I loved seeing the $8600+ price. (Thanks okcoin)
You know, it's just seeing the future now. :p
Topic: [WTS] WIFI Bitcoin And Altcoin Price Ticker Screen - afkdata.com - page 4. (Read 20483 times)
November 17, 2017, 12:45:40 AM
November 15, 2017, 03:22:03 PM
Code:
| 34 | OKCoin | https://www.okcoin.com/
+----+------------+--------+------------------+---------------------+---------------------+
| id | exchangeID | fiatID | Price | created_at | updated_at |
+----+------------+--------+------------------+---------------------+---------------------+
| 79 | 34 | 1 | 15151.0000000000 | 2016-02-27 08:42:18 | 2017-11-15 16:12:11 |
+----+------------+--------+------------------+---------------------+---------------------+
this was the issue, just before okcoin usd went down 4 hours ago it sent me the price as 15151 USD this put the averages out.
I have manually set it to a sensible (for now) price
http://price.cryptofolio.info/?codes=USD,AUD,CNY,GBP,JPY
Thanks
November 15, 2017, 12:12:02 PM
Something is wrong with your ticker data.
At the moment it shows BTC $8612 ETH $394
Should be $7239 and $334
Or can it show now future prices?
At the moment it shows BTC $8612 ETH $394
Should be $7239 and $334
Or can it show now future prices?
August 20, 2017, 12:31:36 AM
1. using folder 2. Firmware\nodemcu-flasher-master(1)\nodemcu-flasher-master\Win64 or win32 \release
2. run ESP8266Flasher.exe
3. change to tab 2 "config"
4. on the line that says Internal click the cog
5. use the file dialog to select nodemcu-master-12-modules-2016-03-04-23-35-16-float.bin file from folder 2.
6. make sure it no longer says internal.
7. swap back to first tab "operation"
8. select com port
9. Flash(F)
10. once done unplug from PC
11. Inside folder 3. run afkupdater.exe
12. Note down the COM ports in the list
13. Press arrow next to COM Port
14. If there is one extra COM port select the new port from list (if not install USB com port driver from folder 1.)
15. Look at Circuit board where USB plugs in
16. Set Yellow or Black based on colour
17. Press List Files -> may get error this is normal
18. Press List Files again - no error this time
19. Press Update.
20. Let it do its thing.
21. program will tell you its done and ask to check file sizes that were meant to go in to the device against the ones in their.
once its done the setup page in the device should say v1.6 (under the save button)
2. run ESP8266Flasher.exe
3. change to tab 2 "config"
4. on the line that says Internal click the cog
5. use the file dialog to select nodemcu-master-12-modules-2016-03-04-23-35-16-float.bin file from folder 2.
6. make sure it no longer says internal.
7. swap back to first tab "operation"
8. select com port
9. Flash(F)
10. once done unplug from PC
11. Inside folder 3. run afkupdater.exe
12. Note down the COM ports in the list
13. Press arrow next to COM Port
14. If there is one extra COM port select the new port from list (if not install USB com port driver from folder 1.)
15. Look at Circuit board where USB plugs in
16. Set Yellow or Black based on colour
17. Press List Files -> may get error this is normal
18. Press List Files again - no error this time
19. Press Update.
20. Let it do its thing.
21. program will tell you its done and ask to check file sizes that were meant to go in to the device against the ones in their.
once its done the setup page in the device should say v1.6 (under the save button)
August 19, 2017, 12:15:17 PM
ok, can you get one that has dropped its setting and plug it in to a PC, use the updater in the 3rd folder and press list files.
Im interested to see the results, the first time you will probably get a error just press it again.
oh also it has to be on the correct COM port in the list. (edit: probs not com1)
Im interested to see the results, the first time you will probably get a error just press it again.
oh also it has to be on the correct COM port in the list. (edit: probs not com1)
Updated the firmware, interestingly it didn't erase the wifi settings, but I think it was done correctly. It's holding for 20 mins without resetting itself, I will update in a few hours or tomorrow.
Edit: no luck, it keeps dropping settings.
August 19, 2017, 11:44:10 AM
ok, can you get one that has dropped its setting and plug it in to a PC, use the updater in the 3rd folder and press list files.
Im interested to see the results, the first time you will probably get a error just press it again.
oh also it has to be on the correct COM port in the list. (edit: probs not com1)
Im interested to see the results, the first time you will probably get a error just press it again.
oh also it has to be on the correct COM port in the list. (edit: probs not com1)
August 19, 2017, 11:41:13 AM
Both of my units started to auto reset every 30-60 mins, is there a fix?
Thanks.
Thanks.
just reboot or drop their settings?
there is a software watchdog to reboot after 5 minutes of no data from the server.
They just drop their settings. I see there is an update, but don't know how to apply.
August 19, 2017, 11:30:06 AM
Both of my units started to auto reset every 30-60 mins, is there a fix?
Thanks.
Thanks.
just reboot or drop their settings?
there is a software watchdog to reboot after 5 minutes of no data from the server.
August 19, 2017, 11:24:33 AM
Both of my units started to auto reset every 30-60 mins, is there a fix?
Thanks.
Thanks.
August 09, 2017, 06:42:59 AM
its only AUD?
nope, easiest way to check if it will work is to put the currency code you want on the end, display would show the average (bottom row).
http://price.cryptofolio.info/?codes=AUD,USD,CNY
August 09, 2017, 06:33:53 AM
its only AUD?
August 08, 2017, 04:15:28 PM
Back in stock, if you order before Saturday it will go out Monday or Tuesday.
Thanks
Thanks
August 02, 2017, 06:30:10 AM
whoops for some reason I stopped getting email notifications for this thread.
guys if your having an issue drop me an email and ill try sort through it with you. emails in the contact tab on http://afkdata.com
almost have all the parts to build again, shipping is slow ><
guys if your having an issue drop me an email and ill try sort through it with you. emails in the contact tab on http://afkdata.com
almost have all the parts to build again, shipping is slow ><
July 18, 2017, 11:34:29 AM
Just got mine - having some issues currently similar to Lauda's with the screen going blank and with connection errors. Hopefully the creator comes out with some kind of fix for this...
July 15, 2017, 12:26:52 AM
Very nice, will order one. 
hmmm, out of stock.
hmmm, out of stock.
July 15, 2017, 12:11:10 AM
I am interested in one or two of these Tickers.
How long does any ETA on shipping to the USA?
How long does any ETA on shipping to the USA?
July 04, 2017, 03:52:14 AM
I've had an issue for a while now, and attempted to update to 1.6 in order to resolve it (which it unfortunately did not).
Basically all I could see was an empty screen (after it connects to the Wi-Fi or post setup with stars on the corner). It seems that something was triggering the "Json not found". After minor debugging attempts, it seems to throw the following error:
"PANIC: unprotected error in call to Lua API (http_client.lua:12: attempt to concatenate global 'posStart' (a nil value))".
Update: The configuration "Currency: USD; Altcoin: EUR" doesn't work for me anymore(?). "Currency: EUR; Altcoin: BTC" does. Thanks Mitchell.
http://cryptofolio.info/ is a very bad way of querying the price. I suggest that you change it to something else. LUA seems very simple.
Basically all I could see was an empty screen (after it connects to the Wi-Fi or post setup with stars on the corner). It seems that something was triggering the "Json not found". After minor debugging attempts, it seems to throw the following error:
"PANIC: unprotected error in call to Lua API (http_client.lua:12: attempt to concatenate global 'posStart' (a nil value))".
Update: The configuration "Currency: USD; Altcoin: EUR" doesn't work for me anymore(?). "Currency: EUR; Altcoin: BTC" does. Thanks Mitchell.
http://cryptofolio.info/ is a very bad way of querying the price. I suggest that you change it to something else. LUA seems very simple.
July 01, 2017, 10:07:17 PM
Sweet just bought one of the blue and whites - any idea how long they take to come?
July 01, 2017, 04:08:09 PM
July 01, 2017, 01:59:26 PM
These look pretty sweet - you still selling these?
Jump to: