Pages:
Author

Topic: [WTS] Custom server PSU breakout boards, 1200w, 1300w, 2000w, 2880w, 4kw - page 11. (Read 73060 times)

legendary
Activity: 1302
Merit: 1318
Technical Analyst/Trader
Just wanted to thank J4bberwock for the 2880W boards,  these boards are great.  Very easy to go dense with miners with these boards and their well made not a single issue.  Thanks again.

Very nice setup, McHouston.

I just purchased 3 of these IBM 2880 watt PSU's myself.  I'm about to order 3 of these breakout boards and 15 AWG cords.

May I ask how many S3's you have hooked up to each 2880 watt PSU?

Also, if you purchased PCI-e cords as well, what length cords did you get?
legendary
Activity: 1638
Merit: 1005
Well done ! Nice setup Tongue
hero member
Activity: 882
Merit: 500
Where am I?
Just wanted to thank J4bberwock for the 2880W boards,  these boards are great.  Very easy to go dense with miners with these boards and their well made not a single issue.  Thanks again.

legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
thought i would throw a post in here - I sell 24" PCIe---PCIe 16awg cables that are ideal for some of the jabberwocky boards. see my signature link for details

(note: the PCIe-PCIe varient costs a little more and that change isnt shown in my threads pricing system YET - its approx $0.10/cable more expensive than the one-ended varient)

I hope you have some serious stock since I'll have more board soon that will use those cables, and the Bladecenter H board deliveries will start next week.

I have about 100 now, and 300 more arriving around the end of the week. For buyers looking at 150+ direct shipping is available and is cheaper/cable but takes an extra week
hero member
Activity: 840
Merit: 1000
thought i would throw a post in here - I sell 24" PCIe---PCIe 16awg cables that are ideal for some of the jabberwocky boards. see my signature link for details

(note: the PCIe-PCIe varient costs a little more and that change isnt shown in my threads pricing system YET - its approx $0.10/cable more expensive than the one-ended varient)

I hope you have some serious stock since I'll have more board soon that will use those cables, and the Bladecenter H board deliveries will start next week.
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
thought i would throw a post in here - I sell 24" PCIe---PCIe 16awg cables that are ideal for some of the jabberwocky boards. see my signature link for details

(note: the PCIe-PCIe varient costs a little more and that change isnt shown in my threads pricing system YET - its approx $0.10/cable more expensive than the one-ended varient)
hero member
Activity: 840
Merit: 1000
J4bberwock, what are dimensions of that connector for your new board, as I have some Lenovo DPS-800 PSUs and
these are shorter then HP DPS-800 PSUs. I think its like 31 vs 25pins on one side. So maybe this new board for DPS-835
will fit...

Hi, sorry, but your lenovo PSU uses a card edge connector like the DPS1200FBA. I'll dig a little on how to start the PSU (unless you already know how) and which connector should be used.
If you have at least 10 PSUs to make, and the connectors is easy to source, it may worth it to make specific boards.
Price should range from 30$ to 45$ depending on the price of the connector and  options needed on the board

Hi J4bberwock,

the 12Vsb (stand-by) line will always be live when the system is connected to power. That corresponds to pin B21. To turn on the rest of the PSU, PSON (pin A21) must be shorted to ground (A1-A9, B1-B9). That will turn on the other pins including the +12V rail (A10-A18, B10-B18).

Hi, you got a PM, I may have found the mating connector, but I need a few extra infos since I don't have access to this particular PSU.
newbie
Activity: 4
Merit: 0
J4bberwock, what are dimensions of that connector for your new board, as I have some Lenovo DPS-800 PSUs and
these are shorter then HP DPS-800 PSUs. I think its like 31 vs 25pins on one side. So maybe this new board for DPS-835
will fit...

Hi, sorry, but your lenovo PSU uses a card edge connector like the DPS1200FBA. I'll dig a little on how to start the PSU (unless you already know how) and which connector should be used.
If you have at least 10 PSUs to make, and the connectors is easy to source, it may worth it to make specific boards.
Price should range from 30$ to 45$ depending on the price of the connector and  options needed on the board

Hi J4bberwock,

the 12Vsb (stand-by) line will always be live when the system is connected to power. That corresponds to pin B21. To turn on the rest of the PSU, PSON (pin A21) must be shorted to ground (A1-A9, B1-B9). That will turn on the other pins including the +12V rail (A10-A18, B10-B18).
hero member
Activity: 840
Merit: 1000
J4bberwock, what are dimensions of that connector for your new board, as I have some Lenovo DPS-800 PSUs and
these are shorter then HP DPS-800 PSUs. I think its like 31 vs 25pins on one side. So maybe this new board for DPS-835
will fit...

Hi, sorry, but your lenovo PSU uses a card edge connector like the DPS1200FBA. I'll dig a little on how to start the PSU (unless you already know how) and which connector should be used.
If you have at least 10 PSUs to make, and the connectors is easy to source, it may worth it to make specific boards.
Price should range from 30$ to 45$ depending on the price of the connector and  options needed on the board
newbie
Activity: 4
Merit: 0
J4bberwock, what are dimensions of that connector for your new board, as I have some Lenovo DPS-800 PSUs and
these are shorter then HP DPS-800 PSUs. I think its like 31 vs 25pins on one side. So maybe this new board for DPS-835
will fit...
hero member
Activity: 840
Merit: 1000
New board made on special request that will be available with a few days delay:
PSU is DPS835-AB, serial numbers 24R2730 - IBM X3650
It delivers 835w even on 110v





Pricing will be as follow:

1-10 boards = 55$
10+ boards = 45$
hero member
Activity: 840
Merit: 1000
Hi, the HP 1300w boards are currently out of stock.
I should get some back in stock next week.
newbie
Activity: 4
Merit: 0
Hi J4bberwock,

I'm interested in 3x PSU breakout boards for HP 1300w 406421-001 + cables and shipping to Slovakia.

Thnx
newbie
Activity: 21
Merit: 0
hi could you give me a price for 3 boards for  HP DL580 G3 ML570 G3 power supply 1300 Watts  and 8 pci- 6 pin leads and delivery to uk
hero member
Activity: 840
Merit: 1000
Jabberwock-
I am interested in the boards for the hp1200 DL580 G5 are they instock.
I am trying to figure out cost wise per gh, if I should order the s5 instead
of the c1. I can put two s5's (600 watt each) on one DL580 G5
if I have your board. They need 4 pci-e connectors each so total 8
6 pin pcie connectors off the board. Will that work with normnal or XL?

Do I need an XL I am kind of confused. I pm-ed you also can you please advise?
I would like to order pls contact me.





Hi, the DPS 1200 FBA and DPS2000BB boards are almost always in stock so no worries for them.
They only exist in XL design for now. A smaller PCI-E design similar to the white one for the HP 1300w is on its way, but probably not released until february.
newbie
Activity: 8
Merit: 0
Jabberwock-
I am interested in the boards for the hp1200 DL580 G5 are they instock.
I am trying to figure out cost wise per gh, if I should order the s5 instead
of the c1. I can put two s5's (600 watt each) on one DL580 G5
if I have your board. They need 4 pci-e connectors each so total 8
6 pin pcie connectors off the board. Will that work with normnal or XL?

Do I need an XL I am kind of confused. I pm-ed you also can you please advise?
I would like to order pls contact me.



newbie
Activity: 14
Merit: 0
Hi J4bberwock,
What is the part number of the connector, I can check with my contacts to see if I can get any. I also would like to buy several of these but really would like them before the end of January.
legendary
Activity: 1246
Merit: 1024
Do you have breakout boards for HP DL580 1300W server supply. I would want to buy one board with 4 cables shipped to Thailand. The lowest cost Air Mail service would be fine. Registered can be added if not too expensive. I hope to hear back from you soon.
newbie
Activity: 42
Merit: 0
can you quota me a price for an HP 6 pin PCI-Express 1300 watt Server Power Supply with breakout board and 6 or 12 pci-e connectors.
ty.
newbie
Activity: 9
Merit: 0
Please calculate 4 boards for DPS-2000 without PSU and with PCI-E cables. Shipping to Bulgaria.
Pages:
Jump to: