[Work in progess] Burnins Avalon Chip to mining board service - page 162.

Bicknellski

hero member

Activity: 924

Merit: 1000

Quote from: burnin on May 20, 2013, 05:18:18 PM

Full view:

Cheesy Name:

CAN, USB, POWER (left to right):

As the name is kinda cheesy, any suggestions?

Decurion X for the 10 board.

Decurio literally means "leader of 10 men"

Decurion XX for the 20 board.

or simply X and XX

Can't wait to see your Triple X board.... Tongue

arklan

legendary

Activity: 1778

Merit: 1008

Quote from: krasnolud on May 21, 2013, 02:29:36 AM

Quote from: testsieger on May 20, 2013, 02:55:20 PM

I am the guy who visited "burnin" and checked that he is a real person.

I personally trust burnin just like that - but it's a bit funny to me that the person that "checked" him is a junior member with 16 posts.
I was expecting some old hand.

Who will now "check" testsieger? Wink

buy me a flight to germany and i'll check anybody ya like. Cheesy

(i'm in the US. heh.)

krasnolud

member

Activity: 109

Merit: 10

Quote from: testsieger on May 20, 2013, 02:55:20 PM

I am the guy who visited "burnin" and checked that he is a real person.

I personally trust burnin just like that - but it's a bit funny to me that the person that "checked" him is a junior member with 16 posts.
I was expecting some old hand.

Who will now "check" testsieger? Wink

warhawk187

sr. member

Activity: 327

Merit: 250

I will check on this once the PCBs are done. I have an order with zefir for 200 chips so I would be interested in 10 x 20 chip modules. Any way there would be a discount on 10? Or just a custom 5x 40/4 x 50/2x 100/1 x 200 custom board order? My priority would be deliver time of course so if that would take too long I would rather go with your 20 chip modules. Looks good so far I do have to say.

iikun

legendary

Activity: 1062

Merit: 1003

Quote from: burnin on May 20, 2013, 08:50:13 PM

Quote from: wrenchmonkey on May 20, 2013, 08:47:31 PM

Quote from: zif33rs on May 20, 2013, 05:26:06 PM

Almost good....maybe Combuster? Coinbuster? Tongue

....hmmm..should trademark that...not bad...

C-c-c-combo breaker!

Mhh Coinbreaker? Coincombustor?
Great names Cheesy

Coincombustor +1 (works well with "Burnin")

burnin

sr. member

Activity: 243

Merit: 250

ALTCOM Ab9upXvD7ChnJxDRZgMmwNNEf1ftCGWrsE

Quote from: wrenchmonkey on May 20, 2013, 08:47:31 PM

Quote from: zif33rs on May 20, 2013, 05:26:06 PM

Almost good....maybe Combuster? Coinbuster? Tongue

....hmmm..should trademark that...not bad...

C-c-c-combo breaker!

Mhh Coinbreaker? Coincombustor?
Great names Cheesy

But more importandly as the opening of the website draws closer i created an email newsletter
to alert you people when there are important Project Updates.
Register here:
http://eepurl.com/zNH7v

Quote from: dexX7 on May 20, 2013, 08:47:51 PM

Everything sounds so great, I'm very happy!

I have a question about the order website. How are incoming orders queued? First in, first out? Public announcement before the start opening?
Do you plan to assemble the boards when the chips arrive or do you make them almost-complete, so the time between chip arrival and shipping is reduced?

Assembly will start when i receive the chips.
There were already lengthy discussions about the order queue.
In short: FIFO+Which batch your chips are in.

dexX7

legendary

Activity: 1106

Merit: 1026

Everything sounds so great, I'm very happy!

I have a question about the order website. How are incoming orders queued? First in, first out? Public announcement before the start opening?

Do you plan to assemble the boards when the chips arrive or do you make them almost-complete, so the time between chip arrival and shipping is reduced?

Anyway, great project!

wrenchmonkey

full member

Activity: 224

Merit: 100

Quote from: zif33rs on May 20, 2013, 05:26:06 PM

Almost good....maybe Combuster? Coinbuster? Tongue

....hmmm..should trademark that...not bad...

C-c-c-combo breaker!

iikun

legendary

Activity: 1062

Merit: 1003

Quote from: Schrankwand on May 20, 2013, 05:50:02 PM

Quote from: Kickingpanda on May 20, 2013, 05:46:25 PM

Quote from: pedromtorres on May 20, 2013, 05:43:14 PM

Quote from: Kickingpanda on May 20, 2013, 05:40:00 PM

Quote from: testsieger on May 20, 2013, 02:55:20 PM

I have following proofs now: (have them as pics which I took during the visit) the hard facts

1) german passport, with ID number, picture
2) Meldunsgbestätigung Einwohnermeldeamt. (certification of registartion of city Hamburg)
3) formation of a company documents from notary public and adress. This information will show up in a couple of days also in the Handelsregister(Company Registry) in Hamburg. The clients will order directly from this company the boards.

So, can we please see 1, 2 and 3?
This is why you took the pics, right?

I know you would want to see them, but i don't think its safe to post personal information as passaports, id, etc here for everyone to steal.
You don't want your friend to go to jail because some drug dealer copied his passport :p

Of course, I mean the appropriately redacted versions...

To make sure this works with a german passport, you will have to redact everything other than the name...

I would wait a few days and then in fact let someone get a copy of the Handelsregister. Everything important is in there. And it won't create any problems for burnin. That is actually what most companies do when they do B2B over here.

I agree with Schrankwand. If you don't have enough confidence in Burnin then there's really no compulsion to order. I do/will though

If you want clearly documented proof of who people are before you buy then I suggest you order from BFL, then just wait 2 ~~weeks~~ years for delivery Cheesy

Schrankwand

full member

Activity: 224

Merit: 100

Quote from: Kickingpanda on May 20, 2013, 05:46:25 PM

Quote from: pedromtorres on May 20, 2013, 05:43:14 PM

Quote from: Kickingpanda on May 20, 2013, 05:40:00 PM

Quote from: testsieger on May 20, 2013, 02:55:20 PM

I have following proofs now: (have them as pics which I took during the visit) the hard facts

1) german passport, with ID number, picture
2) Meldunsgbestätigung Einwohnermeldeamt. (certification of registartion of city Hamburg)
3) formation of a company documents from notary public and adress. This information will show up in a couple of days also in the Handelsregister(Company Registry) in Hamburg. The clients will order directly from this company the boards.

So, can we please see 1, 2 and 3?
This is why you took the pics, right?

I know you would want to see them, but i don't think its safe to post personal information as passaports, id, etc here for everyone to steal.
You don't want your friend to go to jail because some drug dealer copied his passport :p

Of course, I mean the appropriately redacted versions...

To make sure this works with a german passport, you will have to redact everything other than the name...

I would wait a few days and then in fact let someone get a copy of the Handelsregister. Everything important is in there. And it won't create any problems for burnin. That is actually what most companies do when they do B2B over here.

Kickingpanda

newbie

Activity: 16

Merit: 0

Quote from: pedromtorres on May 20, 2013, 05:43:14 PM

Quote from: Kickingpanda on May 20, 2013, 05:40:00 PM

Quote from: testsieger on May 20, 2013, 02:55:20 PM

I have following proofs now: (have them as pics which I took during the visit) the hard facts

1) german passport, with ID number, picture
2) Meldunsgbestätigung Einwohnermeldeamt. (certification of registartion of city Hamburg)
3) formation of a company documents from notary public and adress. This information will show up in a couple of days also in the Handelsregister(Company Registry) in Hamburg. The clients will order directly from this company the boards.

So, can we please see 1, 2 and 3?
This is why you took the pics, right?

I know you would want to see them, but i don't think its safe to post personal information as passaports, id, etc here for everyone to steal.
You don't want your friend to go to jail because some drug dealer copied his passport :p

Of course, I mean the appropriately redacted versions...

pedromtorres

newbie

Activity: 13

Merit: 0

Quote from: Kickingpanda on May 20, 2013, 05:40:00 PM

Quote from: testsieger on May 20, 2013, 02:55:20 PM

I have following proofs now: (have them as pics which I took during the visit) the hard facts

1) german passport, with ID number, picture
2) Meldunsgbestätigung Einwohnermeldeamt. (certification of registartion of city Hamburg)
3) formation of a company documents from notary public and adress. This information will show up in a couple of days also in the Handelsregister(Company Registry) in Hamburg. The clients will order directly from this company the boards.

So, can we please see 1, 2 and 3?
This is why you took the pics, right?

I know you would want to see them, but i don't think its safe to post personal information as passaports, id, etc here for everyone to steal.
You don't want your friend to go to jail because some drug dealer copied his passport :p

Kickingpanda

newbie

Activity: 16

Merit: 0

Quote from: testsieger on May 20, 2013, 02:55:20 PM

I have following proofs now: (have them as pics which I took during the visit) the hard facts

1) german passport, with ID number, picture
2) Meldunsgbestätigung Einwohnermeldeamt. (certification of registartion of city Hamburg)
3) formation of a company documents from notary public and adress. This information will show up in a couple of days also in the Handelsregister(Company Registry) in Hamburg. The clients will order directly from this company the boards.

So, can we please see 1, 2 and 3?
This is why you took the pics, right?

Toolhead

full member

Activity: 178

Merit: 101

Hashinator Roll Eyes

tigerbit

member

Activity: 80

Merit: 10

The "BitBanger"

zif33rs

full member

Activity: 196

Merit: 100

Almost good....maybe Combuster? Coinbuster? Tongue

....hmmm..should trademark that...not bad...

pitchbend

sr. member

Activity: 242

Merit: 250

Umm the renders look nice.

Name suggestion: SHArp board

BTW Burnin do you have an estimate of when will the ordering webpage be online?

Toolhead

full member

Activity: 178

Merit: 101

oh my god! Shocked

perfect!

Knecke

full member

Activity: 140

Merit: 100

I would like to build it myself, do you make everything opensource, PCB, BOM sourcode etc.?

burnin

sr. member

Activity: 243

Merit: 250

ALTCOM Ab9upXvD7ChnJxDRZgMmwNNEf1ftCGWrsE

Quote from: testsieger on May 20, 2013, 02:55:20 PM

I trust him and he is able to do it!

best regards

testsieger

Thank you for you kind words.

Quote from: testsieger on May 20, 2013, 02:55:20 PM

In Heaven…
the mechanics are German ok!
the cooks are French
the police are British
the lovers are Italian
and everything is organized by the Swiss. ok!

In Hell…
the mechanics are French
the police are German
the cooks are British
the lovers are Swiss
and everything is organized by the Italians.

And as promised more board renders:
Now with 6 4mm mounting holes.

Full view:

Cheesy Name:

CAN, USB, POWER (left to right):

As the name is kinda cheesy, any suggestions?

Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 162. (Read 624197 times)