WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 61.

Quake4

member

Activity: 825

Merit: 18

MindMiner developer

Code:

 * VERSIONS:     WildRig/0.12.1.1 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz x64 AES-NI
 * ALGO:         aergo
 * POOL #1:      aergo.eu.mine.zpool.ca:3691
 * API PORT:     4028
 * COMMANDS:     hashrate, pause, resume
[10:07:45] donation: 2%
[10:07:45] strategy: 0
[10:07:45] send-stale: no
[10:07:45] watchdog: disabled
[10:07:45] good-risers: default
[10:07:45] compiling code and initializing GPUs. This will take a while...
[10:07:45] GPU #0 [BusID: #1] Radeon RX 560 Series
[10:07:45] kernel: Baffin, intensity: 19, worksize: 128/256, cu: 16
[10:07:47] use pool aergo.eu.mine.zpool.ca:3691 51.38.99.97
[10:07:47] Stratum set difficulty to 0.0010
[10:07:59] new job from aergo.eu.mine.zpool.ca:3691 diff 4.30M
[10:08:12] rejected(0/1) diff 4.30M "Invalid share" (130 ms)
[10:08:19] rejected(0/2) diff 4.30M "Invalid share" (130 ms)
[10:08:20] new job from aergo.eu.mine.zpool.ca:3691 diff 4.30M
[10:08:25] rejected(0/3) diff 4.30M "Invalid share" (131 ms)
[10:08:29] rejected(0/4) diff 4.30M "Invalid share" (131 ms)

Code:

* VERSIONS:     WildRig/0.12.1.1 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz x64 AES-NI
 * ALGO:         c11
 * POOL #1:      c11.eu.mine.zpool.ca:3573
 * API PORT:     4028
 * COMMANDS:     hashrate, pause, resume
[10:15:58] donation: 2%
[10:15:58] strategy: 0
[10:15:58] send-stale: no
[10:15:58] watchdog: disabled
[10:15:58] good-risers: default
[10:15:58] compiling code and initializing GPUs. This will take a while...
[10:15:58] GPU #0 [BusID: #1] Radeon RX 560 Series
[10:15:58] kernel: Baffin, intensity: 17, worksize: 128/256, cu: 16
[10:15:59] use pool c11.eu.mine.zpool.ca:3573 51.38.99.97
[10:15:59] Stratum set difficulty to 0.0160
[10:16:03] new job from c11.eu.mine.zpool.ca:3573 diff 68.72M
[10:16:06] accepted(1/0) diff 68.72M avg. effort 18.31% (126 ms)
[10:16:08] accepted(2/0) diff 68.72M avg. effort 16.59% (127 ms)
[10:16:14] [c11.eu.mine.zpool.ca:3573] unsupported method: "mining.set_extranonce"
[10:16:14] new job from c11.eu.mine.zpool.ca:3573 diff 68.72M
[10:16:16] new job from c11.eu.mine.zpool.ca:3573 diff 68.72M
[10:16:20] rejected(2/1) diff 68.72M "Invalid extranonce2 size" (127 ms)
[10:16:23] [c11.eu.mine.zpool.ca:3573] unsupported method: "mining.set_extranonce"
[10:16:23] new job from c11.eu.mine.zpool.ca:3573 diff 68.72M

whats wrong?

Quake4

member

Activity: 825

Merit: 18

MindMiner developer

Quote from: andrucrypt on October 15, 2018, 05:41:21 PM

Yeah... nicehash is not supported yet(have no time to check why that happens right now)

Please, fix it.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: andrucrypt on October 15, 2018, 05:41:21 PM

Quote from: Divinity666 on October 15, 2018, 04:21:27 PM

Quote

@echo off

:loop
wildrig.exe --algo x16r --opencl-launch=18x128 --url=stratum+tcp://x16r.eu.nicehash.com:3366 --user=__ --pass=x
if ERRORLEVEL 1000 goto custom
timeout /t 5
goto loop

:custom
echo Custom command here
timeout /t 5
goto loop

Yeah... nicehash is not supported yet(have no time to check why that happens right now), so you don't get any job for hashing. Will mention this in known issue section.

and here i was thinking that the x16r just didn't work... my x16r pool is nicehash. i used avermore, sgminerkl, sgminermk for x16r on nicehash. Having it work on nicehash would be great.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: Divinity666 on October 15, 2018, 04:21:27 PM

Quote

@echo off

:loop
wildrig.exe --algo x16r --opencl-launch=18x128 --url=stratum+tcp://x16r.eu.nicehash.com:3366 --user=__ --pass=x
if ERRORLEVEL 1000 goto custom
timeout /t 5
goto loop

:custom
echo Custom command here
timeout /t 5
goto loop

Yeah... nicehash is not supported yet(have no time to check why that happens right now), so you don't get any job for hashing. Will mention this in known issue section.

Divinity666

jr. member

Activity: 312

Merit: 2

Quote

@echo off

:loop
wildrig.exe --algo x16r --opencl-launch=18x128 --url=stratum+tcp://x16r.eu.nicehash.com:3366 --user=__ --pass=x
if ERRORLEVEL 1000 goto custom
timeout /t 5
goto loop

:custom
echo Custom command here
timeout /t 5
goto loop

andrucrypt

member

Activity: 724

Merit: 49

Quote from: Divinity666 on October 15, 2018, 02:55:56 PM

Initially they run stock clock and undervolted to be stable in games plus they all 60CU(50% unlock), so voltage is very high for mining anyway. I've tried stock voltage which is over 1200mv - it doest matter, besides even undervolted cards don't crash so being undervolted seems like impossible cause to me - they would have just crash after starting mining, but the thing is they don't even start in the first place.

Ps I tried mining x16r with sgminer - no problems there. So no issues with the cards themselves I guess.

Can you share your bat-file(please, use tag code)? And any screenshot? I assume something is wrong with it, or there is no even new job from pool for hashing.

Divinity666

jr. member

Activity: 312

Merit: 2

Initially they run stock clock and undervolted to be stable in games plus they all 60CU(50% unlock), so voltage is very high for mining anyway. I've tried stock voltage which is over 1200mv - it doest matter, besides even undervolted cards don't crash so being undervolted seems like impossible cause to me - they would have just crash after starting mining, but the thing is they don't even start in the first place.

Ps I tried mining x16r with sgminer - no problems there. So no issues with the cards themselves I guess.

andrucrypt

member

Activity: 724

Merit: 49

Any OC or undervolt? Can you try stock settings?

Divinity666

jr. member

Activity: 312

Merit: 2

I tried --opencl-launch 18x0 and 18x128

andrucrypt

member

Activity: 724

Merit: 49

Quote from: Divinity666 on October 15, 2018, 01:32:03 PM

Quote from: andrucrypt on October 15, 2018, 12:50:37 PM

Hash file? O_o Are you sure you run wildrig?

Sorry, just a wrong expression, miner says compiling code and initializing GPUs etc.. Then it shows speeds of 0kH\s for every card and I just see in monitoring that they have no load at all.

What parameters do you use? Did you try default one like just --opencl-launch 18x0 without --opencl-threads?

Divinity666

jr. member

Activity: 312

Merit: 2

Quote from: andrucrypt on October 15, 2018, 12:50:37 PM

Hash file? O_o Are you sure you run wildrig?

Sorry, just a wrong expression, miner says compiling code and initializing GPUs etc.. Then it shows speeds of 0kH\s for every card and I just see in monitoring that they have no load at all.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: Divinity666 on October 15, 2018, 11:19:51 AM

Tried to run this miner to mine x16r with my Furies, but it will just generate hash file forever. So does it support them or not? Drivers are 18.6.1, win10.

Hash file? O_o Are you sure you run wildrig?

andrucrypt

member

Activity: 724

Merit: 49

Quote from: divasoft on October 15, 2018, 11:14:16 AM

Quote from: andrucrypt on October 02, 2018, 02:50:07 AM

Quote from: C3Sector on October 02, 2018, 02:17:38 AM

Hey there does it support gpus like HD7850 ?

thanks.

Hi, try this archive(unpack bin-files into folder with miner). Although I don't know if it works correctly, need to test.

update: link removed, seems kernels don't work, need to check everything, but I have no so old card...

Can you share this link for Tahiti again?

That kernels were not working, because Tahiti are big endian architecture and without such card I can't test and prepare correct version of kernels.

Divinity666

jr. member

Activity: 312

Merit: 2

Tried to run this miner to mine x16r with my Furies, but it will just generate hash file forever. So does it support them or not? Drivers are 18.6.1, win10.

divasoft

newbie

Activity: 5

Merit: 0

Quote from: andrucrypt on October 02, 2018, 02:50:07 AM

Quote from: C3Sector on October 02, 2018, 02:17:38 AM

Hey there does it support gpus like HD7850 ?

thanks.

Hi, try this archive(unpack bin-files into folder with miner). Although I don't know if it works correctly, need to test.

update: link removed, seems kernels don't work, need to check everything, but I have no so old card...

Can you share this link for Tahiti again?

divasoft

newbie

Activity: 5

Merit: 0

Quote from: U4guk on September 25, 2018, 02:45:52 AM

Quote from: Agent009 on September 18, 2018, 12:25:55 PM

andrucrypt, can you please add kernel for Tahiti videocards?
It's R9270,270x,280x etc..

+1

alizali

newbie

Activity: 197

Merit: 0

hi all
for c11 algo for rx 470 how much for core/memory/voltage would be the best?

emiliano3

newbie

Activity: 10

Merit: 0

Quote

Tested on my cards with optimal parameters. OS: Windows 7; Used drivers: 18.6.1 Cards are modified this way:
RX460: MSI RX460 2Gb with unlocked compute units, stock clocks(1210Mhz/1750Mhz), timings from 1500 strap
RX470: XFX RX470 4Gb, stock clocks(1256Mhz/1750Mhz), timings from 1500 strap
RX570: GIGABYTE RX570 GAMING 4Gb, stock clocks(1244Mhz/1750Mhz), timings from 1500 strap
RX580: SAPPHIRE RX580 PULSE 4Gb, stock clocks(1366Mhz/1750Mhz), timings from 1500 strap

SUPPORTED GPU's:
- Baffin: RX460, RX560 and some RX550
- Ellesmere: RX470, RX480, RX570 and RX580
- gfx900: Vega 56/64
- Fiji, Hawaii, Tonga: old cards like R9 290/390/Fury(download separate archive for Hawaii support)

hi men, im use this program and he is good men!! im use 1 MSI Rx 480 8GB and i take 10.7 MHs in Renesis Algo
thanks for the project

image of the program on my PC
https://uploaddeimagens.com.br/imagens/sem_titulo-jpg-77939524-3168-4c78-a1c9-9f9b2be0efae

andrucrypt

member

Activity: 724

Merit: 49

Quote from: FFI2013 on October 12, 2018, 06:20:48 AM

Is it better to run my gpu's with modded bios or stock just asking because I flashed my rigs back to stock for 16r and phi2

Mostly supported algorithms are core intensive, but having good timings for memory can improve hashrate a bit. And definitely some improvement should be seen for algo's like hex and hmq1725.

FFI2013

hero member

Activity: 906

Merit: 507

Is it better to run my gpu's with modded bios or stock just asking because I flashed my rigs back to stock for 16r and phi2

Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 61. (Read 92264 times)