x15 shows my gpu's going to 100c and fans to 9999 rpm. Idk why but it does.
for some reason on x15 my fans stay at idle no matter how hot the card gets (MSI 290) if I set fan speed manually in msi afterburner works ok and temps are normal
Topic: X11mod, X13mod, X15 and catalyst 14.7 RC - page 9. (Read 33791 times)
for some reason on x15 my fans stay at idle no matter how hot the card gets (MSI 290) if I set fan speed manually in msi afterburner works ok and temps are normal
Same experience only get 5 290 GPUs on a Asrock Bitcoin Board with 14.6.
Are you saying that new driver 14.6's card count limit is 5 cards?, that sucks!, damn!.
Well it fired up fine and was about 50% fastest but unstable since within the hour I lost the 6th card. Some weird error message in device manager, I rolled back the driver and still am getting better hash but not maxing it out man.
Same experience only get 5 290 GPUs on a Asrock Bitcoin Board with 14.6.
Are you saying that new driver 14.6's card count limit is 5 cards?, that sucks!, damn!.
Not working with my 6 GPU rigs unfortunately (only 4 GPUs are usable). The drivers will need to be modded if you have 5+ GPUs.
However, this *should* work, I haven't had a chance to try it yet:
https://litecointalk.org/index.php?topic=11761.msg185847#msg185847
However, this *should* work, I haven't had a chance to try it yet:
https://litecointalk.org/index.php?topic=11761.msg185847#msg185847
Quote
I attempted to follow along from the original post and made this for the "14.6-Beta-V1.0-Windows-May23" download that you can grab currently from AMD. I only made 2 .infs that replaced the two in \Packages\Drivers\Display\WB6A_INF.
I initially tried it without cleaning out the files and it failed. I would recommend following the OP's post on clearing out the files here: https://litecointalk.org/index.php?topic=11001.msg79830#msg79830
I installed the same way as suggested in that post. I installed with fewer than 3 cards installed at the time. Afterwards I hooked the rest of them up and finally had 6 cards (r9 270s on Windows 8.1) working. I needed the 14.6 drivers as this miner: https://bitcointalksearch.org/topic/ann-sgminer-with-x11x13nist5quarkanime-kernels-compatible-146-amd-drivers-658411 is optimized for them and now my r9 270s are hashing ~2.5-2.7 Mh/s on x11mod kernel.
Anyhow, try these at your own risk: http://www.filedropper.com/146modtest * fixed link
Cheers
I initially tried it without cleaning out the files and it failed. I would recommend following the OP's post on clearing out the files here: https://litecointalk.org/index.php?topic=11001.msg79830#msg79830
I installed the same way as suggested in that post. I installed with fewer than 3 cards installed at the time. Afterwards I hooked the rest of them up and finally had 6 cards (r9 270s on Windows 8.1) working. I needed the 14.6 drivers as this miner: https://bitcointalksearch.org/topic/ann-sgminer-with-x11x13nist5quarkanime-kernels-compatible-146-amd-drivers-658411 is optimized for them and now my r9 270s are hashing ~2.5-2.7 Mh/s on x11mod kernel.
Anyhow, try these at your own risk: http://www.filedropper.com/146modtest * fixed link
Cheers
Same experience only get 5 290 GPUs on a Asrock Bitcoin Board with 14.6.
x15 shows my gpu's going to 100c and fans to 9999 rpm. Idk why but it does.
WOW!is that driver showing you crap or really the card goes to 100C ? check temp physically and power consumption.
I will scare the shit outta me if I see 100C on one of my GPUs
what miner, bin, settings, driver, os,card are U using?
x15 shows my gpu's going to 100c and fans to 9999 rpm. Idk why but it does.
Sorry I don't have 7990 
My settings for X15 and X13 on the R9 280X and 7970s
sgminer.exe --algorithm bitblock -o POOL -u USER -p PASS -w 128 --lookup-gap 2 -I 18 -g 4 --gpu-powertune 0 --gpu-engine 1030 --gpu-memclock 1500 --gpu-fan 35-80 --temp-target 62 --temp-overheat 67 --temp-cutoff 74 --auto-fan
Getting about 2.7 in X13 and 2.0 in X15
Driver is 14.4 (gonna try 14.6 see if I can squeeze more)
sgminer 4.2.1
My settings for X15 and X13 on the R9 280X and 7970s
sgminer.exe --algorithm bitblock -o POOL -u USER -p PASS -w 128 --lookup-gap 2 -I 18 -g 4 --gpu-powertune 0 --gpu-engine 1030 --gpu-memclock 1500 --gpu-fan 35-80 --temp-target 62 --temp-overheat 67 --temp-cutoff 74 --auto-fan
Getting about 2.7 in X13 and 2.0 in X15
Driver is 14.4 (gonna try 14.6 see if I can squeeze more)
sgminer 4.2.1
Anyone suggest config settings for a 7990 x11/x13? Getting 6.2Mhs 60-61c underclocked to 1000, 1100mem, 1.065v, int 16, tc 22400
Currently testing X15 algo (bitblock), I'm getting around 2.2Mhs on a 7950 which is about 4x scrypt
I'm using SGminer beta 5. Windows 7 x64 (only tested with X15 so far)
https://mega.co.nz/#!9BYBCIpb!9u-UdMe9h3SV_6ifqTsCpI1PkTiXdBzLoxModwfbKb4
X15.bat
X15.conf
I'm using SGminer beta 5. Windows 7 x64 (only tested with X15 so far)
https://mega.co.nz/#!9BYBCIpb!9u-UdMe9h3SV_6ifqTsCpI1PkTiXdBzLoxModwfbKb4
X15.bat
Quote
@echo off
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe --pool-algorithm bitblock -c X15.conf
I have never used "profiles": [], before so I just put in pools sectionCOLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe --pool-algorithm bitblock -c X15.conf
X15.conf
Quote
{
"pools" : [
{
"quota" : "90;http://127.0.0.1:8889",
"user" : "blahblah",
"pass" : "blahblah",
"algorithm": "bitblock"
}
]
,
"profiles": [],
"intensity" : "20",
"worksize" : "256",
"algorithm": "bitblock",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "1792",
"gpu-threads" : "2",
"gpu-engine" : "1090",
"gpu-fan" : "30-100",
"auto-fan" : true,
"gpu-memclock" : "1300",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "64",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "60",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "59",
"tcp-keepalive" : "30",
"temp-hysteresis" : "2",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"quota" : "90;http://127.0.0.1:8889",
"user" : "blahblah",
"pass" : "blahblah",
"algorithm": "bitblock"
}
]
,
"profiles": [],
"intensity" : "20",
"worksize" : "256",
"algorithm": "bitblock",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "1792",
"gpu-threads" : "2",
"gpu-engine" : "1090",
"gpu-fan" : "30-100",
"auto-fan" : true,
"gpu-memclock" : "1300",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "64",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "60",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "59",
"tcp-keepalive" : "30",
"temp-hysteresis" : "2",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
Help!!!
Anyone have a 3 modified INF for the 14.6 RC2 yet for 5+ GPUs
Anyone have a 3 modified INF for the 14.6 RC2 yet for 5+ GPUs
Forgot to post this here aswell..
I'm running Windows 7 with the 14.4 v3 mod drivers, lasybear's miner (sgminer_x11x13mod_03_06_2014.zip), and Pencha's BIN file.
I have 6 GPUs per machine and get 3.7 m/hash per card @ 1080/1500.
EDIT: Forgot to mention this BIN file is for 7950 or 280X cards, haven't tried it with any others!
If you're on 14.4 drivers and don't want the hassle of going to 14.6, just download this guys BIN file (I had to modify the BIN filename from 8192 to 8191 as that's the TC I use). I've got a 20% boost overall:
https://bitcointalksearch.org/topic/m.7419294
If you're on 14.4 drivers and don't want the hassle of going to 14.6, just download this guys BIN file (I had to modify the BIN filename from 8192 to 8191 as that's the TC I use). I've got a 20% boost overall:
https://bitcointalksearch.org/topic/m.7419294
Quote
Delete that .bin created on 14.4 driver and copy this one. Its made on 14.6, 100% working Wink
https://www.dropbox.com/s/z2igfbzxeqrtly0/x11modTahitiglg2tc8192w256l4.bin
https://www.dropbox.com/s/z2igfbzxeqrtly0/x11modTahitiglg2tc8192w256l4.bin
I'm running Windows 7 with the 14.4 v3 mod drivers, lasybear's miner (sgminer_x11x13mod_03_06_2014.zip), and Pencha's BIN file.
I have 6 GPUs per machine and get 3.7 m/hash per card @ 1080/1500.
If anyone does come up with Modded INF for 14.6RC2 for 5+ cards let me know and I'll add link on OP.
Anyone have a modified INF for the 14.6 RC2 yet for 5+ GPUs???
Can't use the modified inf for the 14.6 may version.
Can't use the modified inf for the 14.6 may version.
I would like to know too.
Here's what I've got so far ... still tuning my config:
Powercolor R9280X ->> 4.1MHs WU .058 temp 62C-63C (volt-modded to 1.081V and heatsink paste done properly)
Powercolor HD7950 PCS+ ->> 3.6MHs WU .050 62C-63C (volt-modded to 1.100V and heatsink paste done properly)
Server 2008 R2 X64
catalyst 14.6 RC2
sgminer 4.1.0
Powercolor R9280X ->> 4.1MHs WU .058 temp 62C-63C (volt-modded to 1.081V and heatsink paste done properly)
Powercolor HD7950 PCS+ ->> 3.6MHs WU .050 62C-63C (volt-modded to 1.100V and heatsink paste done properly)
Server 2008 R2 X64
catalyst 14.6 RC2
sgminer 4.1.0
Quote
"intensity" : "16,18",
"worksize" : "256,256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "24576,24000",
"shaders" : "2048,1792",
"gpu-threads" : "4,4",
"gpu-engine" : "1050-1090,1065-1085",
"gpu-fan" : "30-100",
"auto-fan" : true,
"gpu-memclock" : "1720,1250",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "64",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "90",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "59",
"tcp-keepalive" : "30",
"temp-hysteresis" : "2",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"no-client-reconnect" : true,
"no-submit-stale" : false,
"load-balance" : true
"worksize" : "256,256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "24576,24000",
"shaders" : "2048,1792",
"gpu-threads" : "4,4",
"gpu-engine" : "1050-1090,1065-1085",
"gpu-fan" : "30-100",
"auto-fan" : true,
"gpu-memclock" : "1720,1250",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "64",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "90",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "59",
"tcp-keepalive" : "30",
"temp-hysteresis" : "2",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"no-client-reconnect" : true,
"no-submit-stale" : false,
"load-balance" : true
Anyone have a modified INF for the 14.6 RC2 yet for 5+ GPUs???
Can't use the modified inf for the 14.6 may version.
Can't use the modified inf for the 14.6 may version.
Windows 7 64-bit
14.6 RC2
sgminer w/ modded x11 kernel
1080/1500 on 7950s (0,1,2) --> 3.4x-3.5x Mh/s (was 2.8x)
1100/1250 on 7850 (3) --> 1.9x-2.x Mh/s (was 1.7x)
{
"pools" : [
{
"url" : "stratum+tcp://useast.wafflepool.com:3331",
"user" : "1KTN7vK3cx8D3Pjhsp5kRKPN7TWZHku52r",
"pass" : "d=0.02"
}
]
,
"device" : "0,1,2,3",
"intensity" : "16,16,16,16",
"worksize" : "256,256,256,256",
"kernel" : "x11mod,x11mod,x11mod,x11mod",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "8192,8192,8192,4096",
"gpu-threads" : "4,4,4,2",
"gpu-fan" : "40-85,40-85,40-85,40-85",
"temp-cutoff" : "95,95,95,80",
"temp-overheat" : "85,85,85,70",
"temp-target" : "72,72,72,60",
"api-listen" : true,
"api-mcast-port" : "4029",
"api-port" : "4029",
"auto-fan" : true,
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1"
}
14.6 RC2
sgminer w/ modded x11 kernel
1080/1500 on 7950s (0,1,2) --> 3.4x-3.5x Mh/s (was 2.8x)
1100/1250 on 7850 (3) --> 1.9x-2.x Mh/s (was 1.7x)
{
"pools" : [
{
"url" : "stratum+tcp://useast.wafflepool.com:3331",
"user" : "1KTN7vK3cx8D3Pjhsp5kRKPN7TWZHku52r",
"pass" : "d=0.02"
}
]
,
"device" : "0,1,2,3",
"intensity" : "16,16,16,16",
"worksize" : "256,256,256,256",
"kernel" : "x11mod,x11mod,x11mod,x11mod",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "8192,8192,8192,4096",
"gpu-threads" : "4,4,4,2",
"gpu-fan" : "40-85,40-85,40-85,40-85",
"temp-cutoff" : "95,95,95,80",
"temp-overheat" : "85,85,85,70",
"temp-target" : "72,72,72,60",
"api-listen" : true,
"api-mcast-port" : "4029",
"api-port" : "4029",
"auto-fan" : true,
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1"
}
Has anyone tried this with the optimized X13mod.cl?
Wafflepool is working on setting up a port for X13 ...
Wafflepool is working on setting up a port for X13 ...
Not seeing much of an improvement in hashrates with the optimized .cl file. Possibly more stable hash, but also likely placebo.
These rigs are all on Win8.1 using 13.12 (with the 14.6 openCL files inserted into folder) and the sgminer_14.6 (fixed) build from here: https://bitcointalksearch.org/topic/ann-sgminer-with-x11x13nist5quarkanime-kernels-compatible-146-amd-drivers-658411
7950s: ~3.5mhs @ 1050/1375
270s:~2.4mhs @ 1025/1500
280xs: ~4.2mhs @ 1100/1500
290s: ~4.6mhs @ 946/1260
You are missing the point of the OP ... simple upgrade to 14.6 RC2 and x11mod.cl from the link now works with sgminer 4.1.0 without have to do a lot of mucking about in patching up 14.6 beta original or creating yet another fork of sgminer to get it to work.These rigs are all on Win8.1 using 13.12 (with the 14.6 openCL files inserted into folder) and the sgminer_14.6 (fixed) build from here: https://bitcointalksearch.org/topic/ann-sgminer-with-x11x13nist5quarkanime-kernels-compatible-146-amd-drivers-658411
7950s: ~3.5mhs @ 1050/1375
270s:~2.4mhs @ 1025/1500
280xs: ~4.2mhs @ 1100/1500
290s: ~4.6mhs @ 946/1260
I don't want to be locked into a .bin provided that only works with whatever TC and WS it was compiled with.
I need to be able to compile my own working .bin from .cl to work on further tuning of config
Cheers
I found this update and tried to install the Catalyst 14.6 with the modified x11mod kernel. So far the hashrates increased a lot for my r9 280x cards.
XFX R9 280X now: 3.8 MH/s before: 3.1 MH/s
ASUS R9 280X DC2T now: 4.1 MH/s before 3.1 MH/s
XFX R9 270X now: 2.5 MH/s before 2MH/s
I don't have data for power consumtion right now.
All three cards in one rig is about 10.5 MH/s and seems to run stable at the moment. GPU Temps about 67° now; before the update about 65°
sgminer 4.1.0, win7 64bit
sgminer.conf
XFX R9 280X now: 3.8 MH/s before: 3.1 MH/s
ASUS R9 280X DC2T now: 4.1 MH/s before 3.1 MH/s
XFX R9 270X now: 2.5 MH/s before 2MH/s
I don't have data for power consumtion right now.
All three cards in one rig is about 10.5 MH/s and seems to run stable at the moment. GPU Temps about 67° now; before the update about 65°
sgminer 4.1.0, win7 64bit
sgminer.conf
Code:
"intensity" : "18,18,18",
"xintensity" : "0,0,0",
"rawintensity" : "0,0,0",
"worksize" : "128,128,128",
"kernel" : "x11mod,x11mod,x11mod",
"lookup-gap" : "0,0,0",
"thread-concurrency" : "22400,22400,14208",
"shaders" : "0,0,0",
"gpu-threads" : "4,4,4",
"gpu-engine" : "0-0,0-0,0-0",
"gpu-fan" : "0-65,0-65,0-75",
"gpu-memclock" : "0,0,0",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "0,0,0",
"gpu-vddc" : "0.000,0.000,0.000",
"temp-cutoff" : "95,95,95",
"temp-overheat" : "85,85,85",
"temp-target" : "75,75,75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "1",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
R9 270 (non x)
2.7 Mhs / each (6 gpu farm running 16.2 MHs)
Ubuntu 64bit
sgminer-sph ( https://github.com/djm34/sph-sgminer_x11mod )
AMD 14.6 drivers (beta)
*edit, not RC2 -- but posted as a reference/comparison
2.7 Mhs / each (6 gpu farm running 16.2 MHs)
Ubuntu 64bit
sgminer-sph ( https://github.com/djm34/sph-sgminer_x11mod )
AMD 14.6 drivers (beta)
*edit, not RC2 -- but posted as a reference/comparison
Code:
"kernel" : "x11mod",
"intensity" : "18",
"worksize" : "64",
"lookup-gap" : "2",
"thread-concurrency" : "8193",
"gpu-threads" : "2",
"gpu-engine" : "950-1115",
"gpu-fan" : "0-85,0-85,0-85,0-85,0-85,0-85",
"gpu-memclock" : "1485",
"gpu-powertune" : "20",
"temp-cutoff" : "88",
"temp-overheat" : "85",
"temp-target" : "63",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "30",
"failover-switch-delay" : "60",
"log" : "5",
"no-pool-disable" : true,
"queue" : "2",
"scan-time" : "30",
"shares" : "0",
"load-balance" : true,
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1"
}
Jump to: