Topic: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! - page 54. (Read 1514749 times)

For memorial ;

In 2016 one solo miner in this pool found 1 block via a machine with 1.5Th power , at that point bitcoin net diff was over than 100G ( in last 2016 net diff was more than 130G )

With 1.5TH/S ( near 300 share/s and lower than 200k share on standard bitcoin time ) nobody able to pass 100G diff ( 100G*0xFFFFFFFF GH meaning that machine must do hounded years to reach net diff at that point ! How he/she/it passed this ammount of share under 10 minutes ??!! ).


This mean he dont mine any thing 3 years ago ... may that was a mistake with attempt to users explaining about pass net difficulty or may show that many bitcoin miners dont know exactly what is mining terms and conditions.
Net difficulty is parameter to show system work stat not mean every block found mandatory rolled ntime*ndiff .
( If you think in solo mining you must do over than netdiff share i dont understand why you are here ?!!! All this pool hash rate not exist 1/100000 th this moment diff and with your mind you cant pass it never )

I wait for colvin , he may able to clear this matter and explain what happened for that 2 example machines ...

Go back and find out for yourself.  It's all in the Bitcoin blockchain.

All blocks found by this pool have met or exceeded the Bitcoin Network Difficulty at the time they were found.  That's the definition of finding a block.

Altcoins don't need to meet or exceed Bitcoin Difficulty, only their own difficulty.

Please educate yourself on mining.

If your machine found a block on CK solo it would have been broadcast to the network right now the difficulty is at

Bitcoin Difficulty:    6,379,265,451,411   meaning your best share on your miners GUI should be a number like this but checking the address you posted it seems your best share is still only:

"bestshare":593881802.880121,

You can always look at the template the pool is sending your miners to check what they are mining you would need to do tcp dump. 
but I can assure you that you did not find a bitcoin block because if you did we would all be back to diff 0 for the next round and you would have coins in your  3F8kvsy8fcBqTsxKLtouVk5JGVVqM99HAy  address.

In screen shots you can see 3 stratum adresses.
(Bitmain standard panel )

Adress pariority 0 mandatory incorrect for machine mine on next pool pariority,mean solo ck pool

On 3th address you can see zergpool sha256 address and digibyte coin for backup mining .( And with attemp to digibyte diff over 500M  it not possible any one get one 80k work and found 3 to 7 blocks in 1 first test work !!! I realy dont understand users explain about you may found blocks from 1 get work without machine do any process on first block , first conection to stratum protocol used for check something not do job )

About mine altcoins with 3th pool it not possible when 2th pool alive ,

As same you can see that on 3th pool we haven't any accepted or rejected share on the antminer stat page ( diff a = 0, diff r = 0 mean ; machine dont do any job for 3th pool )

3th pool in starting machine only get 1 work for checking connection is alive or dead .( All asic machines do this for check their 3 fields connections )

Then story of ; it may be that theses two example machines mine altcoin from another pool totaly false

These machines get all work from solo ckpool .
All accepted shares was from solo ckpool .
All rejected share again was from solo ck .


About : you must have share over than net diff to find a block i dont understand why ?!!!

Many times on another coins i found blocks with share 1/1000 to 1/100000 network diff ( i had some antminer 7s that in solo they found blocks of coins with over 400M diff
 and machines dashboard show we had maximum best 2 to 5 m share !

As anyone know mining on solo format is same lottory .

There in no guaranted you when you have x ammount of share you must find any thing and when your share is less than x ammount you never found any thing !

Go and check founded block in solo for this pool users in last and show me solo block founders had shares equal or more than net difficulty !

You cant find thing .

It would seem you must have rolled over to your fail-over pools and solved blocks there.
CK Pool and CK solo are both highly trusted pools they do not mine S**t coins or merged mine for that matter.

My thoughts would be you solved a block with one of your fail-over pools.

It's happened to me in the past when I have had machines set to roll over to nicehash or MMR.

I've mined here for years and still no jackpot

Actually I wish he had shown full and perfect screenshots.

I don’t understand how the blocks show up.

I know when I point to nicehash I get lots of blocks which I know show due to hitting little crappy off coins.

I think the problem here is the screen shots are choppy.

He certainly did not hit a btc block so it was an off coin showing up.

I know ckpool does not mine off coins.

I have pointed huge amounts of hash here and I have hit three blocks here.  All were btc blocks.

I never showed a little bs block of alt coin which those screen shots are showing.

I don’t think he faked the shots but they are not full shots so they are effectively a waste of time.

If you have solo.ckpool first and nicehash second

And you drop your solo.ckpool connection it rolls over to nicehash you could hit two,or three bs blocks and it could then re connect to solo pool.  It would then show 2,3,4 blocks hit and mining on solo.ckpool

But in reality they would have been bs altcoin blocks hit at nicehash.

According to your displayed btc-adress,
http://solo.ckpool.org/users/3F8kvsy8fcBqTsxKLtouVk5JGVVqM99HAy

{
 "hashrate1m": "0",
 "hashrate5m": "0",
 "hashrate1hr": "6.13G",
 "hashrate1d": "1.85T",
 "hashrate7d": "1.16T",
 "lastshare": 1562506154,
 "workers": 0,
 "shares": 1247843211,
 "bestshare": 593881802.880121,
 "bestever": 593881802,
 "worker": [
  {
   "workername": "3F8kvsy8fcBqTsxKLtouVk5JGVVqM99HAy",
   "hashrate1m": "0",
   "hashrate5m": "0",
   "hashrate1hr": "6.13G",
   "hashrate1d": "1.85T",
   "hashrate7d": "1.16T",
   "lastshare": 1562506154,
   "shares": 973223211,
   "bestshare": 593881802.880121,
   "bestever": 593881802
  }
 ]
}

So the DIFF. is => 7934713219630
your bestshare:             593881802

good morning

Your best share is no where near the share needed for a BTC block.  Maybe you found a block on another pool you have listed.  But you DID NOT find a BTC block.

So whater that zergpool crap coin pool you have in there is possibly what is registering your found blocks.
because your bestever share for BTC is not quite there.
so id advise of taking out that zerg from your miner configuration, to not confuse yourself

Thank you for your answer ,

About bitmain foundblock i had this question years ago and for giving my answer i do many tests on some antminer devices with mining many sha 256 coins with lower difficulty for long time ( ex.joule coin , emark and etc ) in solo .

On system stat you can see one pool addresse for do these tests in last.

I never see any fake or incorrect foundblock in conventional solo mining ,

Some cases having foundblock whithout mined original coin that after i check pool dashboard shown that pool doing merged mining and these blocks that miner show found realy founded from machine side , but the founded blocks was not blocks of mining main coin .
They mined for merged coin from pool side .

I dont think ckpool doing merged mining or maybe doing this without inform pool users .


Again i looking for clear and technical answer that why ckpool get solved block from our machines but these blocks not appear anywhere.
[/quote]

... You only found a Block when your Bestshare - hits 7,934,713,219,630 +
just copy and past your miner stats from ck pool here.

like this:
"hashrate1m": "92.1G",
 "hashrate5m": "70.9G",
 "hashrate1hr": "253G",
 "hashrate1d": "309G",
 "hashrate7d": "371G",
 "lastshare": 1562516611,
 "workers": 1,
 "shares": 631192036,
 "bestshare": 3742319396.025044,    <---- This is what counts. Nothing else -matters-
 "bestever": 3742319396,

So you have an S9.  How many?  Just one?  If so the chances that you have found several Bitcoin blocks is very small.

Are you mining through a proxy service such as Nicehash?  If so you can never be sure of which pool you are actually mining through, so somebody could be renting your hash on an altcoin and you could be seeing those blocks found.  Also as another person has pointed out, Bitmains hack of CGMiner may report incorrect block finds.

Thank you for your answer ,

About bitmain foundblock i had this question years ago and for giving my answer i do many tests on some antminer devices with mining many sha 256 coins with lower difficulty for long time ( ex.joule coin , emark and etc ) in solo .

On system stat you can see one pool addresse for do these tests in last.

I never see any fake or incorrect foundblock in conventional solo mining ,

Some cases having foundblock whithout mined original coin that after i check pool dashboard shown that pool doing merged mining and these blocks that miner show found realy founded from machine side , but the founded blocks was not blocks of mining main coin .
They mined for merged coin from pool side .

I dont think ckpool doing merged mining or maybe doing this without inform pool users .


Again i looking for clear and technical answer that why ckpool get solved block from our machines but these blocks not appear anywhere.

Last block found on Solo CK was March 9th. This is public information you can find in BTC.com pools stats.

Difficulty is now around 7.93 Trillion so your best share needs to be that much to solve a block.

Antminer GUI has a "FoundBlocks" window on the summary page that I have no clue how it gets activated but is known to NOT be a block found counter, if you are going by that, write Bitmain so they can explain, or maybe someone here can Illuminate us in what that box actually is?

No I don't see your screen shots.  I DO NOT click on untrusted links. - Try posting the actual text instead of a screen shot graphic.

Again what is your hash rate that has enabled you to "find some blocks"?

What type of ASIC mining hardware are you using?

How many hundreds of these machines do you have to enable you to find some blocks at this high difficulty?

Do you see screen shots ?

If you wants i able to give you original shots with time stamp

Edith : i think you answer my asked questions with my questions !

I asked when my miners conected to this pool in solo and their stats show these miners found blocks no thing happened !

You ask me how many and how much hashrates of my miners ?!

You think i have one usb miner with 50Gh/s

When pool accept my shares it means pool accept my hardwares work , when sysyem stat show n block found it means hashes that pool got to my hardware was solved with target hash ,

I realy dont understand that when mining is an accidental and chances work why you sitting and calculating with this pool hashrate it must mine n block in n days ?!

I think you dont know exact mining foundation , mining play on Probabilities condations , there isnt any guarantee that when you have x ammount of hashrate you will solve x ammount of blocks in x ammount of time !

Over than 70% of asic mining equipments play on under 15ths , each 3 to over than 45 minuts ( it must 10 minutes on paper in reality it varies with many factors ) one of them may found 1 block .

Its not predicted wich devices may found next block we only know one of them may do that.


And my questions presist as start ; why this pool show that my equipments found blocks , my equipments are standard equipments , they are bitmain antminer s9 with standard firmware

Examples

http://uupload.ir/files/bday_screenshot_2019-07-06-01-38-25-198_com.android.chrome.png


http://uupload.ir/files/2hp1_screenshot_2019-07-06-01-38-22-208_com.android.chrome.png


http://uupload.ir/files/4ays_screenshot_2019-07-06-01-38-13-658_com.android.chrome.png


http://uupload.ir/files/t7o2_screenshot_2019-06-27-11-08-46-250_com.android.chrome.png

Found some blocks?

How many blocks have you found?

How many hundreds of Petahash's of ASIC Miners do you have hashing at this pool that would have enabled you to "Find some Blocks"?

Edit: this pools total hash rate is under 2 Petahash.  That is less than two blocks a year.  So even *IF* this pools hashrate was entirely your miners it would be impossible for you to have found some blocks, as in more than one.

Hi brothers,

In last days some my miners that conected to solo ck pool find some blocks ,

I captured miners status , but after these days i see that no any btc transfered to my address , as same no any btc mined stamp with ck pool in last month !

Why this happened and why when my miners status show mined blocks with this pool and no any thing happened after weeks , months and years we must trust to this pool ?

If any mistake presist it was from pool side and mean we waste many time , resources , electricity , bandwith and equipment with this pool ,

Otherwise why this pool give us untrustabl blocks info and hashes for do our machines mining ?

I will upload my miners status with their blocks found in this pool for proof of all things.

1) you don't need normaly an open port, you initiate the connection
2) Is the Time set in debian (gui) or can you check on console by typing 'date' to see if the Time is set in linux, or use a ntp sever.

Hello again,

At my Windows Computer i use F-secure.
Which Ports do i need to Open for CKPool ?
I tried 3333 but wasn't working- only if i deactivate the Firewall - but thats not a option....


second question;

On my Debian8 Computer cg miner shows th date ; 1970-01-01 11:32:15.252   - i googled a lot but didn't find an answer to corrrect it. Does affect anything, or just look stupid? cgminer is v.4.11.1

Thanks !