0.17.7 beta
- donation for honeycomb now can be reduced to 1%
- slightly improved different algorithms for Vega cards(e.g. honeycomb up to 3%)
0.17.8 beta
- improved blake2b family(lower power consumption on pre-Vega gpu's and higher hashrate on Vega gpu's)
Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 26. (Read 92020 times)
what are the changes in version 0.17.6?
you can always check github releases page or first post at changelog section 
Sometimes I don't post here new messages if release with minor changes.
what are the changes in version 0.17.6?
hi can you add neoscrypt please?
i was hoping for MTP : / lol i feel like maybe AMD can really shine on MTP, but there's no good optimized public miners.
miner devs if you see this, get on that shit
money to be made man hi can you add neoscrypt please?
i was hoping for MTP : / lol i feel like maybe AMD can really shine on MTP, but there's no good optimized public miners.
miner devs if you see this, get on that shit
money to be made man hi can you add neoscrypt please?
i was hoping for MTP : / lol i feel like maybe AMD can really shine on MTP, but there's no good optimized public miners.
miner devs if you see this, get on that shit
money to be made man
hi can you add neoscrypt please?
Taras700
You want config for ethos ?
You want config for ethos ?
how can I enable backup pools on it
just use multiple url, user and pass parameters:Code:
--url POOL1 --user WALLET1 --pass PASSWORD1 --url POOL2 --user WALLET2 --pass PASSWORD2
how can I enable backup pools on it
So i find the problem why it was crashing
The H110 has
1 PCIe 3.0 x16, 12 PCIe 2.0 x1
I used only the PCIe 2.0 slots
---
I changed the riser cable of one of my GPU's to the PCIe 3.0 slot.
And the problem was solved.
The H110 has
1 PCIe 3.0 x16, 12 PCIe 2.0 x1
I used only the PCIe 2.0 slots
---
I changed the riser cable of one of my GPU's to the PCIe 3.0 slot.
And the problem was solved.
How to overclock ?
With software or BIOS
With software or BIOS
why dont you overclock your cpu it will help.
I have 4 x Ellesmere AMD RX 570 / 4GB 115-C940PI0-100 SK Hynix - Modded.
Mining with X16RT on http://gin.altpool.pro with ethos.
Wildrig version : WildRig 0.15.3.8
This is my setting for now, when i set the intensity higher 2 GPU's hang after 4/5 minutes
My CPU increases fast with higher intensity
https://cdn1.imggmi.com/uploads/2019/6/14/89fefa843311947f2c7c221fd36ca81a-full.png
Now with the setting in the picture.
CPU LOAD goes up but slowly.
now 47 min. up CPU load = 56% and raising very slowly
Speed total 20mhz up to 25mhz it drops back to 20mhz.
now after 1 hour 4 min.
speed 30 Mhz. cpu load 56.9%
2min later
it drops back to 21Mhz
and it wil go up slowly agian
Here a image of my hashrate chart. on the pool.
https://cdn1.imggmi.com/uploads/2019/6/14/bcf00eeaa3f7db8d3d233870de015b8f-full.jpg
this is an image of the watts. when I is set to 16 it will hang GPU2
https://cdn1.imggmi.com/uploads/2019/6/14/7810bb5073b221b8ed3d030333effdd4-full.jpg
i have a CPU intel I3 - Gen5 - Motherboard H110 Pro BTC+
----
How i can reduce my CPU Load
so that when i mine with higher intensity my GPU will not hang.
Mining with X16RT on http://gin.altpool.pro with ethos.
Wildrig version : WildRig 0.15.3.8
This is my setting for now, when i set the intensity higher 2 GPU's hang after 4/5 minutes
My CPU increases fast with higher intensity
https://cdn1.imggmi.com/uploads/2019/6/14/89fefa843311947f2c7c221fd36ca81a-full.png
Now with the setting in the picture.
CPU LOAD goes up but slowly.
now 47 min. up CPU load = 56% and raising very slowly
Speed total 20mhz up to 25mhz it drops back to 20mhz.
now after 1 hour 4 min.
speed 30 Mhz. cpu load 56.9%
2min later
it drops back to 21Mhz
and it wil go up slowly agian
Here a image of my hashrate chart. on the pool.
https://cdn1.imggmi.com/uploads/2019/6/14/bcf00eeaa3f7db8d3d233870de015b8f-full.jpg
this is an image of the watts. when I is set to 16 it will hang GPU2
https://cdn1.imggmi.com/uploads/2019/6/14/7810bb5073b221b8ed3d030333effdd4-full.jpg
i have a CPU intel I3 - Gen5 - Motherboard H110 Pro BTC+
----
How i can reduce my CPU Load
so that when i mine with higher intensity my GPU will not hang.0.17.5 beta
- blake2b-btcc(BTCC and BitcoinX) and blake2b-glt(GlobalToken) algorithms
- fixed gfx907(some Radeon VII gpu's) support
be careful, blake2b algorithms pretty hot
- blake2b-btcc(BTCC and BitcoinX) and blake2b-glt(GlobalToken) algorithms
- fixed gfx907(some Radeon VII gpu's) support
be careful, blake2b algorithms pretty hot
ok now its hashing but all my shares are getting rejected. reason give is unauthorized worker. but i know all my settings are correct
0.17.5 beta
- blake2b-btcc(BTCC and BitcoinX) and blake2b-glt(GlobalToken) algorithms
- fixed gfx907(some Radeon VII gpu's) support
be careful, blake2b algorithms pretty hot
- blake2b-btcc(BTCC and BitcoinX) and blake2b-glt(GlobalToken) algorithms
- fixed gfx907(some Radeon VII gpu's) support
be careful, blake2b algorithms pretty hot
ok now its hashing but all my shares are getting rejected. reason give is unauthorized worker. but i know all my settings are correct
0.17.5 beta
- blake2b-btcc(BTCC and BitcoinX) and blake2b-glt(GlobalToken) algorithms
- fixed gfx907(some Radeon VII gpu's) support
be careful, blake2b algorithms pretty hot
- blake2b-btcc(BTCC and BitcoinX) and blake2b-glt(GlobalToken) algorithms
- fixed gfx907(some Radeon VII gpu's) support
be careful, blake2b algorithms pretty hot
I have tried the last 3 versions, I get a message amd (gfx907) architecture not supported. Using AMD 19.5.1 drivers. I’ll try running DDU and reinstall drivers when I have time. But I have no issues using any other miners for mining beam/eth/XmR
That miners use OpenCL kernels with compiling it using your drivers, and wildrig uses binary kernels. And as always, AMD have a lot of surprises... Previous drivers were saying that Radeon VII is gfx906, and now it's gfx907. Or maybe you have different revision of Radeon VII. Anyway, ok, this will be fixed someday later. Unfortunately I have already released 0.17.5 today, but didn't notice your new comment.update: re-uploaded fixed build with the same version, you can try 0.17.5 now
[2019-06-11 02:03:27] initializing GPUs...
[2019-06-11 02:03:27] GPU #0 [BusID: #16] [gfx907] AMD Radeon VII
[2019-06-11 02:03:27] threads: 2, intensity: 20, worksize: 128/256, cu: 60, memory: 16192Mb
[2019-06-11 02:03:28] architecture "gfx907" not supported
[2019-06-11 02:03:28] Failed to start OpenCL threads
[2019-06-11 02:03:27] GPU #0 [BusID: #16] [gfx907] AMD Radeon VII
[2019-06-11 02:03:27] threads: 2, intensity: 20, worksize: 128/256, cu: 60, memory: 16192Mb
[2019-06-11 02:03:28] architecture "gfx907" not supported
[2019-06-11 02:03:28] Failed to start OpenCL threads
Hi, it tells me that my GPU isnt supported, using Radeon VII. It clearly shows that VII should work with your miner. what am i doing wrong?
I need more details. Like what version of WildRig, what OS and what drivers do you use? And all info from miner when you get the error(you can use --log log.txt as additional parameter).I have tried the last 3 versions, I get a message amd (gfx907) architecture not supported. Using AMD 19.5.1 drivers. I’ll try running DDU and reinstall drivers when I have time. But I have no issues using any other miners for mining beam/eth/XmR
Jump to: