I'm getting only rejected results on my laptop (i5 6300HQ + GTX 960M 4gb)
What's happening?
What's happening?
You have selected the wrong algo, for sure.
Topic: XMR-stak-JK 2.10.7 Compiled with no devfee (Updated: 2019-8-18) - page 13. (Read 28649 times)
You have selected the wrong algo, for sure.
I'm getting only rejected results on my laptop (i5 6300HQ + GTX 960M 4gb)
What's happening?
What's happening?
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Hello, the stellite will make a hardfork, could you add the support to it? would be sensational and so I would not have to leave that miner I think is very good!
https://github.com/stellitecoin/xtl-stak
https://github.com/stellitecoin/xtl-stak
source downloaded and compiled.
They give a .zip that says 2.4.4; but the code says its still 2.4.3; I updated it and hopefully it was a typo they forgot to update.
Give it a shot: Visit the XTL-stak thread here.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Version 2.4.4 is out, could you try to compile this?
Compiled.
Notes and link on first post. For version changes, see xmr-stak github page.
Hello, the stellite will make a hardfork, could you add the support to it? would be sensational and so I would not have to leave that miner I think is very good!
https://github.com/stellitecoin/xtl-stak
I am downloading the source now before I head home.https://github.com/stellitecoin/xtl-stak
Assuming it compiles the same as XMR stak; and the source is configured similarly, I should be able to easily change the devfee level and update the appropriate parts of the source and upload a binary later tonight; assuming I have time to try and compile once I get home.
Looks like I should be able to do that for you, and Ill post a note here with a link to the thread for XTL-stak when I get it compiled and uploaded.
Hello, the stellite will make a hardfork, could you add the support to it? would be sensational and so I would not have to leave that miner I think is very good!
https://github.com/stellitecoin/xtl-stak
https://github.com/stellitecoin/xtl-stak
Version 2.4.4 is out, could you try to compile this?
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Im getting errors about missing DLLs:
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
Yeah this is the same errors I got
Good luck JK!
Yep, ill keep you guys posted.
Turns out the binary was only partially built; if it ever tried to do anything with cuda/openCL, it would crash due to not being fully built. My mistake..... but it did mine just fine on my lenovo laptop with integrated graphics.
So, for now, ill only have the 2.4.2 release available. Gotta get the libraries working again.
Im getting errors about missing DLLs:
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
Yeah this is the same errors I got
Good luck JK!
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
No, msvc redis is a whole slurry of system dll files that don't belong in the program folder.....
This is why it's a system package from Microsoft....
When I finally make it home I'll try on 3 more machines to see if it's a singular fault, or if it's a universal fault to people without some msvc version installed.
*edit*
So it turns out I built as a debug release and it didn't build in the MSVC140 libraries into the executable like it did for earlier releases.
I am booting up the laptop with the compiler and attempting a final release recompile.
Stay tuned.
*edit again*
Gotta completely flush out all toolkits and compilers from my laptop, and try over again.
Very strange things are happening now. Im going to pull the release.
It worked fine on CPU only apparently. Something is miffed with the cuda and openCL integrations to the compiler for some reason. The released binary was only partially built; even though I can compile the solution for the binary by itself and get zero errors.
Hopefully Ill have more for you guys soon... but I need to get at a high speed internet link to do the reinstalls (again), and I have been working 10+ hour days at my day job... so Ill try to get on it shortly.
When I finally make it home I'll try on 3 more machines to see if it's a singular fault, or if it's a universal fault to people without some msvc version installed.
*edit*
So it turns out I built as a debug release and it didn't build in the MSVC140 libraries into the executable like it did for earlier releases.
I am booting up the laptop with the compiler and attempting a final release recompile.
Stay tuned.
*edit again*
Gotta completely flush out all toolkits and compilers from my laptop, and try over again.
Very strange things are happening now. Im going to pull the release.
It worked fine on CPU only apparently. Something is miffed with the cuda and openCL integrations to the compiler for some reason. The released binary was only partially built; even though I can compile the solution for the binary by itself and get zero errors.
Hopefully Ill have more for you guys soon... but I need to get at a high speed internet link to do the reinstalls (again), and I have been working 10+ hour days at my day job... so Ill try to get on it shortly.
It's definitely a msvc lib install needed
The redistributable should be included with the 2.4.2 release. If not, reply here and I'll upload it to mega for you guys to download...
The redistributable should be included with the 2.4.2 release. If not, reply here and I'll upload it to mega for you guys to download...
The 2.4.2 release works fine. But even if i use the dlls from the 2.4.2 release the 2.4.3 release doesnt work.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
It's definitely a msvc lib install needed
The redistributable should be included with the 2.4.2 release. If not, reply here and I'll upload it to mega for you guys to download...
The redistributable should be included with the 2.4.2 release. If not, reply here and I'll upload it to mega for you guys to download...
Im getting errors about missing DLLs:
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
I got something like this when I tried to compile XMrig, think it was missing a different dll, still working on it...
Im getting errors about missing DLLs:
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
VCRUNTIME140D.dll
ucrtbased.dll
MSVCP140D.dll
I have basically all MS VC++ redistributables installed (from 2005 thru 2017). But since there is a D in the end of the file, i have the suspicion that these are debug-dlls. Any idea?
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
I get some errors when I try to start this.. the normal dev fee release works fine though
Screenshots or detailed list of the problem may help me resolve your issue.It ran perfectly fine on my Lenovo laptop...
I get some errors when I try to start this.. the normal dev fee release works fine though
We shall see soon enough. I'm still waiting for Electronero MainNet to be released. Should be today, 30 May around 9am GMT according to their website. Thanks for getting this out just in time. I appreciate all your hard work JK. Glad you're feelin better. Happy Mining!
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Success.
See first post; Version 2.4.3 is now compiled and available.
Tested on my laptop with the CPU; but no reason to believe there is any problems with cuda/openCL.
Enjoy guys.
See first post; Version 2.4.3 is now compiled and available.
Tested on my laptop with the CPU; but no reason to believe there is any problems with cuda/openCL.
Enjoy guys.
Hi,
Does your last version supports the last fork of Electroneum?
Thanks for doing this!
yep, looks like electronium is supported. give it a try.
Ive only tested with CN7 myself, but this should be exactly the same as the github precompile, aside from the zero devfee change and dev pool address change to localhost (127.0.0.1). If theres an error in electronium; it must exist in the main precompile found on github as well.
Success.
See first post; Version 2.4.3 is now compiled and available.
Tested on my laptop with the CPU; but no reason to believe there is any problems with cuda/openCL.
Enjoy guys.
See first post; Version 2.4.3 is now compiled and available.
Tested on my laptop with the CPU; but no reason to believe there is any problems with cuda/openCL.
Enjoy guys.
Hi,
Does your last version supports the last fork of Electroneum?
Thanks for doing this!
Thanks for the release 
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
Success.
See first post; Version 2.4.3 is now compiled and available.
Tested on my laptop with the CPU; but no reason to believe there is any problems with cuda/openCL.
Enjoy guys.
See first post; Version 2.4.3 is now compiled and available.
Tested on my laptop with the CPU; but no reason to believe there is any problems with cuda/openCL.
Enjoy guys.
Jump to: