420w full system (so 320w from card)
Other Settings and Speeds
74mh @ 1770 core @ 1100mv 300w full system (200w from card)
62mh @ 1575 core @ 900mv 240w full system (140w from card)
56mh @ 1400 core @ 850mv 200w full system (100w from card)
You can rewatch on twitch.tv/bitsbetrippin or by tomorrow a recap video will be posted on YouTube.
Vega FE: 0.19.0 preview
--algo blake2b-btcc --opencl-threads 2 --opencl-launch auto
hashrate: 10s: 2535 60s: 2533 15m: n/a MH/s max: 2562 MH/s
1409 core 950v / 1100mem 930v I get
[15:49:44] GPU #0 [BusID: #6] [gfx901] Radeon Vega Frontier Edition
[15:49:44] threads: 2, intensity: 29, worksize: 0/256, cu: 64, memory: 16192Mb
[15:51:05] GPU #0[T:60C F:79%]: 10s: 2596 60s: 2596 15m: n/a MH/s
[15:51:05] hashrate: 10s: 2596 60s: 2596 15m: n/a MH/s max: 2597 MH/s
--algo blake2b-btcc --opencl-threads 2 --opencl-launch auto
hashrate: 10s: 2535 60s: 2533 15m: n/a MH/s max: 2562 MH/s
1409 core 950v / 1100mem 930v I get
[15:49:44] GPU #0 [BusID: #6] [gfx901] Radeon Vega Frontier Edition
[15:49:44] threads: 2, intensity: 29, worksize: 0/256, cu: 64, memory: 16192Mb
[15:51:05] GPU #0[T:60C F:79%]: 10s: 2596 60s: 2596 15m: n/a MH/s
[15:51:05] hashrate: 10s: 2596 60s: 2596 15m: n/a MH/s max: 2597 MH/s
Released 0.19.0 preview with RX 5700 series support.
Here some results for stock Sapphire RX 5700 XT(better results can be achieved with undervolt)
blake2b - ~2.1GH/s
lyra2v3 - ~72MH/s
lyra2vc0ban - ~65MH/s
Download and Details
Here some results for stock Sapphire RX 5700 XT(better results can be achieved with undervolt)
blake2b - ~2.1GH/s
lyra2v3 - ~72MH/s
lyra2vc0ban - ~65MH/s
Download and Details
Thank you for the release, here are our results:
Current estimated earnings https://minerstat.com/hardware/amd-rx-5700-xt
Released 0.19.0 preview with RX 5700 series support.
Here some results for stock Sapphire RX 5700 XT(better results can be achieved with undervolt)
blake2b - ~2.1GH/s
lyra2v3 - ~72MH/s
lyra2vc0ban - ~65MH/s
Download and Details
Here some results for stock Sapphire RX 5700 XT(better results can be achieved with undervolt)
blake2b - ~2.1GH/s
lyra2v3 - ~72MH/s
lyra2vc0ban - ~65MH/s
Download and Details
Just wanted to say THANK YOU very much for supporting the hmq1725 algorithm. Espers community SERIOUSLY appreciates it! Will sharing this where I can, great work.
Will sharing this where I can, great work. For Linux amdgpu driver (18.40 or later):
VEGA56 opencl platform = 0
RX580x2,570x5 opencl platform = 1
And, only VEGA recognizes and works, RX series does not work.
In the case of TeamRedMiner, both opencl platform = 0 and 1 are recognized and all work.
Will WildRig Multi not be able to run all GPUs?
Right now there is a known bug with this, yes. And simultaneously only Vega or RX's will work. I will fix it someday later, right now have not much time to work on miner.VEGA56 opencl platform = 0
RX580x2,570x5 opencl platform = 1
And, only VEGA recognizes and works, RX series does not work.
In the case of TeamRedMiner, both opencl platform = 0 and 1 are recognized and all work.
Will WildRig Multi not be able to run all GPUs?
OK.
Thank you while you are busy.
I am waiting until then.
Please do your best from now on at a level that does not overdo it.
For Linux amdgpu driver (18.40 or later):
VEGA56 opencl platform = 0
RX580x2,570x5 opencl platform = 1
And, only VEGA recognizes and works, RX series does not work.
In the case of TeamRedMiner, both opencl platform = 0 and 1 are recognized and all work.
Will WildRig Multi not be able to run all GPUs?
Right now there is a known bug with this, yes. And simultaneously only Vega or RX's will work. I will fix it someday later, right now have not much time to work on miner. VEGA56 opencl platform = 0
RX580x2,570x5 opencl platform = 1
And, only VEGA recognizes and works, RX series does not work.
In the case of TeamRedMiner, both opencl platform = 0 and 1 are recognized and all work.
Will WildRig Multi not be able to run all GPUs?
For Linux amdgpu driver (18.40 or later):
VEGA56 opencl platform = 0
RX580x2,570x5 opencl platform = 1
And, only VEGA recognizes and works, RX series does not work.
In the case of TeamRedMiner, both opencl platform = 0 and 1 are recognized and all work.
Will WildRig Multi not be able to run all GPUs?
VEGA56 opencl platform = 0
RX580x2,570x5 opencl platform = 1
And, only VEGA recognizes and works, RX series does not work.
In the case of TeamRedMiner, both opencl platform = 0 and 1 are recognized and all work.
Will WildRig Multi not be able to run all GPUs?
Yeah that will be awesome having soon support for 5700XT cards 
I will get my 5700XT only around 20-21 july, but will try to investigate some things before that date. Yeah that will be awesome having soon support for 5700XT cards
I will get my 5700XT only around 20-21 july, but will try to investigate some things before that date. I am sure your working on it, but any updates for Kernels on the RX 5700 and 5700 XT? Fresh launch and new Arch, so can't be just a simple "insert code" here...
Good Luck and thank you,
Vega
SerpentXSF
Good Luck and thank you,
Vega
SerpentXSF
Yeah that will be awesome having soon support for 5700XT cards
He's working on it. It's in his discord that he needs to recompile all the kernals.
https://discordapp.com/channels/484987277596950538/517671010221293573
so whats the fastest algo to use to get globaltoken 
??
??
Yeah that will be awesome having soon support for 5700XT cards
I am sure your working on it, but any updates for Kernels on the RX 5700 and 5700 XT? Fresh launch and new Arch, so can't be just a simple "insert code" here...
Good Luck and thank you,
Vega
SerpentXSF
Good Luck and thank you,
Vega
SerpentXSF
0.18.0 beta
- added glt-globalhash algorithm
- implemented --gpu-temp-limit and --gpu-temp-resume parameters
- now additionally to hashrate miner will show GPU temperature, fan speed and uptime
- added parameter --print-power(which will show power consumption per GPU Chip)
- added parameter --benchmark-timeout
Linux version will be later, probably tomorrow
- added glt-globalhash algorithm
- implemented --gpu-temp-limit and --gpu-temp-resume parameters
- now additionally to hashrate miner will show GPU temperature, fan speed and uptime
- added parameter --print-power(which will show power consumption per GPU Chip)
- added parameter --benchmark-timeout
Linux version will be later, probably tomorrow
yeah i tried there miner is rubbish hardly ever works thats why i was hopeing yours did, never mind lol.
does this do verushash??
It's already FPGA territory, so no sense. But you can use miner by monkins1010(if I remember right). If we talk about verushash 2.0, then it's already CPU territory and gpu miners are too slow, but you can try miner by same author. ?
does this do verushash??
? Jump to: