Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 179. (Read 624205 times)
Just stating numbers. Please correct me if I'm wrong.
10 chips = 1 module = 80 EURO
20 chips = 2 modules = 160 EURO
30 chips = 3 modules = 240 EURO
100 chips = 10 modules = 800 EURO
1,000 chips = 100 modules = 8,000 EURO
10,000 chips = 1,000 modules = 80,000 EURO
30,000 chips = 3,000 modules = 160,000 EURO
We've had 3 batchs of 10k chips orders via Zefir to date.
20 chips = 2 modules = 160 EURO
30 chips = 3 modules = 240 EURO
100 chips = 10 modules = 800 EURO
1,000 chips = 100 modules = 8,000 EURO
10,000 chips = 1,000 modules = 80,000 EURO
30,000 chips = 3,000 modules = 160,000 EURO
We've had 3 batchs of 10k chips orders via Zefir to date.
So ?
10 chips = 1 module = 80 EURO
20 chips = 2 modules = 160 EURO
30 chips = 3 modules = 240 EURO
100 chips = 10 modules = 800 EURO
1,000 chips = 100 modules = 8,000 EURO
10,000 chips = 1,000 modules = 80,000 EURO
30,000 chips = 3,000 modules = 160,000 EURO
We've had 3 batchs of 10k chips orders via Zefir to date.
20 chips = 2 modules = 160 EURO
30 chips = 3 modules = 240 EURO
100 chips = 10 modules = 800 EURO
1,000 chips = 100 modules = 8,000 EURO
10,000 chips = 1,000 modules = 80,000 EURO
30,000 chips = 3,000 modules = 160,000 EURO
We've had 3 batchs of 10k chips orders via Zefir to date.
So let me see if I understand, 1 Module == 10 chips, right? 1 module = ~2.8GH/s and will cost 80 euro to assemble?
That's what the OP is saying, yes.
*May cost 80 euro: cost is unconfirmed.
So let me see if I understand, 1 Module == 10 chips, right? 1 module = ~2.8GH/s and will cost 80 euro to assemble?
That's what the OP is saying, yes.
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
So let me see if I understand, 1 Module == 10 chips, right? 1 module = ~2.8GH/s and will cost 80 euro to assemble?
Because Martin is IRL at the moment,
I'll do some Support
1.
yes we need a higher density solution, I'm looking at this design as well
He wrote to me, that if there exists a demand of bigger board with more chips on it, he would maybe offer them.
But at the moment that is all up in the air.
2.
The 80Eur is already calculated estimate, but since there is a degree of uncertainty involved with not having the data on the Chips i can't commit to it yet.
I will be away over this weekend, so don't expect anything from me.
OP Updated with email address.
I'll do my very best!
I'm in for 4 boards. I will send and email to you with my private key signed message when I transfer funds to the group buy escrow. Please let me know if it is ok to personaly pick up boards when finished as I should not be such a long drive and I'm in D often anyway. Thanks!
Yes, there will be the opportunity to personally pick up the board(s).
With kind regards,
Jan (alias newfrozzen)
EDIT:
PS:
Burnin is based in Germany -> HAMBURG
I'll do some Support
1.
Is it possible to make custom design? for those who ordered hundred chips, and do not want tons of boards with 10 chips on each
yes we need a higher density solution, I'm looking at this design as well
He wrote to me, that if there exists a demand of bigger board with more chips on it, he would maybe offer them.
But at the moment that is all up in the air.
2.
I think OP said that he will allow orders once he has all the info he needs and he knows exactly the price.
The 80Eur is already calculated estimate, but since there is a degree of uncertainty involved with not having the data on the Chips i can't commit to it yet.
I will be away over this weekend, so don't expect anything from me.
OP Updated with email address.
I'm excited about this project and have fingers crossed to receive these modules before my birthday at the end of July.
I'll do my very best!
I'm in for 4 boards. I will send and email to you with my private key signed message when I transfer funds to the group buy escrow. Please let me know if it is ok to personaly pick up boards when finished as I should not be such a long drive and I'm in D often anyway. Thanks!
With kind regards,
Jan (alias newfrozzen)
EDIT:
PS:
Burnin is based in Germany -> HAMBURG
Hi!
I would come by and pick some up, however how fast can we build these? That really decides how much I would sink into the project. If it takes until august, I say: F that, i take two. If you get them ready for me me end of June beginning of July, I start collecting money from family and friends
Bevor er die Chips hat wird da nicht viel passieren , mitte Juli hat er darum mal angepeilt.
Because Martin is IRL at the moment,
I'll do some Support
1.
yes we need a higher density solution, I'm looking at this design as well
He wrote to me, that if there exists a demand of bigger board with more chips on it, he would maybe offer them.
But at the moment that is all up in the air.
2.
The 80Eur is already calculated estimate, but since there is a degree of uncertainty involved with not having the data on the Chips i can't commit to it yet.
I will be away over this weekend, so don't expect anything from me.
OP Updated with email address.
I'll do my very best!
I'm in for 4 boards. I will send and email to you with my private key signed message when I transfer funds to the group buy escrow. Please let me know if it is ok to personaly pick up boards when finished as I should not be such a long drive and I'm in D often anyway. Thanks!
Yes, there will be the opportunity to personally pick up the board(s).
With kind regards,
Jan (alias newfrozzen)
EDIT:
PS:
Burnin is based in Germany -> HAMBURG
I'll do some Support
1.
Is it possible to make custom design? for those who ordered hundred chips, and do not want tons of boards with 10 chips on each
yes we need a higher density solution, I'm looking at this design as well
He wrote to me, that if there exists a demand of bigger board with more chips on it, he would maybe offer them.
But at the moment that is all up in the air.
2.
I think OP said that he will allow orders once he has all the info he needs and he knows exactly the price.
The 80Eur is already calculated estimate, but since there is a degree of uncertainty involved with not having the data on the Chips i can't commit to it yet.
I will be away over this weekend, so don't expect anything from me.
OP Updated with email address.
I'm excited about this project and have fingers crossed to receive these modules before my birthday at the end of July.
I'll do my very best!
I'm in for 4 boards. I will send and email to you with my private key signed message when I transfer funds to the group buy escrow. Please let me know if it is ok to personaly pick up boards when finished as I should not be such a long drive and I'm in D often anyway. Thanks!
With kind regards,
Jan (alias newfrozzen)
EDIT:
PS:
Burnin is based in Germany -> HAMBURG
Hi!
I would come by and pick some up, however how fast can we build these? That really decides how much I would sink into the project. If it takes until august, I say: F that, i take two. If you get them ready for me me end of June beginning of July, I start collecting money from family and friends
looking forward to this and hopefully it's not that long of a drive =)
did't realise it is in hamburg. oh well, i'll stop by just to see how you're doing. and to enjoy driving with no speed limits.....
looking forward to this and hopefully it's not that long of a drive =)
Because Martin is IRL at the moment,
I'll do some Support
1.
yes we need a higher density solution, I'm looking at this design as well
He wrote to me, that if there exists a demand of bigger board with more chips on it, he would maybe offer them.
But at the moment that is all up in the air.
2.
The 80Eur is already calculated estimate, but since there is a degree of uncertainty involved with not having the data on the Chips i can't commit to it yet.
I will be away over this weekend, so don't expect anything from me.
OP Updated with email address.
I'll do my very best!
I'm in for 4 boards. I will send and email to you with my private key signed message when I transfer funds to the group buy escrow. Please let me know if it is ok to personaly pick up boards when finished as I should not be such a long drive and I'm in D often anyway. Thanks!
Yes, there will be the opportunity to personally pick up the board(s).
With kind regards,
Jan (alias newfrozzen)
EDIT:
PS:
Burnin is based in Germany -> HAMBURG
I'll do some Support
1.
Is it possible to make custom design? for those who ordered hundred chips, and do not want tons of boards with 10 chips on each
yes we need a higher density solution, I'm looking at this design as well
He wrote to me, that if there exists a demand of bigger board with more chips on it, he would maybe offer them.
But at the moment that is all up in the air.
2.
I think OP said that he will allow orders once he has all the info he needs and he knows exactly the price.
The 80Eur is already calculated estimate, but since there is a degree of uncertainty involved with not having the data on the Chips i can't commit to it yet.
I will be away over this weekend, so don't expect anything from me.
OP Updated with email address.
I'm excited about this project and have fingers crossed to receive these modules before my birthday at the end of July.
I'll do my very best!
I'm in for 4 boards. I will send and email to you with my private key signed message when I transfer funds to the group buy escrow. Please let me know if it is ok to personaly pick up boards when finished as I should not be such a long drive and I'm in D often anyway. Thanks!
With kind regards,
Jan (alias newfrozzen)
EDIT:
PS:
Burnin is based in Germany -> HAMBURG
He is IRL ATM guys.
Is it possible to make custom design? for those who ordered hundred chips, and do not want tons of boards with 10 chips on each
yes we need a higher density solution, I'm looking at this design as well
Are you sure you know what you're doing? As in, if we choose option 1, are we going to be able to just plug it in and start mining?
I ordered chips from zefir yesterday, batch 3, could I still let them be shipped to you or do I have to cancel my order and order from you?
I think OP said that he will allow orders once he has all the info he needs and he knows exactly the price.
The 80Eur is already calculated estimate, but since there is a degree of uncertainty involved with not having the data on the Chips i can't commit to it yet.
I will be away over this weekend, so don't expect anything from me.
OP Updated with email address.
I'm excited about this project and have fingers crossed to receive these modules before my birthday at the end of July.
I'll do my very best!
I'm in for 4 boards. I will send and email to you with my private key signed message when I transfer funds to the group buy escrow. Please let me know if it is ok to personaly pick up boards when finished as I should not be such a long drive and I'm in D often anyway. Thanks!
Is it possible to make custom design? for those who ordered hundred chips, and do not want tons of boards with 10 chips on each
+1 That would be great.
Is it possible to make custom design? for those who ordered hundred chips, and do not want tons of boards with 10 chips on each
Any idea how many layers the board may be?
I'm interesting in producing boards based on the design and selling finished miners into the US market.
I'm interesting in producing boards based on the design and selling finished miners into the US market.
What does it say in the opening post?
4 layer.
I'll order assembly of 32 modules as soon as it opens!
Jump to: