Somebody, please, make a working 64 bit binary file.
Are you using Linux or Windows?//DeaDTerra
Topic: [XPM] Working on a GPU miner for Primecoin, new thread :) - page 18. (Read 166591 times)
//DeaDTerra
Somebody, please, make a working 64 bit binary file.
Are you using Linux or Windows? 
Somebody, please, make a working 64 bit binary file.
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
Same problem. Any suggestions about how can I fix it?OS? 32-bit or 64-bit? It might be that 64-bit is broken right now.
I'm having trouble compiling from windows... I'll install Ubuntu to try it.
I should have been more specific: I think there's a problem if you compile it yourself on 64-bit Linux. The supplied Windows binary is 32-bit.
Ubuntu 12.04 + x86_64, AMD GPUs -- works for me. No blocks yet, but it looks busy and the numbers are sane.
I should have been more specific: I think there's a problem if you compile it yourself on 64-bit Linux. The supplied Windows binary is 32-bit.
DeaDTerra also uses win7 x64
Ok, so the problem isn't there.. I'm mining on win7 x64 just fine.
I should have been more specific: I think there's a problem if you compile it yourself on 64-bit Linux. The supplied Windows binary is 32-bit.
DeaDTerra also uses win7 x64
I should have been more specific: I think there's a problem if you compile it yourself on 64-bit Linux. The supplied Windows binary is 32-bit.
Ubuntu 12.04 + x86_64, AMD GPUs -- works for me. No blocks yet, but it looks busy and the numbers are sane.
I should have been more specific: I think there's a problem if you compile it yourself on 64-bit Linux. The supplied Windows binary is 32-bit.
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
I have gotten the program to work for roughly 30-45 sec then it crashes.
I have 2x7990 and I am running all 4 cores.
I have the latest drivers and I run on windows 7 64 bits.
I have the following settings
host 127.0.0.1
port 9332
user username
pass password
protocol primecoin
worksize 256
aggression 16
sievepercentage 10
sievesize 1000000
primecoin_address AbJSsYd5cnj2MxmBEHxtWo8kwpt7qA77xM
debug false
opencldebug false
cpu_mining_threads 4
use_gpu true
use_gpu_fermat_test true
getwork_rate 1000
Any suggestions on how to fix it?
//DeaDTerra
I have gotten the program to work for roughly 30-45 sec then it crashes.
I have 2x7990 and I am running all 4 cores.
I have the latest drivers and I run on windows 7 64 bits.
I have the following settings
host 127.0.0.1
port 9332
user username
pass password
protocol primecoin
worksize 256
aggression 16
sievepercentage 10
sievesize 1000000
primecoin_address AbJSsYd5cnj2MxmBEHxtWo8kwpt7qA77xM
debug false
opencldebug false
cpu_mining_threads 4
use_gpu true
use_gpu_fermat_test true
getwork_rate 1000
Any suggestions on how to fix it?
//DeaDTerra
Set the "cpu_mining_threads" to 8 and the "getwork rate" to 4000
Okay, I will try that out
//DeaDTerra
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
Same problem. Any suggestions about how can I fix it?OS? 32-bit or 64-bit? It might be that 64-bit is broken right now.
//DeaDTerra
Both of my rigs are using win x64, and it works, so probably not the x64 is the problem. Maybe its gpu specific. Both of my rigs are cypress based, but you are using tahiti gpus.
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
I have gotten the program to work for roughly 30-45 sec then it crashes.
I have 2x7990 and I am running all 4 cores.
I have the latest drivers and I run on windows 7 64 bits.
I have the following settings
host 127.0.0.1
port 9332
user username
pass password
protocol primecoin
worksize 256
aggression 16
sievepercentage 10
sievesize 1000000
primecoin_address AbJSsYd5cnj2MxmBEHxtWo8kwpt7qA77xM
debug false
opencldebug false
cpu_mining_threads 4
use_gpu true
use_gpu_fermat_test true
getwork_rate 1000
Any suggestions on how to fix it?
//DeaDTerra
I have gotten the program to work for roughly 30-45 sec then it crashes.
I have 2x7990 and I am running all 4 cores.
I have the latest drivers and I run on windows 7 64 bits.
I have the following settings
host 127.0.0.1
port 9332
user username
pass password
protocol primecoin
worksize 256
aggression 16
sievepercentage 10
sievesize 1000000
primecoin_address AbJSsYd5cnj2MxmBEHxtWo8kwpt7qA77xM
debug false
opencldebug false
cpu_mining_threads 4
use_gpu true
use_gpu_fermat_test true
getwork_rate 1000
Any suggestions on how to fix it?
//DeaDTerra
Set the "cpu_mining_threads" to 8 and the "getwork rate" to 4000
//DeaDTerra
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
I have gotten the program to work for roughly 30-45 sec then it crashes.
I have 2x7990 and I am running all 4 cores.
I have the latest drivers and I run on windows 7 64 bits.
I have the following settings
host 127.0.0.1
port 9332
user username
pass password
protocol primecoin
worksize 256
aggression 16
sievepercentage 10
sievesize 1000000
primecoin_address AbJSsYd5cnj2MxmBEHxtWo8kwpt7qA77xM
debug false
opencldebug false
cpu_mining_threads 4
use_gpu true
use_gpu_fermat_test true
getwork_rate 1000
Any suggestions on how to fix it?
//DeaDTerra
I have gotten the program to work for roughly 30-45 sec then it crashes.
I have 2x7990 and I am running all 4 cores.
I have the latest drivers and I run on windows 7 64 bits.
I have the following settings
host 127.0.0.1
port 9332
user username
pass password
protocol primecoin
worksize 256
aggression 16
sievepercentage 10
sievesize 1000000
primecoin_address AbJSsYd5cnj2MxmBEHxtWo8kwpt7qA77xM
debug false
opencldebug false
cpu_mining_threads 4
use_gpu true
use_gpu_fermat_test true
getwork_rate 1000
Any suggestions on how to fix it?
//DeaDTerra
Set the "cpu_mining_threads" to 8 and the "getwork rate" to 4000
Okay, I will try that out
//DeaDTerra
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
Same problem. Any suggestions about how can I fix it?OS? 32-bit or 64-bit? It might be that 64-bit is broken right now.
//DeaDTerra
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
Same problem. Any suggestions about how can I fix it?OS? 32-bit or 64-bit? It might be that 64-bit is broken right now.
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
I have gotten the program to work for roughly 30-45 sec then it crashes.
I have 2x7990 and I am running all 4 cores.
I have the latest drivers and I run on windows 7 64 bits.
I have the following settings
host 127.0.0.1
port 9332
user username
pass password
protocol primecoin
worksize 256
aggression 16
sievepercentage 10
sievesize 1000000
primecoin_address AbJSsYd5cnj2MxmBEHxtWo8kwpt7qA77xM
debug false
opencldebug false
cpu_mining_threads 4
use_gpu true
use_gpu_fermat_test true
getwork_rate 1000
Any suggestions on how to fix it?
//DeaDTerra
I have gotten the program to work for roughly 30-45 sec then it crashes.
I have 2x7990 and I am running all 4 cores.
I have the latest drivers and I run on windows 7 64 bits.
I have the following settings
host 127.0.0.1
port 9332
user username
pass password
protocol primecoin
worksize 256
aggression 16
sievepercentage 10
sievesize 1000000
primecoin_address AbJSsYd5cnj2MxmBEHxtWo8kwpt7qA77xM
debug false
opencldebug false
cpu_mining_threads 4
use_gpu true
use_gpu_fermat_test true
getwork_rate 1000
Any suggestions on how to fix it?
//DeaDTerra
Set the "cpu_mining_threads" to 8 and the "getwork rate" to 4000
I can't turn the fermat test off because then it crashes straight on start and I get fraction assserts error.
Same problem. Any suggestions about how can I fix it? I'm getting "The procedure entry point clEnqueueFillBuffer could not be located in the dynamic link library" and crash. Win8 x64 & GTX 560
You need to upgrade your amd/nvidia drivers to fix that one, but it will probably still crash after that.
Same here on Win8 x64 Nvidia C2075. The driver was updated in July and should support openCL 1.1
You assume clEnqueueFillBuffer works in OCL 1.1
It seems clEnqueueFillBuffer indeed requires OpenCL 1.2. I could do without it but it's kind of a pain in the ass. Nvidia doesn't have drivers that support OpenCL 1.2?
Ahhhh so this is why it crashes on OSX 10.8, which ships with OpenCL 1.1 and there is no newer driver available.
According to Wikipedia, when OS X 10.9 Mavericks ships this Fall, OpenCL 1.2 and OpenGL 4.1 will be built in.
Can anyone post their generation rates? Like how fast is it hitting chains?
I have it running just fine, however my gandalfs are far lower on the beta 2 version. Anyone finding the same?
I redownload the miner. same, crashed on Window8 64bit. How did you make it work?
I have it running just fine, however my gandalfs are far lower on the beta 2 version. Anyone finding the same?
I'm getting "The procedure entry point clEnqueueFillBuffer could not be located in the dynamic link library" and crash. Win8 x64 & GTX 560
You need to upgrade your amd/nvidia drivers to fix that one, but it will probably still crash after that.
Same here on Win8 x64 Nvidia C2075. The driver was updated in July and should support openCL 1.1
You assume clEnqueueFillBuffer works in OCL 1.1
It seems clEnqueueFillBuffer indeed requires OpenCL 1.2. I could do without it but it's kind of a pain in the ass. Nvidia doesn't have drivers that support OpenCL 1.2?
Nvidia seems to only support OpenCL1.2 on one or two models to some extend. http://foldingforum.org/viewtopic.php?f=80&t=24747
Jump to: