[WTS] Custom server PSU breakout boards, 1200w, 1300w, 2000w, 2880w, 4kw - page 9.

FlensGold

legendary

Activity: 1405

Merit: 1001

I received a big package from J4abberwock these days and I would like to mention that he is doing a great job.
Shipping was very fast and trackable and after he realized that there was a problem with a few cables (I did not even realize it until then) he sent an additional express package including the correct cables for free. Simply awesome!

Regarding the Titan Adapter I have to say that it works powering the Titan controller, also well done!

One question to the other users:
I just connected my 4-cube Titan incl. Controller to a DPS2000 PSU. Well, not hard to imagine that the PSU is getting hot. How do you cool your PSU? Any recommendations are welcome

Stoneface

newbie

Activity: 25

Merit: 0

Hi J4abberwock,

are you still selling this hardware?

i'm interested in:
2x DPS 2000-BB Breakout board
10x 6 pins PCI-E cables 50cm long, 16AWG wires

should be shipped to Germany near Frankfurt.

Best
Stonie

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: Meech on June 09, 2015, 12:01:35 AM

Quote from: J4bberwock on May 09, 2015, 03:20:31 PM

Small teaser for the S4 PSU breakout board:

White connector is for the remote switch.

And here are some pics from developpment.

http://imgur.com/a/3G5zL#0

The white plastic sheet was used to simulate thickness and dimensions of a metal sheet for the enclosure.

Are you offering this as a replacement psu and board for the S4? And when will this be available if so? Bitmain is pushing me towards their new psu but it's 220-240 volt, not exactly a replacement for us that have 110-120 volt setups.

Hi, I'm still waiting to get the cages/housings made to hold the board and PSUs, but if you are in a hurry, one board and 2 of the DPS1200FA or similar Common Slot power supplies are the strict minimum you'll need.

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: padrino on June 09, 2015, 07:00:48 AM

Quote from: J4bberwock on June 08, 2015, 02:18:59 PM

Quote from: FlensGold on May 10, 2015, 04:03:29 PM

Hello,
are there any adapters/boards available which can power a KNC Titan (4-8x PCIe, 1600W + 1x5v Molex for Controller)?
Most boards "only" have connectors for PCIe, but I wouldn't like an extra PSU for the Controllerboard. Any suggestions?
Kind regards

And here are the first pics of the boards:

2x USB ports able to charge Iphone/pad/pod, Samsung,... at full speed
Or simply power raspberries/beaglebone...

1x Molex HDD connector with a cable to power a KNC controller.

The board is a pass through, so you can still use your PCI-E cable to power anything.

Rated at 3A, over 92% efficiency for the voltage converter, you'll only draw 16w from your PSU if you manage to max out the USB ports and the Moles HDD plug.

Price will be 19$ for the first batch, including one short PCI-E to PCI-E cable and one Molex HDD to Molex HDD cable.

Have you tested these with a Neptune or Titan controller yet? I built something similar but used an off the shelf 12V -> 5V 3A step down.. The Neptune spikes above 3A from time to time so I can't keep the controller stable when it is running at more than 2Th or so. I picked up some 8A converters to wire in and haven't had an issue since, haven't measured the actual peak usage though, I know 8A is way overkill.

Thanks for letting me know, it's an upgrade to the one I'm using to power raspberries or charge my phone when I'm next to the miners. no KNC units here.
The buck converter should handle a bit more than 3A, but I'll look at another one just in case it'd fail.
A few units have been dispatched for testing.

padrino

legendary

Activity: 1428

Merit: 1000

https://www.bitworks.io

Quote from: J4bberwock on June 08, 2015, 02:18:59 PM

Quote from: FlensGold on May 10, 2015, 04:03:29 PM

Hello,
are there any adapters/boards available which can power a KNC Titan (4-8x PCIe, 1600W + 1x5v Molex for Controller)?
Most boards "only" have connectors for PCIe, but I wouldn't like an extra PSU for the Controllerboard. Any suggestions?
Kind regards

And here are the first pics of the boards:

2x USB ports able to charge Iphone/pad/pod, Samsung,... at full speed
Or simply power raspberries/beaglebone...

1x Molex HDD connector with a cable to power a KNC controller.

The board is a pass through, so you can still use your PCI-E cable to power anything.

Rated at 3A, over 92% efficiency for the voltage converter, you'll only draw 16w from your PSU if you manage to max out the USB ports and the Moles HDD plug.

Price will be 19$ for the first batch, including one short PCI-E to PCI-E cable and one Molex HDD to Molex HDD cable.

Have you tested these with a Neptune or Titan controller yet? I built something similar but used an off the shelf 12V -> 5V 3A step down.. The Neptune spikes above 3A from time to time so I can't keep the controller stable when it is running at more than 2Th or so. I picked up some 8A converters to wire in and haven't had an issue since, haven't measured the actual peak usage though, I know 8A is way overkill.

Meech

hero member

Activity: 924

Merit: 1000

Quote from: J4bberwock on May 09, 2015, 03:20:31 PM

Small teaser for the S4 PSU breakout board:

White connector is for the remote switch.

And here are some pics from developpment.

http://imgur.com/a/3G5zL#0

The white plastic sheet was used to simulate thickness and dimensions of a metal sheet for the enclosure.

Are you offering this as a replacement psu and board for the S4? And when will this be available if so? Bitmain is pushing me towards their new psu but it's 220-240 volt, not exactly a replacement for us that have 110-120 volt setups.

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: FlensGold on May 10, 2015, 04:03:29 PM

Hello,
are there any adapters/boards available which can power a KNC Titan (4-8x PCIe, 1600W + 1x5v Molex for Controller)?
Most boards "only" have connectors for PCIe, but I wouldn't like an extra PSU for the Controllerboard. Any suggestions?
Kind regards

And here are the first pics of the boards:

2x USB ports able to charge Iphone/pad/pod, Samsung,... at full speed
Or simply power raspberries/beaglebone...

1x Molex HDD connector with a cable to power a KNC controller.

The board is a pass through, so you can still use your PCI-E cable to power anything.

Rated at 3A, over 92% efficiency for the voltage converter, you'll only draw 16w from your PSU if you manage to max out the USB ports and the Moles HDD plug.

Price will be 19$ for the first batch, including one short PCI-E to PCI-E cable and one Molex HDD to Molex HDD cable.

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: PlanetCrypto on May 18, 2015, 07:57:53 AM

Quote from: J4bberwock on May 07, 2015, 03:20:43 PM

Back from holidays with a quick update:

New design boards with PCI-E plugs instead of screw terminals have been sold for the last 3 months, I'll take some pictures of them to update the first post.
The following boards are concerned:
DL580 G3 STD (8 PCI-E plugs)
Common Slot STD (8 PCI-E plugs)
DPS2000 BB XL (12 PCI_E plugs)

All the boards including the Bladecenter H 2880w are now in stock.

Double ended PCI-E cables are also available in 24" and 36" as well as custom length.

DL580 G3 XL is discontinued because of the lack of supply on the main connector
Common Slot XL was repleaced by a STD version with 8 PCI-E plugs (more than enough for 1200w)

A new board will also be released soon to allow those with faulty S4 PSUs to have something really close to stock size but with more power (at least 1600w) and that can be powered from 110v.
The product reached its final steps: design of the enclosure that will be attached in place of the original PSU.

Do you have the DPS2000 BB XL (12 PCI_E plugs) in stock?
Cost?
UPS Shipping cost of 1-6 boards to Longville, MN USA 56655 ?

Thanks,
PlanetCrypto.com, LLC
Jeff Schlenker, CEO
1199 State Hwy 200 NE
Longville, MN USA 56655

you got PM

PlanetCrypto

sr. member

Activity: 462

Merit: 250

Quote from: J4bberwock on May 07, 2015, 03:20:43 PM

Back from holidays with a quick update:

New design boards with PCI-E plugs instead of screw terminals have been sold for the last 3 months, I'll take some pictures of them to update the first post.
The following boards are concerned:
DL580 G3 STD (8 PCI-E plugs)
Common Slot STD (8 PCI-E plugs)
DPS2000 BB XL (12 PCI_E plugs)

All the boards including the Bladecenter H 2880w are now in stock.

Double ended PCI-E cables are also available in 24" and 36" as well as custom length.

DL580 G3 XL is discontinued because of the lack of supply on the main connector
Common Slot XL was repleaced by a STD version with 8 PCI-E plugs (more than enough for 1200w)

A new board will also be released soon to allow those with faulty S4 PSUs to have something really close to stock size but with more power (at least 1600w) and that can be powered from 110v.
The product reached its final steps: design of the enclosure that will be attached in place of the original PSU.

Do you have the DPS2000 BB XL (12 PCI_E plugs) in stock?
Cost?
UPS Shipping cost of 1-6 boards to Longville, MN USA 56655 ?

Thanks,
PlanetCrypto.com, LLC
Jeff Schlenker, CEO
1199 State Hwy 200 NE
Longville, MN USA 56655

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: soulistyce on May 14, 2015, 03:34:48 PM

Quote from: soulistyce on May 14, 2015, 03:04:56 PM

need help, the psu arrive today, but something wrong with it everytime i plug it it short circuits and mainboard of my home electricity shuts off, what can i do to plug it???

hi, sorry, i already find out whats was wrong, one of the screws of one of the fans was touching something inside i open it and fix it, now its working perfectly, thanks

As I said yesterday, the PSU was tested before shipping.
That's the reason why the fans were still plugged in the breakout board when you received them.
I'm getting the fans with bare wires and I add the connectors myself.
Testing before shipping allows to check the following:
-Functionality of the breakout board
-Functionality of the PSU
-Functionality of the fans and correct polarity of the connector

But the brass spacers I'm using could have moved during transport to touch something inside the PSU.

Your feedback will help to improve the service, so I'll add some insulation to the next DPS2000 kits to avoid any future issue.

soulistyce

hero member

Activity: 701

Merit: 511

Quote from: soulistyce on May 14, 2015, 03:04:56 PM

need help, the psu arrive today, but something wrong with it everytime i plug it it short circuits and mainboard of my home electricity shuts off, what can i do to plug it???

hi, sorry, i already find out whats was wrong, one of the screws of one of the fans was touching something inside i open it and fix it, now its working perfectly, thanks

soulistyce

hero member

Activity: 701

Merit: 511

need help, the psu arrive today, but something wrong with it everytime i plug it it short circuits and mainboard of my home electricity shuts off, what can i do to plug it???

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: FlensGold on May 10, 2015, 04:03:29 PM

Hello,
are there any adapters/boards available which can power a KNC Titan (4-8x PCIe, 1600W + 1x5v Molex for Controller)?
Most boards "only" have connectors for PCIe, but I wouldn't like an extra PSU for the Controllerboard. Any suggestions?
Kind regards

I've been working on something to power a Raspberry and optionnally charge my phone from my server PSUs while I'm messing around with the miners. I can make a little upgrade to the circuit board to also output the +5v to a molex connector.
I'll need up to 2 weeks to have some of those boards in hands.

FlensGold

legendary

Activity: 1405

Merit: 1001

Hello,
are there any adapters/boards available which can power a KNC Titan (4-8x PCIe, 1600W + 1x5v Molex for Controller)?
Most boards "only" have connectors for PCIe, but I wouldn't like an extra PSU for the Controllerboard. Any suggestions?
Kind regards

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: Akgeek on May 10, 2015, 02:15:41 AM

anyone making breakout boards for dell poweredge 1855 power supply? let me know, Ian

Not yet, it may be a new one when I'll have some time to work on it.

Akgeek

newbie

Activity: 2

Merit: 0

anyone making breakout boards for dell poweredge 1855 power supply? let me know, Ian

J4bberwock

hero member

Activity: 840

Merit: 1000

Small teaser for the S4 PSU breakout board:

White connector is for the remote switch.

And here are some pics from developpment.

http://imgur.com/a/3G5zL#0

The white plastic sheet was used to simulate thickness and dimensions of a metal sheet for the enclosure.

J4bberwock

hero member

Activity: 840

Merit: 1000

Back from holidays with a quick update:

New design boards with PCI-E plugs instead of screw terminals have been sold for the last 3 months, I'll take some pictures of them to update the first post.
The following boards are concerned:
DL580 G3 STD (8 PCI-E plugs)
Common Slot STD (8 PCI-E plugs)
DPS2000 BB XL (12 PCI_E plugs)

All the boards including the Bladecenter H 2880w are now in stock.

Double ended PCI-E cables are also available in 24" and 36" as well as custom length.

DL580 G3 XL is discontinued because of the lack of supply on the main connector
Common Slot XL was repleaced by a STD version with 8 PCI-E plugs (more than enough for 1200w)

A new board will also be released soon to allow those with faulty S4 PSUs to have something really close to stock size but with more power (at least 1600w) and that can be powered from 110v.
The product reached its final steps: design of the enclosure that will be attached in place of the original PSU.

soulistyce

hero member

Activity: 701

Merit: 511

sorry for the delay, i finaly got the money, do you still have them for sale, ive just send you a pm, im waiting for your reply to make the payment for the psu+cables+fans+breakoutboard

lulu.luel

newbie

Activity: 1

Merit: 0

Hi! I need a breakout board for IBM 39Y7349. I can know how much it costs? Still have available large quantities? I will buy one at the moment, then several more. I need you to send to Argentina. I await your response.

Topic: [WTS] Custom server PSU breakout boards, 1200w, 1300w, 2000w, 2880w, 4kw - page 9. (Read 73077 times)