[Work in progess] Burnins Avalon Chip to mining board service - page 160.

Schrankwand

full member

Activity: 224

Merit: 100

Quote from: Srbotones on May 23, 2013, 02:47:00 PM

I have a question for burning or anyone who can answer me.... (one more Undecided

)

Could the OP show us some picutres of the prototypes? Something more real than a render of the "future rig" I trust in this person but I think if he upload some pictures for us woould be a great thing, more tangible thing...

Thanks¡¡

They do not exist yet.

They will be created from scratch by the end of this month, beginning next month first as renders, then as smaller prototype boards to test the chip communication first.

Once the designs allow for chip communication to occur and the prototypes basically work, THEN you create prototypes to put 10-20 chips on. That will be end of next month probably. You will likely then get your picture.

You see, if you get a picture before people have chips (Hello, BFL), then there is a lot of probability that this is not going to be a board you are using...

Srbotones

sr. member

Activity: 391

Merit: 250

I have a question for burning or anyone who can answer me.... (one more Undecided

)

Could the OP show us some picutres of the prototypes? Something more real than a render of the "future rig" I trust in this person but I think if he upload some pictures for us woould be a great thing, more tangible thing...

Thanks¡¡

madmax_ger

sr. member

Activity: 448

Merit: 250

I love the name bitBurner... Cool

600watt

legendary

Activity: 2338

Merit: 2106

Quote from: Srbotones on May 22, 2013, 05:33:49 PM

So, I don't know if I understood very well for what I am paying for in this project.

100€ -> 20chips assembly board + Cooling fan + software, right?

So, what about the Avalon chips? I have to buy them apart of this topic? or can I buy it? I'm not really sure about this thing at all...

Expected time for shipping is mid-july... Isn't it?

English is not my native language, I'm so sorry about that Sad

I hope you can understand me.

i am sure there will be some people who have ordered avalon chips through zefirs group buy, who will have those chips assembled by burnin into miners, that would like to sell their miners right after them being made.

i have ordered 500 chips and burnin will build 25 miners out of this. i will sell some for sure. there will be plenty of those i assume.

salfter

hero member

Activity: 651

Merit: 501

My PGP Key: 92C7689C

Quote from: Min€r on May 22, 2013, 04:29:38 AM

Hahaha - Bitburner :-)

Only problem will be the logo I think as German`s "Abmahnsystem" is really a pain. Couldn`t imagine that this law would be possible in Austria (next to Germany :-) ).

I knocked it together in a couple of minutes as a joke. The blatant ripoff of an established trademark would be a Bad Thing.

Someone with more skills than I have in such matters would need to create a logo from scratch.

burnin

sr. member

Activity: 243

Merit: 250

ALTCOM Ab9upXvD7ChnJxDRZgMmwNNEf1ftCGWrsE

Quote from: Min€r on May 22, 2013, 04:29:38 AM

Only problem will be the logo I think as German`s "Abmahnsystem" is really a pain. Couldn`t imagine that this law would be possible in Austria (next to Germany :-) ).

I did not plan to use THAT as the logo for it, so I'll be fine. Wink

Quote from: excalibur on May 22, 2013, 11:20:17 AM

Hi,
thank you burnin for starting this project! Very welcome!
I will also buy chips and I will want to turn them into miners (well, seems like 99% have this plan now). Is this possible at all when you know how to use a soldering iron and you have some basic knowledge in electronics? The plans here look complicated and I have absolutely no clue how the chips will be driven in the end. Or is there any ready guide or plan which can be used by folks like me? What other equipment does one need to assemble a miner based on the avalon chips?
Best Regards from Frankfurt/Germany,
Excalibur

The board assembly can only be done by individuals with reflow-soldering capabilities.
And even to those people i wouldn't recommend manual assembly, there are over 200 0402 parts on a single board!

---------------------

To anyone sending me PN's/Mails:
Please be patient i'll try to answer them all.
I only allocate 10-20% of my time to communication, development has priority over anything else.

Srbotones

sr. member

Activity: 391

Merit: 250

Quote from: SebastianJu on May 22, 2013, 05:35:30 PM

Quote from: Srbotones on May 22, 2013, 05:33:49 PM

So, I don't know if I understood very well for what I am paying for in this project.

100€ -> 20chips assembly board + Cooling fan + software, right?

So, what about the Avalon chips? I have to buy them apart of this topic? or can I buy it? I'm not really sure about this thing at all...

Expected time for shipping is mid-july... Isn't it?

English is not my native language, I'm so sorry about that Sad

I hope you can understand me.

Burnin will have some chips himself to sell complete miners but most miner will be created out of asic chips he will get sent from customers...

Ok, thank you¡

Quote from: Grinny on May 22, 2013, 05:41:20 PM

Quote from: Srbotones on May 22, 2013, 05:33:49 PM

So, I don't know if I understood very well for what I am paying for in this project.

100€ -> 20chips assembly board + Cooling fan + software, right?

So, what about the Avalon chips? I have to buy them apart of this topic? or can I buy it? I'm not really sure about this thing at all...

Expected time for shipping is mid-july... Isn't it?

English is not my native language, I'm so sorry about that Sad

I hope you can understand me.

No need to apologize, Srbotones

Yes, you must buy the Avalon chips by yourself and send them to burnin.
There are several Groupbuys for chips in this Forum - just take a look and choose one, where the buyer is located near you or will ship to you.

All clear¡¡

Thank you a lot guys

Grinny

sr. member

Activity: 390

Merit: 250

Quote from: Srbotones on May 22, 2013, 05:33:49 PM

So, I don't know if I understood very well for what I am paying for in this project.

100€ -> 20chips assembly board + Cooling fan + software, right?

So, what about the Avalon chips? I have to buy them apart of this topic? or can I buy it? I'm not really sure about this thing at all...

Expected time for shipping is mid-july... Isn't it?

English is not my native language, I'm so sorry about that Sad

I hope you can understand me.

No need to apologize, Srbotones

Yes, you must buy the Avalon chips by yourself and send them to burnin.
There are several Groupbuys for chips in this Forum - just take a look and choose one, where the buyer is located near you or will ship to you.

SebastianJu

legendary

Activity: 2674

Merit: 1083

Legendary Escrow Service - Tip Jar in Profile

Quote from: Srbotones on May 22, 2013, 05:33:49 PM

So, I don't know if I understood very well for what I am paying for in this project.

100€ -> 20chips assembly board + Cooling fan + software, right?

So, what about the Avalon chips? I have to buy them apart of this topic? or can I buy it? I'm not really sure about this thing at all...

Expected time for shipping is mid-july... Isn't it?

English is not my native language, I'm so sorry about that Sad

I hope you can understand me.

Burnin will have some chips himself to sell complete miners but most miner will be created out of asic chips he will get sent from customers...

Srbotones

sr. member

Activity: 391

Merit: 250

So, I don't know if I understood very well for what I am paying for in this project.

100€ -> 20chips assembly board + Cooling fan + software, right?

So, what about the Avalon chips? I have to buy them apart of this topic? or can I buy it? I'm not really sure about this thing at all...

Expected time for shipping is mid-july... Isn't it?

English is not my native language, I'm so sorry about that Sad

I hope you can understand me.

FullFathom5

newbie

Activity: 31

Merit: 0

Quote from: Sophokles on May 22, 2013, 11:32:22 AM

Quote from: FullFathom5 on May 22, 2013, 10:57:15 AM

Quote from: burnin on May 20, 2013, 08:50:13 PM

But more importandly as the opening of the website draws closer i created an email newsletter
to alert you people when there are important Project Updates.
Register here:
http://eepurl.com/zNH7v

Attempted to sign up for this list but did not work for me. Is this list still up & active?

Worked for me, just now...

Hah! Worked for me twice apparently, but each time the web page gave error that the list had "disappeared".

All good. Thanks for feedback.

Sophokles

hero member

Activity: 1232

Merit: 516

Quote from: FullFathom5 on May 22, 2013, 10:57:15 AM

Quote from: burnin on May 20, 2013, 08:50:13 PM

But more importandly as the opening of the website draws closer i created an email newsletter
to alert you people when there are important Project Updates.
Register here:
http://eepurl.com/zNH7v

Attempted to sign up for this list but did not work for me. Is this list still up & active?

Worked for me, just now...

excalibur

newbie

Activity: 35

Merit: 0

Hi,
thank you burnin for starting this project! Very welcome!
I will also buy chips and I will want to turn them into miners (well, seems like 99% have this plan now). Is this possible at all when you know how to use a soldering iron and you have some basic knowledge in electronics? The plans here look complicated and I have absolutely no clue how the chips will be driven in the end. Or is there any ready guide or plan which can be used by folks like me? What other equipment does one need to assemble a miner based on the avalon chips?
Best Regards from Frankfurt/Germany,
Excalibur

FullFathom5

newbie

Activity: 31

Merit: 0

Quote from: burnin on May 20, 2013, 08:50:13 PM

But more importandly as the opening of the website draws closer i created an email newsletter
to alert you people when there are important Project Updates.
Register here:
http://eepurl.com/zNH7v

Attempted to sign up for this list but did not work for me. Is this list still up & active?

ummas

sr. member

Activity: 274

Merit: 250

Bitburner rox!!
I wont lots of them :-)

krasnolud

member

Activity: 109

Merit: 10

Quote from: krasnolud on May 21, 2013, 08:01:35 AM

Bitburner

I'm glad you like my idea (especially Burnin himself).

And I appreciate your suggestion to thank me with the highest priority when assembling my miners. Wink

bitcoiner49er

sr. member

Activity: 457

Merit: 250

BITburner sind ganz toll! Grin

Min€r

sr. member

Activity: 359

Merit: 250

Hahaha - Bitburner :-)

Only problem will be the logo I think as German`s "Abmahnsystem" is really a pain. Couldn`t imagine that this law would be possible in Austria (next to Germany :-) ).

@burnin - Wenn Du irgendwelche Sticker (Eco-Solvent bis 1600mm inkl. Weiß & Metallicfarben), Folder (A4), Anleitungen oder Broschüren (A4 & A5) gedruckt brauchst für dein Projekt - melde dich bei mir. Eventuell könnte man ja schon gewisse benötigte Drucke vorweg fertigen um nachher Zeit zu sparen. Falls Du schon was hast zum Drucken - schick einfach mal rüber in pdf (sende Dir gerne Muster zu).

Bicknellski

hero member

Activity: 924

Merit: 1000

arklan

legendary

Activity: 1778

Merit: 1008

i am a fan of this.

Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 160. (Read 624197 times)