Topic: Windows mining monitoring tool - v2-BETA [OPEN BETA] - page 29. (Read 104819 times)
Please help - http://www.imgup.cz/image/LF3v
Your config file is not a valid json.
You should have do a mistake.
Check it on online json editor.
Exemple
{
"key1" : "value",
"noOHM" : true
}
And this option is needed if you want to prevent the tool to automatically start Openhardwaremonitor.
If you not needed, don't use it ... It works well
You should have do a mistake.
Check it on online json editor.
Exemple
{
"key1" : "value",
"noOHM" : true
}
And this option is needed if you want to prevent the tool to automatically start Openhardwaremonitor.
If you not needed, don't use it ... It works well
Just add noOHM : true in your config file + restart the monitorig.exe
It will auto update the tool and run it without stop/start OpenHardwareMonitor
It will auto update the tool and run it without stop/start OpenHardwareMonitor
I add
Code:
"noOHM": "true"
the tool now is update but i got that error:
Just add noOHM : true in your config file + restart the monitorig.exe
It will auto update the tool and run it without stop/start OpenHardwareMonitor
It will auto update the tool and run it without stop/start OpenHardwareMonitor
Ok, I add the option in config noOHM : true.
I'm releasing, it will be soon ready
I'm releasing, it will be soon ready
Please turn off OpenHardwareMonitor is started automatically option.
Or at least add the option to turn it off.
Man when he turns off the mining and again switches SW down more and more runs
Or at least add the option to turn it off.
Man when he turns off the mining and again switches SW down more and more runs
it would be nice to have another feature:
- show watt usage of rig
if i have the watt usage of the rig, how it could be supplied to be shown?
watt usage could be read out for eaxmple with the TP-LINK HS110 Smart Plug
whenever watt usage goes below a certain value i would like to restart the rig for example.
- show watt usage of rig
if i have the watt usage of the rig, how it could be supplied to be shown?
watt usage could be read out for eaxmple with the TP-LINK HS110 Smart Plug
whenever watt usage goes below a certain value i would like to restart the rig for example.
i have looked at something like this myself for my own rigs with my own monitoring solution
the problem is: you might use different brand models, so you have the choice of either supporting only a single brand model/range of models or write adapters for the hundreds of products available
i have looked around and found openhab (2) which does exactly this. One could integrate openhab into the monitor to query stats and execute commands, i have not done this yet as i do it in openhab itself (with rules)
i have just another feature in my mind:
- send alert not even via email but to a telegram bot
this could be done with curl for example just need to know the bot id and the chat id
of course there the bot needs to be running
so if i get a message with an alert i could send the bot command to reboot.
- send alert not even via email but to a telegram bot
this could be done with curl for example just need to know the bot id and the chat id
of course there the bot needs to be running
so if i get a message with an alert i could send the bot command to reboot.
it would be nice to have another feature:
- show watt usage of rig
if i have the watt usage of the rig, how it could be supplied to be shown?
watt usage could be read out for eaxmple with the TP-LINK HS110 Smart Plug
whenever watt usage goes below a certain value i would like to restart the rig for example.
- show watt usage of rig
if i have the watt usage of the rig, how it could be supplied to be shown?
watt usage could be read out for eaxmple with the TP-LINK HS110 Smart Plug
whenever watt usage goes below a certain value i would like to restart the rig for example.
Always the same link
Client : http://www.monitorig.com/download/monitorig-v2-beta.zip
Thanks for the ideas
Client : http://www.monitorig.com/download/monitorig-v2-beta.zip
Thanks for the ideas
where is the download link?
Freatures that you can add in future if it is possible:
- Send alert to more of one E-mail.
- Send a alert in Dashboard with a sound when a rig go offline or not send shares
- The possibility of add manual miner folder and start it with start.bat (Even if the miner is not supported)
- Transfer manually files to miners folders
- Add options "Restart all miners", "Switch all to another miner software"
Freatures that you can add in future if it is possible:
- Send alert to more of one E-mail.
- Send a alert in Dashboard with a sound when a rig go offline or not send shares
- The possibility of add manual miner folder and start it with start.bat (Even if the miner is not supported)
- Transfer manually files to miners folders
- Add options "Restart all miners", "Switch all to another miner software"
IMPORTANT UPDATE
Please, update your rigs with the last version.
MANDATORY UPDATE !
Now the tool is packaged in Monitorig.exe, and check for script update at each startup (will be plugged later on an update button in the admin panel).
OpenHardwareMonitor is started automatically.
This update is important because it will be easier for you to update the client and be sure you run the last version.
Please start from a fresh install.
PASCALCOIN support. I forked the Miner and add log option.
The miner is packaged in the bundle.
http://www.monitorig.com/#?panel=dashboard&id=1086db9224632d26671ab42df5ee1d92bf0187bbdd
PS : Upload in progress, zip available in 5min
Please, update your rigs with the last version.
MANDATORY UPDATE !
Now the tool is packaged in Monitorig.exe, and check for script update at each startup (will be plugged later on an update button in the admin panel).
OpenHardwareMonitor is started automatically.
This update is important because it will be easier for you to update the client and be sure you run the last version.
Please start from a fresh install.
PASCALCOIN support. I forked the Miner and add log option.
The miner is packaged in the bundle.
http://www.monitorig.com/#?panel=dashboard&id=1086db9224632d26671ab42df5ee1d92bf0187bbdd
PS : Upload in progress, zip available in 5min
Hi guys !
As the beta is not finished, I just add some time on this phase.
The beta will end after february.
Please feedback the tool and do some donation if you want
As the beta is not finished, I just add some time on this phase.
The beta will end after february.
Please feedback the tool and do some donation if you want
I'll try to pack a new release this evening.
Auto-update client + PascalCoin support
Auto-update client + PascalCoin support
One of the graphic (random) has a load 0'But that does not match what I see right on the rig - Claymore
It's normal, It's the value reported by OpenhardwareMonitor when the monitor is refreshed.It's possible because GPU are not always à 100%
If the GPU was at a wait state while the share is submitted, for exemple
when you will release the next update?
One of the graphic (random) has a load 0'But that does not match what I see right on the rig - Claymore
It's normal, It's the value reported by OpenhardwareMonitor when the monitor is refreshed.It's possible because GPU are not always à 100%
If the GPU was at a wait state while the share is submitted, for exemple
One of the graphic (random) has a load 0'But that does not match what I see right on the rig - Claymore
Good work, everything works, except I had to redo everything back to config and not start.bat. Now it just wants to do autoswitch for a swap of mining under nicehash
nice is this gonna be paid software as it says open beta ? nice is this gonna be paid software as it says open beta ? Jump to: