yes, a 5-10% PoS is another good option.
that is way too high if 5-10%..imo 1% or less than 1% would be better
Topic: www.gcn.zone or www.gcncoin.com our exchange is called www.ircex.com - page 100. (Read 210873 times)
November 11, 2016, 04:07:48 AM
that is way too high if 5-10%..imo 1% or less than 1% would be better
November 11, 2016, 04:04:04 AM
yes, a 5-10% PoS is another good option.
November 11, 2016, 02:44:11 AM
Hi Guys
The blockchain is still not sorted. We are working on it.
Best
Greg
Greg, I am sure prohashing pool is causing this trouble. It's a profit switching pool. When it detects a low hashrate and/or higher exchange rate, it switches to that coin, mines with very high hashrate and leaves the diff high. This is happening with another coin too. The blockchain is still not sorted. We are working on it.
Best
Greg
It took me 6 hours to lower the diff of that coin and within minutes they popped in and raised the diff.
Hi
You may be right. I'm not sure. I have two miners here working now so hopefully it will free up soon.
It seems they mined at a high hashrate and stopped. This caused the jam. I have a low hash rate and am
finding it hard to find a block. How did you lower the diff ?
Best
Greg
I did exactly what you are doing now. I was mining with some small miners too. As soon as I hit 1-2 blocks and I lowered the diff, prohashing entered and raised the diff again so I quit.
I think there are 3 options.
1. talk to them to exclude gcn from their switching policy
2. ban them from the network.
3. wait to see if gcn/doge rate drops so it won't be profitable for them to switch to gcn mining.
4. switch to POS
Hi Doremi,
Thanks for that.
more to think about.
Best
Greg
November 11, 2016, 02:43:27 AM
Hi Guys
The blockchain is still not sorted. We are working on it.
Best
Greg
Greg, I am sure prohashing pool is causing this trouble. It's a profit switching pool. When it detects a low hashrate and/or higher exchange rate, it switches to that coin, mines with very high hashrate and leaves the diff high. This is happening with another coin too. The blockchain is still not sorted. We are working on it.
Best
Greg
It took me 6 hours to lower the diff of that coin and within minutes they popped in and raised the diff.
Hi
You may be right. I'm not sure. I have two miners here working now so hopefully it will free up soon.
It seems they mined at a high hashrate and stopped. This caused the jam. I have a low hash rate and am
finding it hard to find a block. How did you lower the diff ?
Best
Greg
I did exactly what you are doing now. I was mining with some small miners too. As soon as I hit 1-2 blocks and I lowered the diff, prohashing entered and raised the diff again so I quit.
I think there are 3 options.
1. talk to them to exclude gcn from their switching policy
2. ban them from the network.
3. wait to see if gcn/doge rate drops so it won't be profitable for them to switch to gcn mining.
Hi
Thanks for that.
I have two miners working at the moment.
I sold some GCoin to reduce the price
I will keep taking action.
I will contact prohashing. Their equipment is far superior to anything I have access to.
Best
Greg.
November 11, 2016, 02:40:02 AM
Hi Guys
The blockchain is still not sorted. We are working on it.
Best
Greg
Greg, I am sure prohashing pool is causing this trouble. It's a profit switching pool. When it detects a low hashrate and/or higher exchange rate, it switches to that coin, mines with very high hashrate and leaves the diff high. This is happening with another coin too. The blockchain is still not sorted. We are working on it.
Best
Greg
It took me 6 hours to lower the diff of that coin and within minutes they popped in and raised the diff.
Hi
You may be right. I'm not sure. I have two miners here working now so hopefully it will free up soon.
It seems they mined at a high hashrate and stopped. This caused the jam. I have a low hash rate and am
finding it hard to find a block. How did you lower the diff ?
Best
Greg
I did exactly what you are doing now. I was mining with some small miners too. As soon as I hit 1-2 blocks and I lowered the diff, prohashing entered and raised the diff again so I quit.
I think there are 3 options.
1. talk to them to exclude gcn from their switching policy
2. ban them from the network.
3. wait to see if gcn/doge rate drops so it won't be profitable for them to switch to gcn mining.
4. switch to POS
November 10, 2016, 03:45:56 PM
Hi Guys
The blockchain is still not sorted. We are working on it.
Best
Greg
Greg, I am sure prohashing pool is causing this trouble. It's a profit switching pool. When it detects a low hashrate and/or higher exchange rate, it switches to that coin, mines with very high hashrate and leaves the diff high. This is happening with another coin too. The blockchain is still not sorted. We are working on it.
Best
Greg
It took me 6 hours to lower the diff of that coin and within minutes they popped in and raised the diff.
Hi
You may be right. I'm not sure. I have two miners here working now so hopefully it will free up soon.
It seems they mined at a high hashrate and stopped. This caused the jam. I have a low hash rate and am
finding it hard to find a block. How did you lower the diff ?
Best
Greg
I did exactly what you are doing now. I was mining with some small miners too. As soon as I hit 1-2 blocks and I lowered the diff, prohashing entered and raised the diff again so I quit.
I think there are 3 options.
1. talk to them to exclude gcn from their switching policy
2. ban them from the network.
3. wait to see if gcn/doge rate drops so it won't be profitable for them to switch to gcn mining.
November 10, 2016, 01:57:01 PM
Hi Guys
The blockchain is still not sorted. We are working on it.
Best
Greg
Greg, I am sure prohashing pool is causing this trouble. It's a profit switching pool. When it detects a low hashrate and/or higher exchange rate, it switches to that coin, mines with very high hashrate and leaves the diff high. This is happening with another coin too. The blockchain is still not sorted. We are working on it.
Best
Greg
It took me 6 hours to lower the diff of that coin and within minutes they popped in and raised the diff.
Hi
You may be right. I'm not sure. I have two miners here working now so hopefully it will free up soon.
It seems they mined at a high hashrate and stopped. This caused the jam. I have a low hash rate and am
finding it hard to find a block. How did you lower the diff ?
Best
Greg
It is here ok
https://prohashing.com/help.html?topic=explorer-general
November 10, 2016, 01:46:12 PM
Hi Guys
The blockchain is still not sorted. We are working on it.
Best
Greg
Greg, I am sure prohashing pool is causing this trouble. It's a profit switching pool. When it detects a low hashrate and/or higher exchange rate, it switches to that coin, mines with very high hashrate and leaves the diff high. This is happening with another coin too. The blockchain is still not sorted. We are working on it.
Best
Greg
It took me 6 hours to lower the diff of that coin and within minutes they popped in and raised the diff.
Hi
You may be right. I'm not sure. I have two miners here working now so hopefully it will free up soon.
It seems they mined at a high hashrate and stopped. This caused the jam. I have a low hash rate and am
finding it hard to find a block. How did you lower the diff ?
Best
Greg
November 10, 2016, 06:02:26 AM
Hi Guys
The blockchain is still not sorted. We are working on it.
Best
Greg
Greg, I am sure prohashing pool is causing this trouble. It's a profit switching pool. When it detects a low hashrate and/or higher exchange rate, it switches to that coin, mines with very high hashrate and leaves the diff high. This is happening with another coin too. The blockchain is still not sorted. We are working on it.
Best
Greg
It took me 6 hours to lower the diff of that coin and within minutes they popped in and raised the diff.
November 10, 2016, 02:25:15 AM
Hi Guys
The blockchain is still not sorted. We are working on it.
Best
Greg
The blockchain is still not sorted. We are working on it.
Best
Greg
November 09, 2016, 02:17:18 PM
No I'm not using an emulater I'm using a tablet with a recording app. The withdraws did go through eventually after I had to try actually making them a few times. So the withdraw works kind of bit its not like you said it was its not fixed. Fixed means not broken.
I'm just irritated because there so many horrible coins coming out claiming to be this and that but never are and I dont really want gcoin to turn out that way either because it is a really good idea and the app itself works really well. Its just irritating when a game and I mean any game doesnt do what it is suppose to. That's the only problem I have.
I'm just irritated because there so many horrible coins coming out claiming to be this and that but never are and I dont really want gcoin to turn out that way either because it is a really good idea and the app itself works really well. Its just irritating when a game and I mean any game doesnt do what it is suppose to. That's the only problem I have.
Hi Jason XG,
You must also check the block explorer is up to date on the wallet.
(Check the menu top right in the Game wallet)
Also always do withdraw small amounts before you spend time playing just in case.
I've tested loads of times now and they seem fine.
Withdrawing is not instant, it can take a while waiting for the next block.
Anyway, send me your GCoin address and I will send you some for the inconvenience
Best
Greg
Cool thank you. The wallet and coin is doing a lot better. Can see trades picking up. Good job. Here is my address thanks very much.
GHxWfkmTJaKJUrdpNG4HJp39N9Kw5yxPHR
My wallet keeps saying syncing then it says syncing is stalled. Why ? Now the wallet doesn't even work -_-
Hi Jason,
I missed the note on the end there. Check again tomorrow and let me know
Best
Greg
November 09, 2016, 02:04:26 PM
Hi
We noticed the blocks aren't moving.
we've turned on our miners.
Should clear through today.
Best
Greg
We noticed the blocks aren't moving.
we've turned on our miners.
Should clear through today.
Best
Greg
seems no one is interesting in mining Gcoin,why don`t you switch it to POS?
This happens from time to time.
When powerful miners are off the smaller ones take over.
Best
Greg
November 09, 2016, 11:48:35 AM
Hi
We noticed the blocks aren't moving.
we've turned on our miners.
Should clear through today.
Best
Greg
We noticed the blocks aren't moving.
we've turned on our miners.
Should clear through today.
Best
Greg
seems no one is interesting in mining Gcoin,why don`t you switch it to POS?
November 09, 2016, 11:02:40 AM
Hi
We noticed the blocks aren't moving.
we've turned on our miners.
Should clear through today.
Best
Greg
We noticed the blocks aren't moving.
we've turned on our miners.
Should clear through today.
Best
Greg
November 07, 2016, 10:32:26 AM
No I'm not using an emulater I'm using a tablet with a recording app. The withdraws did go through eventually after I had to try actually making them a few times. So the withdraw works kind of bit its not like you said it was its not fixed. Fixed means not broken.
I'm just irritated because there so many horrible coins coming out claiming to be this and that but never are and I dont really want gcoin to turn out that way either because it is a really good idea and the app itself works really well. Its just irritating when a game and I mean any game doesnt do what it is suppose to. That's the only problem I have.
I'm just irritated because there so many horrible coins coming out claiming to be this and that but never are and I dont really want gcoin to turn out that way either because it is a really good idea and the app itself works really well. Its just irritating when a game and I mean any game doesnt do what it is suppose to. That's the only problem I have.
Hi Jason XG,
You must also check the block explorer is up to date on the wallet.
(Check the menu top right in the Game wallet)
Also always do withdraw small amounts before you spend time playing just in case.
I've tested loads of times now and they seem fine.
Withdrawing is not instant, it can take a while waiting for the next block.
Anyway, send me your GCoin address and I will send you some for the inconvenience
Best
Greg
Cool thank you. The wallet and coin is doing a lot better. Can see trades picking up. Good job. Here is my address thanks very much.
GHxWfkmTJaKJUrdpNG4HJp39N9Kw5yxPHR
My wallet keeps saying syncing then it says syncing is stalled. Why ? Now the wallet doesn't even work -_-
November 06, 2016, 09:45:39 AM
Greg, my order 1934 was placed 20 of October.
Worldofelectronics rules say one order per week.
Since order 1934 is not shipped yet, and two weeks have passed can I place a second order?
Thanks
Worldofelectronics rules say one order per week.
Since order 1934 is not shipped yet, and two weeks have passed can I place a second order?
Thanks
Hi,
I think you have an order shipping next week. I would wait until it gets there. I'm thinking
Friday.
Best
Greg
Oh, OK Greg. I expected to catch the deal of the day. Bad luck. Hahaha
Thanks
November 06, 2016, 08:35:31 AM
Greg, my order 1934 was placed 20 of October.
Worldofelectronics rules say one order per week.
Since order 1934 is not shipped yet, and two weeks have passed can I place a second order?
Thanks
Worldofelectronics rules say one order per week.
Since order 1934 is not shipped yet, and two weeks have passed can I place a second order?
Thanks
Hi,
I think you have an order shipping next week. I would wait until it gets there. I'm thinking
Friday.
Best
Greg
November 05, 2016, 06:59:50 PM
Greg, my order 1934 was placed 20 of October.
Worldofelectronics rules say one order per week.
Since order 1934 is not shipped yet, and two weeks have passed can I place a second order?
Thanks
Worldofelectronics rules say one order per week.
Since order 1934 is not shipped yet, and two weeks have passed can I place a second order?
Thanks
October 29, 2016, 08:09:40 AM
No I'm not using an emulater I'm using a tablet with a recording app. The withdraws did go through eventually after I had to try actually making them a few times. So the withdraw works kind of bit its not like you said it was its not fixed. Fixed means not broken.
I'm just irritated because there so many horrible coins coming out claiming to be this and that but never are and I dont really want gcoin to turn out that way either because it is a really good idea and the app itself works really well. Its just irritating when a game and I mean any game doesnt do what it is suppose to. That's the only problem I have.
I'm just irritated because there so many horrible coins coming out claiming to be this and that but never are and I dont really want gcoin to turn out that way either because it is a really good idea and the app itself works really well. Its just irritating when a game and I mean any game doesnt do what it is suppose to. That's the only problem I have.
Hi Jason XG,
You must also check the block explorer is up to date on the wallet.
(Check the menu top right in the Game wallet)
Also always do withdraw small amounts before you spend time playing just in case.
I've tested loads of times now and they seem fine.
Withdrawing is not instant, it can take a while waiting for the next block.
Anyway, send me your GCoin address and I will send you some for the inconvenience
Best
Greg
October 28, 2016, 06:04:09 PM
No I'm not using an emulater I'm using a tablet with a recording app. The withdraws did go through eventually after I had to try actually making them a few times. So the withdraw works kind of bit its not like you said it was its not fixed. Fixed means not broken.
I'm just irritated because there so many horrible coins coming out claiming to be this and that but never are and I dont really want gcoin to turn out that way either because it is a really good idea and the app itself works really well. Its just irritating when a game and I mean any game doesnt do what it is suppose to. That's the only problem I have.
I'm just irritated because there so many horrible coins coming out claiming to be this and that but never are and I dont really want gcoin to turn out that way either because it is a really good idea and the app itself works really well. Its just irritating when a game and I mean any game doesnt do what it is suppose to. That's the only problem I have.
Jump to: