RX480 @ 750 h/s using Claymore's GPU miner out of the box.
Topic: Wolf's XMR GPU Miner - page 11. (Read 117637 times)
RX480 @ 750 h/s using Claymore's GPU miner out of the box.
Got 720 h/s on my RX 480. Not bad, thanks )
730h/s @1110c/2000m - 30h/s speedup, not sure how to do @800h/s on Win (like Wolf0 do on GNU)RX480 @ 750 h/s using Claymore's GPU miner out of the box.
Got 720 h/s on my RX 480. Not bad, thanks )
730h/s @1110c/2000m - 30h/s speedup, not sure how to do @800h/s on Win (like Wolf0 do on GNU)720 on 1150/2150
How did you get 730 on this clocks?
Got 720 h/s on my RX 480. Not bad, thanks )
730h/s @1110c/2000m - 30h/s speedup, not sure how to do @800h/s on Win (like Wolf0 do on GNU)
Got 720 h/s on my RX 480. Not bad, thanks )
Custom timings and 1250/2100 I can pull over 825H/s out of my 470 4G (Hynix.) It's done 850H/s, but not stable. Note that this is probably not because of SGMiner-GM, but because of clocks and timings, but I've not tested on Wolf-XMR-Miner in ages.
is this with stock cryptonight kernel (sg-genesis pack)?Quote
"rawintensity": "1024",
"worksize": "8",
"gpu-threads": "1"
for *.conf?"worksize": "8",
"gpu-threads": "1"
Yes, stock kernel, custom timings. Rawintensity was set to 1008.
I find 1024 too much for my 470's. 992, 1000, and 1008 are all good for me. 992 normally yields 100% accepted shares, and 1008 normally 99.2%. Can be a wash because of that. Maybe if I didnt underclock I would get some better rates.
I'll play around with sgminer-gm when I get some time and follow up with some stats.
One happy wolf-xmr-miner here, 10 years old S775 mobo with two 295x2 doing 2760H/s, 580W at the wall. Never touched volts on that dpm3 area, pretty sure they don't need 0.92v.
About 3% faster than claymore on my hawaii's.
hynix hawaii 290X pulls about 750h/s @970/1250About 3% faster than claymore on my hawaii's.
949/1250 on that same rig does 3100h/s, 1.02v, 720W at the wall.
One happy wolf-xmr-miner here, 10 years old S775 mobo with two 295x2 doing 2760H/s, 580W at the wall. Never touched volts on that dpm3 area, pretty sure they don't need 0.92v.
About 3% faster than claymore on my hawaii's.
hynix hawaii 290X pulls about 750h/s @970/1250 About 3% faster than claymore on my hawaii's.
One happy wolf-xmr-miner here, 10 years old S775 mobo with two 295x2 doing 2760H/s, 580W at the wall. Never touched volts on that dpm3 area, pretty sure they don't need 0.92v.
About 3% faster than claymore on my hawaii's.
About 3% faster than claymore on my hawaii's.
Custom timings and 1250/2100 I can pull over 825H/s out of my 470 4G (Hynix.) It's done 850H/s, but not stable. Note that this is probably not because of SGMiner-GM, but because of clocks and timings, but I've not tested on Wolf-XMR-Miner in ages.
is this with stock cryptonight kernel (sg-genesis pack)?Quote
"rawintensity": "1024",
"worksize": "8",
"gpu-threads": "1"
for *.conf? "worksize": "8",
"gpu-threads": "1"
Wolf-XMR-Miner has been superseded by SGMiner-GM.
Is there a good reason to switch besides the ability to control clock speeds on the fly? Seems to be 10x more complicated from compilation to configuration.
I'm getting 658H/s per card now on 6x MSI 470s @ 1169mhz/1880mhz/1500 strap. Only 660w at the wall. Nearly 6 Hash/Joule. Can sgminer get better Hash per watt performance on XMR?
Wolf-XMR-Miner has been superseded by SGMiner-GM.
It lags somewhat behind the Claymore XMR miner though.
Anybody run miner with command line (bat file)?
I tried next line, but nothing - miner shot down. With included xmr.conf it don't start too
start miner.exe -k cryptonight -o stratum+tcp://xmr-usa.dwarfpool.com:9050 -u user -p password -g 1 -w 8 --rawintensity 1024
I tried next line, but nothing - miner shot down. With included xmr.conf it don't start too
start miner.exe -k cryptonight -o stratum+tcp://xmr-usa.dwarfpool.com:9050 -u user -p password -g 1 -w 8 --rawintensity 1024
Do not use gpu-z, you can brick you card, use atiflash for bios backup.
gpu-z just for reading the original bios, not writing it. atiflash for writing a modded bios.
Do not use gpu-z, you can brick your card, use atiflash for bios backup.
This is me killin it on Ubuntu 16.04 w/ 6x MSI rx470 4GB
[14:31:16] Thread 3, GPU ID 3, GPU Type: Ellesmere: 635.87H/s
[14:31:16] Thread 2, GPU ID 2, GPU Type: Ellesmere: 634.97H/s
[14:31:17] Thread 5, GPU ID 5, GPU Type: Ellesmere: 641.74H/s
[14:31:18] Thread 1, GPU ID 1, GPU Type: Ellesmere: 644.15H/s
[14:31:18] Thread 4, GPU ID 4, GPU Type: Ellesmere: 641.23H/s
[14:31:18] Thread 0, GPU ID 0, GPU Type: Ellesmere: 641.01H/s
[14:31:18] Share accepted: 72/72 (100.00%)
[14:31:18] Total Hashrate: 3838.97H/s
BONUS --> Only 640w total draw at the wall... (custom bios 1160core/1900mem/1500straps)
[14:31:16] Thread 3, GPU ID 3, GPU Type: Ellesmere: 635.87H/s
[14:31:16] Thread 2, GPU ID 2, GPU Type: Ellesmere: 634.97H/s
[14:31:17] Thread 5, GPU ID 5, GPU Type: Ellesmere: 641.74H/s
[14:31:18] Thread 1, GPU ID 1, GPU Type: Ellesmere: 644.15H/s
[14:31:18] Thread 4, GPU ID 4, GPU Type: Ellesmere: 641.23H/s
[14:31:18] Thread 0, GPU ID 0, GPU Type: Ellesmere: 641.01H/s
[14:31:18] Share accepted: 72/72 (100.00%)
[14:31:18] Total Hashrate: 3838.97H/s
BONUS --> Only 640w total draw at the wall... (custom bios 1160core/1900mem/1500straps)
How are you modifying your bios? You just going into UEFI boot and changing the options? I'm new to this obviously.
Core 1160 = gpu core clock rate?
Mem = memclock rate?
What is straps?
Also, have you tried undervolting the gpu's or is it possible on ubuntu?
I have 2 unmodded sapphire rx480's running at 577H/s
"threads": 1,
"rawintensity": 1024,
"worksize": 8
Bios Mod.
- dump stock rom with gpu-z
- open in polaris, change core clocks, mem clocks, and set all straps above 1500 to the 1500 strap.
- save and write new rom to card with atiflash.
You can learn alot about it over on Zcash forms. Search Anoraks VBIOS.
I have no done any undervolting (yet). You cant do that directly in ubuntu against the amdgpu-pro drivers. You can only change core and mem clocks on the fly using the /sys/class/drm/* stuff.
I'm thinking @ 650w TDP, do I really risk stability to save a few more watts?
For MSI RX470 4G, I'm using..
{
"index": 1,
"threads": 1,
"rawintensity": 960,
"worksize": 8
}
Does anyone have numbers for RX 460 stock?
This is me killin it on Ubuntu 16.04 w/ 6x MSI rx470 4GB
[14:31:16] Thread 3, GPU ID 3, GPU Type: Ellesmere: 635.87H/s
[14:31:16] Thread 2, GPU ID 2, GPU Type: Ellesmere: 634.97H/s
[14:31:17] Thread 5, GPU ID 5, GPU Type: Ellesmere: 641.74H/s
[14:31:18] Thread 1, GPU ID 1, GPU Type: Ellesmere: 644.15H/s
[14:31:18] Thread 4, GPU ID 4, GPU Type: Ellesmere: 641.23H/s
[14:31:18] Thread 0, GPU ID 0, GPU Type: Ellesmere: 641.01H/s
[14:31:18] Share accepted: 72/72 (100.00%)
[14:31:18] Total Hashrate: 3838.97H/s
BONUS --> Only 640w total draw at the wall... (custom bios 1160core/1900mem/1500straps)
[14:31:16] Thread 3, GPU ID 3, GPU Type: Ellesmere: 635.87H/s
[14:31:16] Thread 2, GPU ID 2, GPU Type: Ellesmere: 634.97H/s
[14:31:17] Thread 5, GPU ID 5, GPU Type: Ellesmere: 641.74H/s
[14:31:18] Thread 1, GPU ID 1, GPU Type: Ellesmere: 644.15H/s
[14:31:18] Thread 4, GPU ID 4, GPU Type: Ellesmere: 641.23H/s
[14:31:18] Thread 0, GPU ID 0, GPU Type: Ellesmere: 641.01H/s
[14:31:18] Share accepted: 72/72 (100.00%)
[14:31:18] Total Hashrate: 3838.97H/s
BONUS --> Only 640w total draw at the wall... (custom bios 1160core/1900mem/1500straps)
How are you modifying your bios? You just going into UEFI boot and changing the options? I'm new to this obviously.
Core 1160 = gpu core clock rate?
Mem = memclock rate?
What is straps?
Also, have you tried undervolting the gpu's or is it possible on ubuntu?
I have 2 unmodded sapphire rx480's running at 577H/s
"threads": 1,
"rawintensity": 1024,
"worksize": 8
currently getting about 627h/s out of twin xfx 8gb 480s without modding bios on them, however i did OC my CPU/RAM. you can tinker with those settings to find optimal speed/voltage/heat ratio that works best for your hardware.
snapshot of .conf file GPU settings
{
"index": 0,
"corefreq": 1288,
"memfreq": 2000,
"fanspeed": 65,
"powertune": 20,
"threads": 1,
"rawintensity": 1022,
"worksize": 8
},
{
"index": 1,
"corefreq": 1288,
"memfreq": 2000,
"fanspeed": 65,
"powertune": 20,
"threads": 1,
"rawintensity": 1022,
"worksize": 8
},
hope this helps
Guys,
Trying to make my way into XMR mining but I'm getting the old error on my rigs:
I'm using miner version 0.4 on a rig with 6x480 4GB under Win10 x64, Crimson 16.9.2.
This is my conf file:
Any ideas?
Thanks!
Trying to make my way into XMR mining but I'm getting the old error on my rigs:
Code:
Error -1 when calling clGetDeviceIDs for number of devices
I'm using miner version 0.4 on a rig with 6x480 4GB under Win10 x64, Crimson 16.9.2.
This is my conf file:
Code:
{
"Algorithms":
[
{
"name": "CryptoNight",
"devices":
[
{
"index": 0,
"threads": 1,
"rawintensity": 640,
"worksize": 16
},
{
"index": 1,
"threads": 1,
"rawintensity": 640,
"worksize": 16
},
{
"index": 2,
"threads": 1,
"rawintensity": 640,
"worksize": 16
},
{
"index": 3,
"threads": 1,
"rawintensity": 640,
"worksize": 16
},
{
"index": 4,
"threads": 1,
"rawintensity": 640,
"worksize": 16
},
{
"index": 5,
"threads": 1,
"rawintensity": 640,
"worksize": 16
}
],
"pools":
[
{
"url": "stratum+tcp://xmr-eu.dwarfpool.com:8005",
"user": "47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB.a34e4b35838dde3cf5e68bca39ed1f64376b71eaee082407d50d4ca4d11101ef.02",
"pass": "x"
Any ideas?
Thanks!
This happened to me when i went from 1 --> 2 GPUs. My fix was to dump OS and re-install everything. If anyone knows an easier fix, please share!
This is me killin it on Ubuntu 16.04 w/ 6x MSI rx470 4GB
[14:31:16] Thread 3, GPU ID 3, GPU Type: Ellesmere: 635.87H/s
[14:31:16] Thread 2, GPU ID 2, GPU Type: Ellesmere: 634.97H/s
[14:31:17] Thread 5, GPU ID 5, GPU Type: Ellesmere: 641.74H/s
[14:31:18] Thread 1, GPU ID 1, GPU Type: Ellesmere: 644.15H/s
[14:31:18] Thread 4, GPU ID 4, GPU Type: Ellesmere: 641.23H/s
[14:31:18] Thread 0, GPU ID 0, GPU Type: Ellesmere: 641.01H/s
[14:31:18] Share accepted: 72/72 (100.00%)
[14:31:18] Total Hashrate: 3838.97H/s
BONUS --> Only 640w total draw at the wall... (custom bios 1160core/1900mem/1500straps)
[14:31:16] Thread 3, GPU ID 3, GPU Type: Ellesmere: 635.87H/s
[14:31:16] Thread 2, GPU ID 2, GPU Type: Ellesmere: 634.97H/s
[14:31:17] Thread 5, GPU ID 5, GPU Type: Ellesmere: 641.74H/s
[14:31:18] Thread 1, GPU ID 1, GPU Type: Ellesmere: 644.15H/s
[14:31:18] Thread 4, GPU ID 4, GPU Type: Ellesmere: 641.23H/s
[14:31:18] Thread 0, GPU ID 0, GPU Type: Ellesmere: 641.01H/s
[14:31:18] Share accepted: 72/72 (100.00%)
[14:31:18] Total Hashrate: 3838.97H/s
BONUS --> Only 640w total draw at the wall... (custom bios 1160core/1900mem/1500straps)
How are you modifying your bios? You just going into UEFI boot and changing the options? I'm new to this obviously.
Core 1160 = gpu core clock rate?
Mem = memclock rate?
What is straps?
Also, have you tried undervolting the gpu's or is it possible on ubuntu?
I have 2 unmodded sapphire rx480's running at 577H/s
"threads": 1,
"rawintensity": 1024,
"worksize": 8
Jump to: