[XPM]unofficial jhPrimeminer thread - page 9.

ssl303

newbie

Activity: 46

Merit: 0

Quote from: ssl303 on November 16, 2013, 10:21:45 AM

I'm not sure if -xpm option is working or not.
I have connected three computers to my server using -xpm option.
jhprimeminer -o http://server.address:9912 -u username -p password -m 61 -target 9 -bttarget 9 -xpm coinaddress
Total pps is around 79000 all together. I ran for a week, but never found a block.
Also, when I used to pool mine, I'd see something like it found some chains once in a while, but I never seen that message since soloing.
Can someone look into this?

Actually it worked! I just needed to wait for the 3,000 confirmations. Awesome!

ssl303

newbie

Activity: 46

Merit: 0

Quote from: bitcoin_builder on November 18, 2013, 12:42:33 AM

Are you running it on Windows or Linux?
If Windows then which version?
Because I was using it on 64 bit Windows until the crash of ypool and now it doesn't work even with -xpt option. I even tried this -xpm option but no luck.

Both windows 64-bit and Linux 64-bit using wine.
I use the latest version from the dropbox link from previous post.

bitcoin_builder

newbie

Activity: 23

Merit: 0

Quote from: ssl303 on November 16, 2013, 10:21:45 AM

I'm not sure if -xpm option is working or not.
I have connected three computers to my server using -xpm option.
jhprimeminer -o http://server.address:9912 -u username -p password -m 61 -target 9 -bttarget 9 -xpm coinaddress
Total pps is around 79000 all together. I ran for a week, but never found a block.
Also, when I used to pool mine, I'd see something like it found some chains once in a while, but I never seen that message since soloing.
Can someone look into this?

Are you running it on Windows or Linux?
If Windows then which version?
Because I was using it on 64 bit Windows until the crash of ypool and now it doesn't work even with -xpt option. I even tried this -xpm option but no luck.

ssl303

newbie

Activity: 46

Merit: 0

Is there way to run it in background on Windows?

ssl303

newbie

Activity: 46

Merit: 0

I'm not sure if -xpm option is working or not.
I have connected three computers to my server using -xpm option.
jhprimeminer -o http://server.address:9912 -u username -p password -m 61 -target 9 -bttarget 9 -xpm coinaddress
Total pps is around 79000 all together. I ran for a week, but never found a block.
Also, when I used to pool mine, I'd see something like it found some chains once in a while, but I never seen that message since soloing.
Can someone look into this?

digit

legendary

Activity: 1672

Merit: 1010

Are there any optimized 32bit versions?

bitcoin_builder

newbie

Activity: 23

Merit: 0

Quote from: mindragon on November 14, 2013, 12:05:17 PM

Ypool's server is down due to hardware failure. ETA 12 hours from now for repair.

I am using jhPrimeminer on 64 bit machine and it was working fine until the crash of ypool.net
Now as per their instruction I am connecting to port 8081 with option "-xpt" but the program says "-xpt is an unknown option.

How to make it work?

mindragon

full member

Activity: 173

Merit: 100

Ypool's server is down due to hardware failure. ETA 12 hours from now for repair.

Gundamcoin

newbie

Activity: 24

Merit: 0

today ypool went down briefly and the miner was still running

so there wasn't a connection and it was trying to reconnect, but still running and a few shares found but lost, said shares were not accepted by server or something like that.

so i was wondering if I could make it so that it stops mining but tries to reconnect, seems a waste to use the power and gain nothing. or were those shares found right as it lost connection?

aerocloud t13 beta, running 6 core of amd 8320

btw, what does type mean, type:1/ type:3

ssl303

newbie

Activity: 46

Merit: 0

Can someone explain what all the numbers mean in the output?
11/12/13-14:06:18 - New Block: 257984 - Diff: 9.976105 / 9.976105
Best/Max diff: [ 9.491845 / 0.000000 ]
6ch/h: 82.33 - 917 [ 278 / 273 / 366 ]
7ch/h: 9.16 - 102 [ 41 / 24 / 37 ]
8ch/h: 1.08 - 12 [ 4 / 2 / 6 ]
9ch/h: 0.09 - 1 [ 1 / 0 / 0 ]
MNPS:452.38 PPS:35426 WPS:17.673 ACC:2004
Current Primorial: 61 - Sieve Size: 1651500 - Prime Count: 46834
So many numbers! Which number determines how fast I'd find a block?
The prime coin mining calculator asks for chain per day. How would I find that number from these?

Guergana

newbie

Activity: 3

Merit: 0

since what time is XPM side and server down?

Transcend

newbie

Activity: 17

Merit: 0

jhPrimeMiner.exe -o http://ypool.net:10034 -u workername -p workerpass -m 61 -target 9 -bttarget 9

Is best for an I5 processor.

What settings would be best for an q6600 or q6700 or q9450.

Thx in advance.

ssl303

newbie

Activity: 46

Merit: 0

Never mind, I forgot to add the client to the allow host. Sorry about that.

ssl303

newbie

Activity: 46

Merit: 0

I can't get -xpm option to work. Here is what I get.
Connecting to 'X.X.X.X' (X.X.X.X)
Using 8 threads
Username: XXX
Password: XXX
Using GetBlockTemplate protocol
UpdateWork(GetBlockTemplate) failed.
I use primecoin-0.1.2-hp11 on ubuntu.
Client is jhPrimeminer_RdBBeta4.0F2_x64-AVX.

hak8or

full member

Activity: 172

Merit: 100

Quote from: rdebourbon on November 09, 2013, 04:04:42 AM

Quote from: hak8or on November 07, 2013, 03:40:52 PM

So are these good speeds for an I5-3570k running at stock? What measures should I be using to compare to see if I am doing a bad job or not? Anywhere I can look to compare various processors, for example mine vs an FX8350?

Looks pretty decent to me.. Only change I would consider is a higher primorial.. Your cpu is more than capable of dealing with the higher numbers at a good rate.. Try add -m 61 to your commandline

Thanks, will do so!

balanghai

sr. member

Activity: 364

Merit: 253

Is there hope for the GPU miner?

belltown

sr. member

Activity: 301

Merit: 250

still can't change my profile pic

Let me answer my own question.

YPool is back. Just in time when breeeer went down;) The site has totally new design. But https is broken. So you need to go to http://ypool.net to see the new site, not https://ypool.net

belltown

sr. member

Activity: 301

Merit: 250

still can't change my profile pic

Any news about what's go in on with ypool? Front end is down for days now...

ssl303

newbie

Activity: 46

Merit: 0

rdebourbon, can your jhprimeminer be compiled in Ubuntu directly?
If so, what are the dependencies and where can I get the latest source? The latest source on the git is in September.

ssl303

newbie

Activity: 46

Merit: 0

Quote from: rdebourbon on November 09, 2013, 04:00:51 AM

Yes, actually.. This is on the cards.. tandy now has write access to my repository on github, so I expect that as we go forward the two forks will merge into one..

That would be amazing! can't wait!!! Do you have any estimate on how soon they would merge? Few days, weeks, months?

Topic: [XPM]unofficial jhPrimeminer thread - page 9. (Read 180221 times)