[WTS] Terminator A2MEGA Scrypt Miner (110 Mh/s) [SOLD] [BEWARE] - page 3.

vilain

full member

Activity: 126

Merit: 100

Quote from: quakefiend420 on February 02, 2016, 11:51:36 AM

Quote from: vilain on February 02, 2016, 07:57:00 AM

Ok, I guess it turned out to be too expensive. So now I'm ready to pay for all the expenses.

Buyer will pay only 650 $.

I will pay escrow fees and shipping costs.

Buyer must agree to release the funds as soon as the escrow confirms the product quality.

Do you want to go ahead and work on getting it shipped to me so that you're ahead of the game once you confirm a buyer?

Why would I do that?

I'm only shipping after payment is confirmed!

BTW, I was under the impression you had a highly positive trust, but now it shows your trust is 0.

is this a bug? Don't you have any trusted feedback? I can't accept you as escrow if you don't.

tks

quakefiend420

legendary

Activity: 784

Merit: 1000

Quote from: vilain on February 02, 2016, 07:57:00 AM

Ok, I guess it turned out to be too expensive. So now I'm ready to pay for all the expenses.

Buyer will pay only 650 $.

I will pay escrow fees and shipping costs.

Buyer must agree to release the funds as soon as the escrow confirms the product quality.

Do you want to go ahead and work on getting it shipped to me so that you're ahead of the game once you confirm a buyer?

vilain

full member

Activity: 126

Merit: 100

Ok, I guess it turned out to be too expensive. So now I'm ready to pay for all the expenses.

Buyer will pay only 650 $.

I will pay escrow fees and shipping costs.

Buyer must agree to release the funds as soon as the escrow confirms the product quality.

vilain

full member

Activity: 126

Merit: 100

Quote from: quakefiend420 on February 01, 2016, 02:53:59 PM

Quote from: BtcCrazy1 on February 01, 2016, 12:01:41 PM

Quote from: quakefiend420 on February 01, 2016, 09:54:02 AM

Quote from: vilain on February 01, 2016, 06:25:18 AM

Quote from: quakefiend420 on February 01, 2016, 01:51:55 AM

Quote from: vilain on January 31, 2016, 08:44:14 PM

Quote from: quakefiend420 on January 31, 2016, 07:07:14 PM

Yes, I do.

As to your other question, yes that would be fine as long as it doesn't drag out for months or anything. As long as we can sort a buyer within 30 days or so, that's cool.

That's very nice! Thank you for your answers so far.

Another question: after you receive the machine the funds would be cleared to me (minus expenses and your fee)? The reason I ask is that, although I must obviously trust you in the deal, I think it would make more sense if I wasn't responsible for your shipping and eventual issues with the buyer. I mean, after you verify the machine, will you become the person responsible for it?

Escrow will be released when the buyer confirms receipt and requests it be released, just as with any other escrowed transaction. All that I'm doing is confirming that the miner works and isn't damaged, I'm not assuming ownership of it.

I will be shipping using a label that you or the buyer provide to me(this will need to be determined beforehand), I have no control over the package once it leaves my hands, so I cannot assume responsibility from there.

I understand. My concern is this:

In order for this to go through I would still have to trust the buyer as well, since he could just tell the escrow the package arrived damaged. What could I do then? The escrow would have to give the money back (although he verified the product and charged for it), and I would have no way to recover the machine.

This is costing me a fortune already, I can`t afford to pay the costs of freight and end up without machine and money.

I just had an ideia, if I could find someone interested that happens to know somebody from Brazil that could verify my identity (and that I could talk to and show documents and papers), maybe that way the sale could go smoothly, don`t you think? As I said, I`m no scammer and in my line of work I depend highly on my reputation to eat. Of course you don`t have how to verify any of this, but maybe someone in Brazil, that the buyer trusts, could verify it for him.

I`m really lost in ideas here guys. Please note that I would have to spend freight money in advance, so, for me, if there are risks involved, I would rather just tell Shipito to keep my miner for them (or destroy it, or whatever).

That is a good point. This is a bit of an abnormal escrow situation since it's 3 way shipping...

I suppose the best thing to do would be for the buyer to agree to release escrow once I've validated the miner. That requires the buyer to just trust that I'm not going to send them a box of rocks or something, but they're already trusting me to validate the miner anyway, so not that much of a stretch.

agreed quake, but problem falls to the buyer that is taking this multiple shipping charges for having it sent to a to b and whatever elese. That it puts the price close to 900 I'm assuming.

From me to just about anywhere else in the country via FedEx should be around $50 or less. The seller is definitely taking a bath on the shipping to and from Brazil though, I'm sure.

The shipping to Brazil cost me 300 USD with taxes, and Shipito and DHL fees. I'm not paying anything for the return to USA, since it's just a traditional return to sender (I'm not shipping it to USA, the package never left DHL custody).

The shipping from Zoomhash to Shipito facilities in California cost me 50 USD via UPS.

I believe that's the average shipping expenses within the USA, so that would make 100 dollars of shipping costs.

Plus 50 USD escrow fee = 150 USD.

That would leave me with only 500 USD, which is not fair in my opinion. What do you think about splitting it with the buyer?

Buyer would pay a total of 725 USD for a perfect, verified, delivered to his place machine.

Still way better than Zoom's 799 + 50, no?

Would that work?

Please, those who said were interested, what is your opinion? Would you clear the money after the escrow confirms it?

quakefiend420

legendary

Activity: 784

Merit: 1000

Quote from: BtcCrazy1 on February 01, 2016, 12:01:41 PM

Quote from: quakefiend420 on February 01, 2016, 09:54:02 AM

Quote from: vilain on February 01, 2016, 06:25:18 AM

Quote from: quakefiend420 on February 01, 2016, 01:51:55 AM

Quote from: vilain on January 31, 2016, 08:44:14 PM

Quote from: quakefiend420 on January 31, 2016, 07:07:14 PM

Yes, I do.

As to your other question, yes that would be fine as long as it doesn't drag out for months or anything. As long as we can sort a buyer within 30 days or so, that's cool.

That's very nice! Thank you for your answers so far.

Another question: after you receive the machine the funds would be cleared to me (minus expenses and your fee)? The reason I ask is that, although I must obviously trust you in the deal, I think it would make more sense if I wasn't responsible for your shipping and eventual issues with the buyer. I mean, after you verify the machine, will you become the person responsible for it?

Escrow will be released when the buyer confirms receipt and requests it be released, just as with any other escrowed transaction. All that I'm doing is confirming that the miner works and isn't damaged, I'm not assuming ownership of it.

I will be shipping using a label that you or the buyer provide to me(this will need to be determined beforehand), I have no control over the package once it leaves my hands, so I cannot assume responsibility from there.

I understand. My concern is this:

In order for this to go through I would still have to trust the buyer as well, since he could just tell the escrow the package arrived damaged. What could I do then? The escrow would have to give the money back (although he verified the product and charged for it), and I would have no way to recover the machine.

This is costing me a fortune already, I can`t afford to pay the costs of freight and end up without machine and money.

I just had an ideia, if I could find someone interested that happens to know somebody from Brazil that could verify my identity (and that I could talk to and show documents and papers), maybe that way the sale could go smoothly, don`t you think? As I said, I`m no scammer and in my line of work I depend highly on my reputation to eat. Of course you don`t have how to verify any of this, but maybe someone in Brazil, that the buyer trusts, could verify it for him.

I`m really lost in ideas here guys. Please note that I would have to spend freight money in advance, so, for me, if there are risks involved, I would rather just tell Shipito to keep my miner for them (or destroy it, or whatever).

That is a good point. This is a bit of an abnormal escrow situation since it's 3 way shipping...

I suppose the best thing to do would be for the buyer to agree to release escrow once I've validated the miner. That requires the buyer to just trust that I'm not going to send them a box of rocks or something, but they're already trusting me to validate the miner anyway, so not that much of a stretch.

agreed quake, but problem falls to the buyer that is taking this multiple shipping charges for having it sent to a to b and whatever elese. That it puts the price close to 900 I'm assuming.

From me to just about anywhere else in the country via FedEx should be around $50 or less. The seller is definitely taking a bath on the shipping to and from Brazil though, I'm sure.

BtcCrazy1

hero member

Activity: 603

Merit: 500

Quote from: quakefiend420 on February 01, 2016, 09:54:02 AM

Quote from: vilain on February 01, 2016, 06:25:18 AM

Quote from: quakefiend420 on February 01, 2016, 01:51:55 AM

Quote from: vilain on January 31, 2016, 08:44:14 PM

Quote from: quakefiend420 on January 31, 2016, 07:07:14 PM

Yes, I do.

As to your other question, yes that would be fine as long as it doesn't drag out for months or anything. As long as we can sort a buyer within 30 days or so, that's cool.

That's very nice! Thank you for your answers so far.

Another question: after you receive the machine the funds would be cleared to me (minus expenses and your fee)? The reason I ask is that, although I must obviously trust you in the deal, I think it would make more sense if I wasn't responsible for your shipping and eventual issues with the buyer. I mean, after you verify the machine, will you become the person responsible for it?

Escrow will be released when the buyer confirms receipt and requests it be released, just as with any other escrowed transaction. All that I'm doing is confirming that the miner works and isn't damaged, I'm not assuming ownership of it.

I will be shipping using a label that you or the buyer provide to me(this will need to be determined beforehand), I have no control over the package once it leaves my hands, so I cannot assume responsibility from there.

I understand. My concern is this:

In order for this to go through I would still have to trust the buyer as well, since he could just tell the escrow the package arrived damaged. What could I do then? The escrow would have to give the money back (although he verified the product and charged for it), and I would have no way to recover the machine.

This is costing me a fortune already, I can`t afford to pay the costs of freight and end up without machine and money.

I just had an ideia, if I could find someone interested that happens to know somebody from Brazil that could verify my identity (and that I could talk to and show documents and papers), maybe that way the sale could go smoothly, don`t you think? As I said, I`m no scammer and in my line of work I depend highly on my reputation to eat. Of course you don`t have how to verify any of this, but maybe someone in Brazil, that the buyer trusts, could verify it for him.

I`m really lost in ideas here guys. Please note that I would have to spend freight money in advance, so, for me, if there are risks involved, I would rather just tell Shipito to keep my miner for them (or destroy it, or whatever).

That is a good point. This is a bit of an abnormal escrow situation since it's 3 way shipping...

I suppose the best thing to do would be for the buyer to agree to release escrow once I've validated the miner. That requires the buyer to just trust that I'm not going to send them a box of rocks or something, but they're already trusting me to validate the miner anyway, so not that much of a stretch.

agreed quake, but problem falls to the buyer that is taking this multiple shipping charges for having it sent to a to b and whatever elese. That it puts the price close to 900 I'm assuming.

BtcCrazy1

hero member

Activity: 603

Merit: 500

Yea, I would close it then since you've never even touched this it's a ghost to you and us. So unless you are sending this to an escrow with free shipment to the escrow this won't happen. This would likely be the price for me to get one locally sending it to 2 places.

quakefiend420

legendary

Activity: 784

Merit: 1000

Quote from: vilain on February 01, 2016, 06:25:18 AM

Quote from: quakefiend420 on February 01, 2016, 01:51:55 AM

Quote from: vilain on January 31, 2016, 08:44:14 PM

Quote from: quakefiend420 on January 31, 2016, 07:07:14 PM

Yes, I do.

As to your other question, yes that would be fine as long as it doesn't drag out for months or anything. As long as we can sort a buyer within 30 days or so, that's cool.

That's very nice! Thank you for your answers so far.

Another question: after you receive the machine the funds would be cleared to me (minus expenses and your fee)? The reason I ask is that, although I must obviously trust you in the deal, I think it would make more sense if I wasn't responsible for your shipping and eventual issues with the buyer. I mean, after you verify the machine, will you become the person responsible for it?

Escrow will be released when the buyer confirms receipt and requests it be released, just as with any other escrowed transaction. All that I'm doing is confirming that the miner works and isn't damaged, I'm not assuming ownership of it.

I will be shipping using a label that you or the buyer provide to me(this will need to be determined beforehand), I have no control over the package once it leaves my hands, so I cannot assume responsibility from there.

I understand. My concern is this:

In order for this to go through I would still have to trust the buyer as well, since he could just tell the escrow the package arrived damaged. What could I do then? The escrow would have to give the money back (although he verified the product and charged for it), and I would have no way to recover the machine.

This is costing me a fortune already, I can`t afford to pay the costs of freight and end up without machine and money.

I just had an ideia, if I could find someone interested that happens to know somebody from Brazil that could verify my identity (and that I could talk to and show documents and papers), maybe that way the sale could go smoothly, don`t you think? As I said, I`m no scammer and in my line of work I depend highly on my reputation to eat. Of course you don`t have how to verify any of this, but maybe someone in Brazil, that the buyer trusts, could verify it for him.

I`m really lost in ideas here guys. Please note that I would have to spend freight money in advance, so, for me, if there are risks involved, I would rather just tell Shipito to keep my miner for them (or destroy it, or whatever).

That is a good point. This is a bit of an abnormal escrow situation since it's 3 way shipping...

I suppose the best thing to do would be for the buyer to agree to release escrow once I've validated the miner. That requires the buyer to just trust that I'm not going to send them a box of rocks or something, but they're already trusting me to validate the miner anyway, so not that much of a stretch.

vilain

full member

Activity: 126

Merit: 100

Quote from: BtcCrazy1 on February 01, 2016, 03:27:16 AM

Shipito, seems to be a very bad service provider with poor customer care and problems with "losing" people's merchandise. Also seems to be over priced so I could take this if we split the difference on shipping I would have no problem with escrow especially with quake, but my problem would be the expense shipping to him then the shipment to Pa, witch I would expect to be at least 150$.

Let me know in no circumstances I will send first to someone with no credibility so chances are this will fall through unless you send first or you pay escrow fee.

Please read the post above this.

I appreciate your interest but please note there are more complexity in this transaction than a simple matter of paying the escrow fee.

As I said before, I am not running any risks here, because I already lost a fortune with this stupid idea and I can`t afford to waste more money on this. So, whether we figure a way to make it without risks for me, or we just close this thread.

If paying escrow fees is the issue, i can pay it. In fact I have stated it before. But there are other issues here.

vilain

full member

Activity: 126

Merit: 100

Quote from: quakefiend420 on February 01, 2016, 01:51:55 AM

Quote from: vilain on January 31, 2016, 08:44:14 PM

Quote from: quakefiend420 on January 31, 2016, 07:07:14 PM

Yes, I do.

As to your other question, yes that would be fine as long as it doesn't drag out for months or anything. As long as we can sort a buyer within 30 days or so, that's cool.

That's very nice! Thank you for your answers so far.

Another question: after you receive the machine the funds would be cleared to me (minus expenses and your fee)? The reason I ask is that, although I must obviously trust you in the deal, I think it would make more sense if I wasn't responsible for your shipping and eventual issues with the buyer. I mean, after you verify the machine, will you become the person responsible for it?

Escrow will be released when the buyer confirms receipt and requests it be released, just as with any other escrowed transaction. All that I'm doing is confirming that the miner works and isn't damaged, I'm not assuming ownership of it.

I will be shipping using a label that you or the buyer provide to me(this will need to be determined beforehand), I have no control over the package once it leaves my hands, so I cannot assume responsibility from there.

I understand. My concern is this:

In order for this to go through I would still have to trust the buyer as well, since he could just tell the escrow the package arrived damaged. What could I do then? The escrow would have to give the money back (although he verified the product and charged for it), and I would have no way to recover the machine.

This is costing me a fortune already, I can`t afford to pay the costs of freight and end up without machine and money.

I just had an ideia, if I could find someone interested that happens to know somebody from Brazil that could verify my identity (and that I could talk to and show documents and papers), maybe that way the sale could go smoothly, don`t you think? As I said, I`m no scammer and in my line of work I depend highly on my reputation to eat. Of course you don`t have how to verify any of this, but maybe someone in Brazil, that the buyer trusts, could verify it for him.

I`m really lost in ideas here guys. Please note that I would have to spend freight money in advance, so, for me, if there are risks involved, I would rather just tell Shipito to keep my miner for them (or destroy it, or whatever).

BtcCrazy1

hero member

Activity: 603

Merit: 500

Shipito, seems to be a very bad service provider with poor customer care and problems with "losing" people's merchandise. Also seems to be over priced so I could take this if we split the difference on shipping I would have no problem with escrow especially with quake, but my problem would be the expense shipping to him then the shipment to Pa, witch I would expect to be at least 150$.

Let me know in no circumstances I will send first to someone with no credibility so chances are this will fall through unless you send first or you pay escrow fee.

quakefiend420

legendary

Activity: 784

Merit: 1000

Quote from: vilain on January 31, 2016, 08:44:14 PM

Quote from: quakefiend420 on January 31, 2016, 07:07:14 PM

Yes, I do.

As to your other question, yes that would be fine as long as it doesn't drag out for months or anything. As long as we can sort a buyer within 30 days or so, that's cool.

That's very nice! Thank you for your answers so far.

Another question: after you receive the machine the funds would be cleared to me (minus expenses and your fee)? The reason I ask is that, although I must obviously trust you in the deal, I think it would make more sense if I wasn't responsible for your shipping and eventual issues with the buyer. I mean, after you verify the machine, will you become the person responsible for it?

Escrow will be released when the buyer confirms receipt and requests it be released, just as with any other escrowed transaction. All that I'm doing is confirming that the miner works and isn't damaged, I'm not assuming ownership of it.

I will be shipping using a label that you or the buyer provide to me(this will need to be determined beforehand), I have no control over the package once it leaves my hands, so I cannot assume responsibility from there.

HardForkComing

full member

Activity: 238

Merit: 100

You like to play games, don't you? Well, I like to play games too.

Message above yours, your sock puppet.

You log off, he logged. He logs off, you logged.

You're BR, correct?

By mistake, it happens your sock's first msg is in Portugese, which is spoken in Brasil.

His time zone: February 01, 2016, 02:30:10 AM
Your time zone: February 01, 2016, 02:30:10 AM

Kind of weird, right?

You say my method is "babystyle"

LOL, YET, YOU'RE USING MY METHOD HAHA.
Does that make you a baby?

https://bitcointalksearch.org/topic/m.13674408

https://bitcointalksearch.org/topic/m.13495412

And this, LMAO
https://bitcointalksearch.org/topic/m.13724910

Dude, you're the biggest retard in the world. I swear. You're using MY METHOD which is GENUINE. You got your ROI + EARNED money, and you call ME a scammer? FML! HAHA

EDIT: Now you're offline, your sock is online:

-_-_-_-

vilain

full member

Activity: 126

Merit: 100

Quote from: HardForkComing on January 31, 2016, 09:04:20 PM

I would be careful dealing with this user. He once purchased an ebook from me, among with other 10+ people. He wasn't satisfied because he couldn't read the tutorial properly (his fault) and then he made a big scene and leaked my genuine tutorial.
No one else had any issues with that specific ebook, just him.

Blazed's review can be found in the link below.
If he tried to extort someone for $15, what's gonna he do for $650-700?

Extortion proof: https://bitcointalksearch.org/topic/m.13111167

uow man, u gotta be joking

do you check my posts page daily since you sold me that stupid thing you called "guide" and I tried to receive my money back?

Get a life, bro.

If I'm being that careful and accepting an escrow it's obvious I'm not planning to scam anyone. Why the hell would I be talking about an escrow? Do you even know what that means???

btw, you think I tried to cheat on you, but this is because you are plain stupid. That was not the case.

I'm sure potential buyers will not fall for your naive attempt to harm me as vengeance for leaking your """""""""""""""""method""""""""""""""""

go sell your baby-style methods and leave the adults conduct real business ok?

lostintranslation

member

Activity: 62

Merit: 10

wtf

please clarify

HardForkComing

full member

Activity: 238

Merit: 100

I would be careful dealing with this user. He once purchased an ebook from me, among with other 10+ people. He wasn't satisfied because he couldn't read the tutorial properly (his fault) and then he made a big scene and leaked my genuine tutorial.
No one else had any issues with that specific ebook, just him.

Blazed's review can be found in the link below.
If he tried to extort someone for $15, what's gonna he do for $650-700?

Extortion proof: https://bitcointalksearch.org/topic/m.13111167

vilain

full member

Activity: 126

Merit: 100

Quote from: quakefiend420 on January 31, 2016, 07:07:14 PM

Yes, I do.

As to your other question, yes that would be fine as long as it doesn't drag out for months or anything. As long as we can sort a buyer within 30 days or so, that's cool.

That's very nice! Thank you for your answers so far.

Another question: after you receive the machine the funds would be cleared to me (minus expenses and your fee)? The reason I ask is that, although I must obviously trust you in the deal, I think it would make more sense if I wasn't responsible for your shipping and eventual issues with the buyer. I mean, after you verify the machine, will you become the person responsible for it?

quakefiend420

legendary

Activity: 784

Merit: 1000

Quote from: vilain on January 31, 2016, 06:35:32 PM

Quote from: emosewa on January 31, 2016, 05:46:40 PM

Quote from: quakefiend420 on January 31, 2016, 04:01:49 PM

OGNasty is a reputable escrow around here. If he's not interested in validating the hardware itself I'd be willing to do it for you for $50(payable in BTC at the time that I ship it to the new owner). For that I'll unpack it, inspect it for physical damage, power it on and point it to litecoinpool.org using your worker info so you can see it hashing for a few hours(I've owned several of these miners in the past and am familiar with configuration), and then repack and forward it along using a shipping label that you provide. I'm located in TX. I'll escrow the miner funds themselves as well if you like.

If it came from Zoomhash it's likely just fine assuming nothing got damaged during shipping, they're a trustworthy team.

I recommend Vilain pay the $50 and do that regardless. It would be a much easier sell once in your hands quake. I just can't absorb the $50. It makes it a borderline deal for me.

emosewa, I have no problem making business with you. Regardless of buyer's status or activity, I'll only dispatch it after the escrow confirms receiving the funds.

quakefiend420 I really appreciate your disposal of helping with this trade. I think $50 is a fair price for the worries. One question: I'm not sure (expect to confirm it when it arrives at Shipito facilities), but I think the miner came from Zoom without the power cables. Would you happen to have the proper power cable in order to turn it on?

For everybody interested, I can pay for the verification, but buyer will still need to pay for the freight expenses.

I was afraid this was an impossible deal, but now I have some hope it's gonna work. Thank you! Cheesy

Edit: one more question. I'm trying to think of every possibility, so, imagine transportation damaged the product, would you be willing to wait for me to find a potential buyer for the defective piece? (obviously for a much lower price). I don't think it will be the case since both DHL and Shipito are extremely serious companies, but it's better be safe than sorry.

Yes, I do.

As to your other question, yes that would be fine as long as it doesn't drag out for months or anything. As long as we can sort a buyer within 30 days or so, that's cool.

vilain

full member

Activity: 126

Merit: 100

Quote from: emosewa on January 31, 2016, 05:46:40 PM

Quote from: quakefiend420 on January 31, 2016, 04:01:49 PM

OGNasty is a reputable escrow around here. If he's not interested in validating the hardware itself I'd be willing to do it for you for $50(payable in BTC at the time that I ship it to the new owner). For that I'll unpack it, inspect it for physical damage, power it on and point it to litecoinpool.org using your worker info so you can see it hashing for a few hours(I've owned several of these miners in the past and am familiar with configuration), and then repack and forward it along using a shipping label that you provide. I'm located in TX. I'll escrow the miner funds themselves as well if you like.

If it came from Zoomhash it's likely just fine assuming nothing got damaged during shipping, they're a trustworthy team.

I recommend Vilain pay the $50 and do that regardless. It would be a much easier sell once in your hands quake. I just can't absorb the $50. It makes it a borderline deal for me.

emosewa, I have no problem making business with you. Regardless of buyer's status or activity, I'll only dispatch it after the escrow confirms receiving the funds.

quakefiend420 I really appreciate your disposal of helping with this trade. I think $50 is a fair price for the worries. One question: I'm not sure (expect to confirm it when it arrives at Shipito facilities), but I think the miner came from Zoom without the power cables. Would you happen to have the proper power cable in order to turn it on?

For everybody interested, I can pay for the verification, but buyer will still need to pay for the freight expenses.

I was afraid this was an impossible deal, but now I have some hope it's gonna work. Thank you! Cheesy

Edit: one more question. I'm trying to think of every possibility, so, imagine transportation damaged the product, would you be willing to wait for me to find a potential buyer for the defective piece? (obviously for a much lower price). I don't think it will be the case since both DHL and Shipito are extremely serious companies, but it's better be safe than sorry.

emosewa

newbie

Activity: 22

Merit: 0

Quote from: quakefiend420 on January 31, 2016, 04:01:49 PM

OGNasty is a reputable escrow around here. If he's not interested in validating the hardware itself I'd be willing to do it for you for $50(payable in BTC at the time that I ship it to the new owner). For that I'll unpack it, inspect it for physical damage, power it on and point it to litecoinpool.org using your worker info so you can see it hashing for a few hours(I've owned several of these miners in the past and am familiar with configuration), and then repack and forward it along using a shipping label that you provide. I'm located in TX. I'll escrow the miner funds themselves as well if you like.

If it came from Zoomhash it's likely just fine assuming nothing got damaged during shipping, they're a trustworthy team.

I recommend Vilain pay the $50 and do that regardless. It would be a much easier sell once in your hands quake. I just can't absorb the $50. It makes it a borderline deal for me.

Topic: [WTS] Terminator A2MEGA Scrypt Miner (110 Mh/s) [SOLD] [BEWARE] - page 3. (Read 2989 times)