WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 57.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: cantr on October 31, 2018, 04:25:24 PM

Firstly; thank you for new version 0.12.7 beta.

tried and worked well! Regards.

But my hashrate for Sapphire Nitro RX570 4 Gb Hynix - x22i - 3,1 Mhs

I am waiting information abouth best oc & other settings.

Did you try optimal parameters I have shared in OP? Also this is not bad result, if you are running your gpu with some undervolt/underclock. My tests are done for stock clocks and modified timings for memory.

cantr

member

Activity: 124

Merit: 10

Firstly; thank you for new version 0.12.7 beta.

tried and worked well! Regards.

But my hashrate for Sapphire Nitro RX570 4 Gb Hynix - x22i - 3,1 Mhs

I am waiting information abouth best oc & other settings.

andrucrypt

member

Activity: 724

Merit: 49

0.12.7 beta
- fixed low hashrate on Vega cards
- more improvements to x22i
- now higher intensity can be set

NOTE: don't forget to check updated OPTIMAL SETTINGS section with new optimal parameters for this version
anilkilic, hizzy2023 try this new build, it should consume less memory.

anilkilic

newbie

Activity: 8

Merit: 0

Quote from: hizzy2023 on October 31, 2018, 09:51:17 AM

i get Error CL_OUT_OF_HOST_MEMORY when calling clCreateCommandQueueWithProperties in red when i try custom hiveos installer and try to run it. Any ideas?

I am getting this error too.

Quote from: andrucrypt on October 30, 2018, 06:38:48 PM

Quote from: anilkilic on October 30, 2018, 06:24:59 PM

https://i.hizliresim.com/7D9NXP.jpg
HIVEOS
I am getting same error both 10 x rx 580 and 12 x rx 560 rigs. Whats missing?

I can't open the screen, but I guess you are missing dependencies, just run this:

Code:

apt install libuv1 libmicrohttpd10

no its CL_OUT_OF_HOST_MEMORY when calling clCreateCommandQueueWithProperties and i already have this dependecies Angry

andrucrypt

member

Activity: 724

Merit: 49

Quote from: melloyellow on October 31, 2018, 10:50:47 AM

Quote from: andrucrypt on October 30, 2018, 06:44:21 PM

Quote from: melloyellow on October 30, 2018, 05:43:40 PM

Is it possible for you to optimize the hawaii kernels any further?
The best I could get for a non-reference 290x was 2.9 mh/s for hmq1725 for example, somewhere between a 460 and 470.
And 2.14 mh/s on x22i though I haven't tried 12.6 yet.
My reference 290x will probably fair better but not by much.
Thanks.

Old hardware like Hawaii needs special techniques, and without having those cards I can't do a lot here... Anyway, did you try different opencl-launch parameters? Old cards like higher worksize(e.g. try 20x256 instead of 20x128 and so on) and maybe better to use lower intensity or higher(that number 20)

I have played around with all the settings. In general they do seem to like 256 but with 2 threads and yes intensity around 20 is best.
Sucks, I know these cards are much more capable than the speeds I can do now but I can't write code. Thanks for providing the kernels
and thinking of us older guys at least. I'll keep posting my hashrates as I go along, maybe someone will come up with better settings...

hmq1725 : 2.9 mh/s
x22i : 2.3 mh/s
x16r : 5 mh/s estimated, due to the random order

Today I will release new build with x22i improvements, and I hope it will increase hashrate a lot for Hawaii, same as for Vega cards

melloyellow

full member

Activity: 176

Merit: 100

Quote from: andrucrypt on October 30, 2018, 06:44:21 PM

Quote from: melloyellow on October 30, 2018, 05:43:40 PM

Is it possible for you to optimize the hawaii kernels any further?
The best I could get for a non-reference 290x was 2.9 mh/s for hmq1725 for example, somewhere between a 460 and 470.
And 2.14 mh/s on x22i though I haven't tried 12.6 yet.
My reference 290x will probably fair better but not by much.
Thanks.

Old hardware like Hawaii needs special techniques, and without having those cards I can't do a lot here... Anyway, did you try different opencl-launch parameters? Old cards like higher worksize(e.g. try 20x256 instead of 20x128 and so on) and maybe better to use lower intensity or higher(that number 20)

I have played around with all the settings. In general they do seem to like 256 but with 2 threads and yes intensity around 20 is best.
Sucks, I know these cards are much more capable than the speeds I can do now but I can't write code. Thanks for providing the kernels
and thinking of us older guys at least. I'll keep posting my hashrates as I go along, maybe someone will come up with better settings...

hmq1725 : 2.9 mh/s
x22i : 2.3 mh/s
x16r : 5 mh/s estimated, due to the random order

dragonmike

hero member

Activity: 1274

Merit: 556

I've got 7 GPUs on some rigs.
If I don't specify --opencl-devices=7, the first GPU will hash but without the thread, intensity and worksize parameters I assign. It'll just use defaults.
If I do specify --opencl-devices=7, miner will not initialise and keep looping the start procedure.

Bleh, ignore me, I typed the opencl-config parameters twice in the same batch file Tongue

hizzy2023

newbie

Activity: 30

Merit: 0

i get Error CL_OUT_OF_HOST_MEMORY when calling clCreateCommandQueueWithProperties in red when i try custom hiveos installer and try to run it. Any ideas?

andrucrypt

member

Activity: 724

Merit: 49

Quote from: jtmillican on October 30, 2018, 08:34:22 PM

Not sure how to set this up on HiveOS. Asking me for a URL to miner download. Is one available? Any advice appreciated.

Check OP post, there is a link HiveOS asks you

andrucrypt

member

Activity: 724

Merit: 49

Quote from: JK2206 on October 30, 2018, 11:31:51 PM

I've got a rig of mainly rx580s but also rx460 when I try recommended --opencl-threads 3 --opencl-launch 18x128 or 20x128 the rx580s run great but my rx460 dies stops hashing shows n/a and have to reboot the rig to bring it back up if I don't use any extra parameters the rx460 hashes but the rest don't seem to be optimized

What algo? Not all can run 3 threads. Also, most of algo's need higher voltaqe for gpu's, so give that info too please.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: ETminer on October 30, 2018, 07:43:32 PM

For x22i, I'm seeing mid 3000 kH/s for both rx570s and rx Vegas across a variety of intensity/worksize settings. I would have expected to get more hash out of a Vega. Is anyone seeing anything similar or doing better with this algo?

card cclck/v mclck/v int/work hash/s
-------------------------------------------------------------
rx570 8GB 1250/900mv 2100/860mV 19x0 3400
Vega 56 1527/930mv 910/910mv 21x256 3300
Vega 64 1632/950mv 1025/930mv 21x256 3800

Power consumption is pretty good, though. Getting 800W at the wall with 3 Vegas and 2 rx570s.

--ET

Looks like there some specific thing with Vega, working to fix that. Thanks for tests!

justoiurii

newbie

Activity: 103

Merit: 0

WOW! Well done, Master! Was 18,8 Mh, now - 21,3. Locking the same. RX480, bc driver

JK2206

newbie

Activity: 2

Merit: 0

I've got a rig of mainly rx580s but also rx460 when I try recommended --opencl-threads 3 --opencl-launch 18x128 or 20x128 the rx580s run great but my rx460 dies stops hashing shows n/a and have to reboot the rig to bring it back up if I don't use any extra parameters the rx460 hashes but the rest don't seem to be optimized

jtmillican

newbie

Activity: 31

Merit: 0

Not sure how to set this up on HiveOS. Asking me for a URL to miner download. Is one available? Any advice appreciated.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: ETminer on October 30, 2018, 07:43:32 PM

For x22i, I'm seeing mid 3000 kH/s for both rx570s and rx Vegas across a variety of intensity/worksize settings. I would have expected to get more hash out of a Vega. Is anyone seeing anything similar or doing better with this algo?

card cclck/v mclck/v int/work hash/s
-------------------------------------------------------------
rx570 8GB 1250/900mv 2100/860mV 19x0 3400
Vega 56 1527/930mv 910/910mv 21x256 3300
Vega 64 1632/950mv 1025/930mv 21x256 3800

Power consumption is pretty good, though. Getting 800W at the wall with 3 Vegas and 2 rx570s.

--ET

I get 5500 on my vega 64 with stock voltages and mem clock set to 1000 with 18x0 two threads with version 0.12.5.1.. haven't tried with 12.6 yet with those settings

update:
i just rebenched my vega64 with stock voltages, mem clock set to 1000 with 18x0 two threads with version 12.5.1 i get 5500 hash.
with 12.6 with same settings i get 3850 hash...

both done with win10 pro x64, and 18.10.2 drivers with hbcc set to off. i ran a test earlier with hbcc on and was slightly less. less than 1%. I keep hbcc off now because of cvn8

hizzy2023

newbie

Activity: 30

Merit: 0

Why is Linux version in .7z format? How to unpack that?

ETminer

newbie

Activity: 3

Merit: 0

For x22i, I'm seeing mid 3000 kH/s for both rx570s and rx Vegas across a variety of intensity/worksize settings. I would have expected to get more hash out of a Vega. Is anyone seeing anything similar or doing better with this algo?

card cclck/v mclck/v int/work hash/s
-------------------------------------------------------------
rx570 8GB 1250/900mv 2100/860mV 19x0 3400
Vega 56 1527/930mv 910/910mv 21x256 3300
Vega 64 1632/950mv 1025/930mv 21x256 3800

Power consumption is pretty good, though. Getting 800W at the wall with 3 Vegas and 2 rx570s.

--ET

andrucrypt

member

Activity: 724

Merit: 49

Quote from: melloyellow on October 30, 2018, 05:43:40 PM

Is it possible for you to optimize the hawaii kernels any further?
The best I could get for a non-reference 290x was 2.9 mh/s for hmq1725 for example, somewhere between a 460 and 470.
And 2.14 mh/s on x22i though I haven't tried 12.6 yet.
My reference 290x will probably fair better but not by much.
Thanks.

Old hardware like Hawaii needs special techniques, and without having those cards I can't do a lot here... Anyway, did you try different opencl-launch parameters? Old cards like higher worksize(e.g. try 20x256 instead of 20x128 and so on) and maybe better to use lower intensity or higher(that number 20)

andrucrypt

member

Activity: 724

Merit: 49

Quote from: anilkilic on October 30, 2018, 06:24:59 PM

HIVEOS
I am getting same error both 10 x rx 580 and 12 x rx 560 rigs. Whats missing?

I can't open the screen, but I guess you are missing dependencies, just run this:

Code:

apt install libuv1 libmicrohttpd10

anilkilic

newbie

Activity: 8

Merit: 0

https://i.hizliresim.com/7D9NXP.jpg
HIVEOS
I am getting same error both 10 x rx 580 and 12 x rx 560 rigs. Whats missing?

Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 57. (Read 92264 times)