WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 21.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: AhmedMohamed875 on March 28, 2020, 10:28:54 PM

Hello....................

Does version 0.20.5.3 support mining x16r variants on rx 5700 & rx 5700 xt ?, thanks.

Hi, yes. But unfortunately performance is not impressive.

AhmedMohamed875

newbie

Activity: 8

Merit: 0

Hello....................

Does version 0.20.5.3 support mining x16r variants on rx 5700 & rx 5700 xt ?, thanks.

andrucrypt

member

Activity: 724

Merit: 49

0.20.5.2 beta
- fixed rejects on x17r when Hvl is first in hashorder

0.20.5.3 beta
- fixed low difficulty shares on 666pool
- implemented x17r-protocol2 to support other pools(e.g. official mainnet-pool01.ufo.link)

andrucrypt

member

Activity: 724

Merit: 49

0.20.5.1 beta
- one more fix to --split-job logic
- added x17r algorithm for ufo-project
- fixed mtp variants on RX gpu's

ps: looks like --diff-factor 512 should be used for ufo-project, so I release 0.20.5.1

andrucrypt

member

Activity: 724

Merit: 49

Quote from: katar14 on March 14, 2020, 04:12:52 AM

Quote from: andrucrypt on March 13, 2020, 05:03:10 AM

Quote from: katar14 on March 13, 2020, 04:03:28 AM

my old person wildrig 20.1 is acting with drivers radeon-software-adrenalin- 2019-19.11. 3, new wildrig 20.4 is out of order, pobralem the newest drivers ati and is also out of order - he is merging but isn't doing the hash - why?

Hi, unfortunately there is a bug with mtp variants in newer versions of wildrig for RX series. Will be fixed in next release.

When? date?

Was a bit busy last days, will try to prepare something today.

katar14

newbie

Activity: 20

Merit: 0

Quote from: andrucrypt on March 13, 2020, 05:03:10 AM

Quote from: katar14 on March 13, 2020, 04:03:28 AM

my old person wildrig 20.1 is acting with drivers radeon-software-adrenalin- 2019-19.11. 3, new wildrig 20.4 is out of order, pobralem the newest drivers ati and is also out of order - he is merging but isn't doing the hash - why?

Hi, unfortunately there is a bug with mtp variants in newer versions of wildrig for RX series. Will be fixed in next release.

When? date?

katar14

newbie

Activity: 20

Merit: 0

Quote from: andrucrypt on March 13, 2020, 05:03:10 AM

Quote from: katar14 on March 13, 2020, 04:03:28 AM

my old person wildrig 20.1 is acting with drivers radeon-software-adrenalin- 2019-19.11. 3, new wildrig 20.4 is out of order, pobralem the newest drivers ati and is also out of order - he is merging but isn't doing the hash - why?

Hi, unfortunately there is a bug with mtp variants in newer versions of wildrig for RX series. Will be fixed in next release.

Super !!!!! Thank you

andrucrypt

member

Activity: 724

Merit: 49

Quote from: katar14 on March 13, 2020, 04:03:28 AM

my old person wildrig 20.1 is acting with drivers radeon-software-adrenalin- 2019-19.11. 3, new wildrig 20.4 is out of order, pobralem the newest drivers ati and is also out of order - he is merging but isn't doing the hash - why?

Hi, unfortunately there is a bug with mtp variants in newer versions of wildrig for RX series. Will be fixed in next release.

katar14

newbie

Activity: 20

Merit: 0

my old person wildrig 20.1 is acting with drivers radeon-software-adrenalin- 2019-19.11. 3, new wildrig 20.4 is out of order, pobralem the newest drivers ati and is also out of order - he is merging but isn't doing the hash - why?
https://images92.fotosik.pl/331/544f51ffa9bceb50.jpg

andrucrypt

member

Activity: 724

Merit: 49

0.20.4 beta
- fixed regression of lyra2 variants on Navi

regression was because of AMD OpenCL compiler that produced less optimized kernels %) Now Navi gpu's hashes lyra2v3 again with full speed as before.

andrucrypt

member

Activity: 724

Merit: 49

0.20.3 beta
- enabled all algorithms for Navi
- fixed lyra2 kernels for Navi
- fixed logic of --split-job parameter(important fix for mtp-tcr)

Unfortunately fixed Lyra2 kernel lowered speed on Navi. Instead of 72MH/s now only 58MH/s on reference 5700XT. Also all other algorithms enabled "as is", hashrate won't be much and settle in the middle of RX590 and Vega56. Using just OpenCL compiler doesn't work well for Navi's.

Linux build postponed once again.

andrucrypt

member

Activity: 724

Merit: 49

0.20.2 beta
- added lyra2tdc
- decreased memory usage for hex(should be possible to increase intensity on some cards and get better hashrate)
- fixed client.reconnect
- fixed crashes in some cases if use --opencl-threads 1

Linux build probably will be available with next release.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: JJ_crypto on February 25, 2020, 04:02:10 PM

for vga Radeon 5700XT support too..?
I see there but for perfomance not seen..

Supported, but for a limited amount of algorithms. Lyra2v3, MTP, Skunkhash and simple ones(like sha256 variants, bmw512 and blake2b variants). I can enable all other algorithms, but results far from that this card can get. Need to rework a lot of OpenCL code to make new AMD OpenCL compiler produce better asm code.

JJ_crypto

copper member

Activity: 3

Merit: 0

for vga Radeon 5700XT support too..?
I see there but for perfomance not seen..

andrucrypt

member

Activity: 724

Merit: 49

Quote from: Exadro on January 29, 2020, 11:41:19 PM

I use amd rx570 8g, and that is only 1 on my computer. why when I run wilrig vga I can't read and whereas only the default gpu is read from my computer? are there any other tutorials or solutions from this

sorry for a long response... %) Currently there is a known bug, and I think you have it - wildrig on Linux can see only RX gpu's or Vega GPU's, if you have both of them installed. For some reason Linux uses different OpenCL platforms for those cards, and I didn't implement support for such scenario.

Exadro

jr. member

Activity: 194

Merit: 1

I use amd rx570 8g, and that is only 1 on my computer. why when I run wilrig vga I can't read and whereas only the default gpu is read from my computer? are there any other tutorials or solutions from this

chinguyensg

newbie

Activity: 46

Merit: 0

I want to use WildRig for mining mtp-tcr but it has an error: "application have been blocked from accessing graphics hardware" then it stops working.

I tried to re-install driver, edit something in registry but no luck. Please help me.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: VirosaGITS on December 17, 2019, 05:21:30 PM

I tried bmw512 on v0.15 and the latest. The miner remain idle indefinitively. This is on ethOS. Thoughts?

Code:

* VERSIONS: WildRig/0.20.1.0 beta libuv/1.29.1 OpenCL/2.0 gcc/5.4.0
* ALGO: bmw512
* POOL #1: bmw512.mine.zpool.ca:5787
{...}
[16:18:04] initializing GPUs...
[16:18:04] GPU #0 [BusID: #1] [Ellesmere] Radeon RX 580 Series
[16:18:04] threads: 1, intensity: 27, worksize: 64/256, cu: 36, mem: 8184Mb
{...}
[16:18:05] Failed to obtain all required ADL function pointers
[16:18:05] AMD hardware monitoring disabled
[16:18:13] GPU #0[T:0C F: 0%]: 10s: n/a 60s: n/a 15m: n/a MH/s

zpool removed bmw512 from their pool, try to use zergpool

Quote from: ?? on ??

Пpивeт, oбнoвилcя c 0.19.1 нa 0.20.1 - пoявилиcь битыe шapы (incorrect). Taкoй peзyльтaт нa нecкoлькиx pигax (wildkeccak, вeги 56), peзyльтaт cтaбильнo пoвтopяeмый, экcпepимeнтиpoвaл нecкoлькo днeй.
Ha 0.19.1 ни oднoй битoй нa дecятки тыcяч шap, a нa 0.20.0 пpимepнo 0.5% (30-50 штyк нa дecять тыcяч).
Чтo былo в пpoмeжyтoчныx вepcияx мeждy этими двyмя - xз

бyдy пocмoтpeть в cлeдyющeм гoдy ) Кoe-чeгo мeнял в aпдeйтe cкpaтчпaдa, видимo пepecтapaлcя.

VirosaGITS

legendary

Activity: 1302

Merit: 1068

I tried bmw512 on v0.15 and the latest. The miner remain idle indefinitively. This is on ethOS. Thoughts?

Code:

* VERSIONS: WildRig/0.20.1.0 beta libuv/1.29.1 OpenCL/2.0 gcc/5.4.0
* ALGO: bmw512
* POOL #1: bmw512.mine.zpool.ca:5787
{...}
[16:18:04] initializing GPUs...
[16:18:04] GPU #0 [BusID: #1] [Ellesmere] Radeon RX 580 Series
[16:18:04] threads: 1, intensity: 27, worksize: 64/256, cu: 36, mem: 8184Mb
{...}
[16:18:05] Failed to obtain all required ADL function pointers
[16:18:05] AMD hardware monitoring disabled
[16:18:13] GPU #0[T:0C F: 0%]: 10s: n/a 60s: n/a 15m: n/a MH/s

andrucrypt

member

Activity: 724

Merit: 49

Quote from: zubzero23 on November 27, 2019, 05:51:58 AM

How to remove one VGA card in the batch file?

Use --opencl-devices, e.g. --opencl-devices 0,1,2 will use only first, second and third GPU in system

Иcпoльзyй --opencl-devices, нaпpимep --opencl-devices 0,1,2 бyдeт иcпoльзoвaть тoлькo пepвyю, втopyю и тpeтью видeoкapтy в cиcтeмe.

Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 21. (Read 92264 times)