[Work in progess] Burnins Avalon Chip to mining board service - page 32.

Micky25

legendary

Activity: 974

Merit: 1000

Quote from: SebastianJu on September 22, 2013, 10:47:51 AM

I have a problem i dont find the reason for. I mine at bitparking.com and it worked fine for weeks. But the last days it happens that after some time of mining normally the hashrate breaks. Its running at 50% then or even at 25%. The temperature is lower then too. And the status says idled miner...

When i restart cgminer then it runs normally again for a while. So i doubt its the pools fault.

I tried different scan time settings and different queue but i dont see that there is an effect. I restarted rpi too.

What can the problem be? I dont find it. I mean i ran them without problems before.

I had a similar phenomenon with my bitfurys on slushs, since I restart the stratum-proxy every hour everything is ok. In your case I suppose it would mean a restart of the miner (including probable loss of the current workload).

g83

sr. member

Activity: 448

Merit: 250

Super Smash Bros. Ultimate Available Now!

Anyone received a refund from burnin yet Huh

SebastianJu

legendary

Activity: 2674

Merit: 1083

Legendary Escrow Service - Tip Jar in Profile

I have a problem i dont find the reason for. I mine at bitparking.com and it worked fine for weeks. But the last days it happens that after some time of mining normally the hashrate breaks. Its running at 50% then or even at 25%. The temperature is lower then too. And the status says idled miner...

When i restart cgminer then it runs normally again for a while. So i doubt its the pools fault.

I tried different scan time settings and different queue but i dont see that there is an effect. I restarted rpi too.

What can the problem be? I dont find it. I mean i ran them without problems before.

Newar

legendary

Activity: 1358

Merit: 1001

https://gliph.me/hUF

Quote from: kong2029 on September 22, 2013, 03:10:06 AM

Newar, thanks that worked perfectly. Only problem is that it says refunds processed in mid-October. Was that the same for you?

Well, I kept my order.

It was mentioned by burnin that refunds will be mid October to give him some breathing space.

Quote

busy

etc.

kong2029

newbie

Activity: 59

Merit: 0

Quote from: Newar on September 21, 2013, 10:54:21 AM

Quote from: kong2029 on September 21, 2013, 09:23:43 AM

Quote from: RoadStress on September 21, 2013, 04:40:24 AM

Quote from: kong2029 on September 20, 2013, 09:05:46 PM

Burnin,

Over a week ago I sent a PM to you asking for a refund for my order. After receiving no reply I sent a message through your website again asking for confirmation of the refund and amounts.

I haven't received a reply to that email either. Can you please confirm my refund is being processed or reply to 1 of my messages?

Regards,

kong2029

Have you been reading this thread completely? You can request a refund on cryptx's new website.

I thought CryptX is only handling bitfury related orders. Is he handling bitburner XX refunds as well?

Any info would be appreciated. Thanks.

kong2029

You should be able to login at asic-hardware.com with the same credentials as on burninmining. Your orders will be listed and there's the options buttons on the right. That's how it worked for me anyway.

Newar, thanks that worked perfectly. Only problem is that it says refunds processed in mid-October. Was that the same for you?

Newar

legendary

Activity: 1358

Merit: 1001

https://gliph.me/hUF

Quote from: mastahofdesastah on September 21, 2013, 12:06:47 PM

maybe you have to look in your Account or wait till Burnin put in the tracking Code.

No kidding.
If this device had an F5 key it'd be worn out by now. ;-)

Quote from: mastahofdesastah on September 21, 2013, 12:06:47 PM

He's busy, and it doing the (im)possible.

[rant]
I know he is busy. That is the one thing we know from the last pages in this thread. I'll also say this order I'm waiting for is not the regular "group buy in - boards out" and I have made a mistake too. Closing the shop and transferring orders added to it as well. As such I'm not the easiest customer he has, I'm sure.

I dare not to think what would have happened if all the batches would have actually been delivered.
[/rant]

Phew...

mastahofdesastah

full member

Activity: 163

Merit: 100

Got a mail from burningmining, that my order is complete and the trackingcode was included.

maybe you have to look in your Account or wait till Burnin put in the tracking Code. He's busy, and it doing the (im)possible.

Quote from: Newar on September 21, 2013, 05:43:21 AM

Quote from: mastahofdesastah on September 21, 2013, 05:11:19 AM

Thx to burnin, got shipping code.
My BB arrives Monday

Ah, this is how it works?

Could I get mine too, please?

Newar

legendary

Activity: 1358

Merit: 1001

https://gliph.me/hUF

Quote from: kong2029 on September 21, 2013, 09:23:43 AM

Quote from: RoadStress on September 21, 2013, 04:40:24 AM

Quote from: kong2029 on September 20, 2013, 09:05:46 PM

Burnin,

Over a week ago I sent a PM to you asking for a refund for my order. After receiving no reply I sent a message through your website again asking for confirmation of the refund and amounts.

I haven't received a reply to that email either. Can you please confirm my refund is being processed or reply to 1 of my messages?

Regards,

kong2029

Have you been reading this thread completely? You can request a refund on cryptx's new website.

I thought CryptX is only handling bitfury related orders. Is he handling bitburner XX refunds as well?

Any info would be appreciated. Thanks.

kong2029

You should be able to login at asic-hardware.com with the same credentials as on burninmining. Your orders will be listed and there's the options buttons on the right. That's how it worked for me anyway.

kong2029

newbie

Activity: 59

Merit: 0

Quote from: RoadStress on September 21, 2013, 04:40:24 AM

Quote from: kong2029 on September 20, 2013, 09:05:46 PM

Burnin,

Over a week ago I sent a PM to you asking for a refund for my order. After receiving no reply I sent a message through your website again asking for confirmation of the refund and amounts.

I haven't received a reply to that email either. Can you please confirm my refund is being processed or reply to 1 of my messages?

Regards,

kong2029

Have you been reading this thread completely? You can request a refund on cryptx's new website.

I thought CryptX is only handling bitfury related orders. Is he handling bitburner XX refunds as well?

Any info would be appreciated. Thanks.

kong2029

eraziel

full member

Activity: 154

Merit: 100

Quote from: SebastianJu on September 21, 2013, 08:41:33 AM

Quote from: eraziel on September 21, 2013, 08:31:35 AM

1.5V WTF ?!

Its probably only not working with bitburners because the 4 more chips draw power the power supply cant provide. So it begins to start hashing lower. At least i now know that im nearly at the max for my bitburner.

The reason for the "WTF" is the fact that the chips were to be run at 1.2V and are still ok running at 1.5V. I'm just surprised that they're still alive with such excessive overvolting.
Not talking about the capacity of the voltage regulators.

SebastianJu

legendary

Activity: 2674

Merit: 1083

Legendary Escrow Service - Tip Jar in Profile

Quote from: eraziel on September 21, 2013, 08:31:35 AM

1.5V WTF ?!

Its probably only not working with bitburners because the 4 more chips draw power the power supply cant provide. So it begins to start hashing lower. At least i now know that im nearly at the max for my bitburner.

eraziel

full member

Activity: 154

Merit: 100

1.5V WTF ?!

SebastianJu

legendary

Activity: 2674

Merit: 1083

Legendary Escrow Service - Tip Jar in Profile

@burnin... maybe you can push the bitfurys to higher clockrates too since marto got his 16chip board stable to run at 500mhz. Someone said its because the power supply is the same for both boards so that 16 chips can get more wattage than 20 chips. Maybe its worth testing this out to find out the real hashrate of bitfurys too.

Quote from: marto74 on September 19, 2013, 11:37:26 PM

Hot news
First pieces from our last edition ( production run) with updgraded air cooling
works even @ 500 Mhz - 7.7/8 Ghs

Newar

legendary

Activity: 1358

Merit: 1001

https://gliph.me/hUF

Quote from: mastahofdesastah on September 21, 2013, 05:11:19 AM

Thx to burnin, got shipping code.
My BB arrives Monday

Ah, this is how it works?

Could I get mine too, please?

mastahofdesastah

full member

Activity: 163

Merit: 100

Thx to burnin, got shipping code.
My BB arrives Monday

Quote from: Newar on September 21, 2013, 02:59:27 AM

Quote from: julz on September 21, 2013, 12:04:32 AM

Quote from: Newar on September 20, 2013, 06:38:40 AM

Quote from: mastahofdesastah on September 20, 2013, 06:33:19 AM

Still waiting for Zefir batch 2 boards... Cry

Maybe SebastianJu's batch Shops before?

Thank you for reading the thread. Roll Eyes

Burnin said batch 2 is shipped.

I have a batch 2 order - but the order status on burninmining.com says 'processing'. Does anyone else have a different status?
Is he actually updating info on that site any more?
I've received no email updates regarding the order.

He also said he is too busy to update the site with tracking orders. https://bitcointalksearch.org/topic/m.3193107

I guess we have to wait for the post man to ring.

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: kong2029 on September 20, 2013, 09:05:46 PM

Burnin,

Over a week ago I sent a PM to you asking for a refund for my order. After receiving no reply I sent a message through your website again asking for confirmation of the refund and amounts.

I haven't received a reply to that email either. Can you please confirm my refund is being processed or reply to 1 of my messages?

Regards,

kong2029

Have you been reading this thread completely? You can request a refund on cryptx's new website.

Newar

legendary

Activity: 1358

Merit: 1001

https://gliph.me/hUF

Quote from: julz on September 21, 2013, 12:04:32 AM

Quote from: Newar on September 20, 2013, 06:38:40 AM

Quote from: mastahofdesastah on September 20, 2013, 06:33:19 AM

Still waiting for Zefir batch 2 boards... Cry

Maybe SebastianJu's batch Shops before?

Thank you for reading the thread. Roll Eyes

Burnin said batch 2 is shipped.

I have a batch 2 order - but the order status on burninmining.com says 'processing'. Does anyone else have a different status?
Is he actually updating info on that site any more?
I've received no email updates regarding the order.

He also said he is too busy to update the site with tracking orders. https://bitcointalksearch.org/topic/m.3193107

I guess we have to wait for the post man to ring.

julz

legendary

Activity: 1092

Merit: 1001

Quote from: Newar on September 20, 2013, 06:38:40 AM

Quote from: mastahofdesastah on September 20, 2013, 06:33:19 AM

Still waiting for Zefir batch 2 boards... Cry

Maybe SebastianJu's batch Shops before?

Thank you for reading the thread. Roll Eyes

Burnin said batch 2 is shipped.

I have a batch 2 order - but the order status on burninmining.com says 'processing'. Does anyone else have a different status?
Is he actually updating info on that site any more?
I've received no email updates regarding the order.

kong2029

newbie

Activity: 59

Merit: 0

Well, some kind of update or communication would be appreciated.

-Redacted-

hero member

Activity: 574

Merit: 501

Quote from: warhawk187 on September 20, 2013, 12:42:35 PM

Burnin,

I had an order placed for assembly of 6 out of the 12 Bitburners I had planned on ordering from you. This week I converted that order of 6 to Bitfury boards. However, now that Zefirs chips have finally arrived today, I tried to purchase assembly for 12 Bitburner XX boards today, but Paypal says there is an issue with your merchant account. Please help me out here, I have 240 chips that are en route to you as we speak and Paypal is my only method of payment available at the moment. I understand that you are incredibly busy, but now that the chips are here, I would like to pay for assembly and express shipping. Please let me know what the situation is, thanks.

Only Burnin can answer, of course, but my suspicion is that so many people slammed PayPal for refunds when the chips were late, that Paypal froze/closed his account.

Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 32. (Read 624211 times)