█▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 64.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: tbearhere on July 07, 2016, 06:35:25 AM

Quote from: induktor on July 06, 2016, 10:09:24 PM

Quote from: tbearhere on July 06, 2016, 06:23:33 PM

Quote from: induktor on July 06, 2016, 08:45:48 AM

Quote from: tbearhere on July 06, 2016, 05:08:56 AM

Could someone with a gigabyte 970gtx g1 please tell me their core clock frequently at no oc'ing while mining. thx
Mine says 1413 core no oc'ing while mining when it should be 1117 ghz.

1177 here in all my cards (Gigabyte 970 G1)
(using driver 352.63, cuda 7.5, lubuntu 14.04)
this is, non-OCed, standard clocks, TPL lowered to 130W

Thx do you have 4 or more in your rig? I forgot to ask. thx

Three per rig (4 rigs), using a very low power motherboard with only three PCI-E (Gigabyte AM1M-S2H) Best setup price-performance-power consumption i could find, the processor is a AM1 5350 (quad core, 25W max TDP).

I followed your thread about your issue with that 1 card that does not wanna come down from the tree (high clock), if it is the same revision and FRU you could try flash the bios from one of the other cards, kinda risky because in nvidia there is no bios switch, but in theory they are all dual bioses right?. (of course download the original bios (backup) first, just in case), not sure if it will fix it but there is a very good chance IMHO.

Ok thank you much appreciated induktor that means I have 2 970gtx g1 gigabyte that are bad. Did an rma on one and got the same thing.
Clocks are at 1413 ghz p2 state mining no oc'ing and cant get the 2nd card to mine without crashing.
But I have 2 980to 1 750ti and 1 970gtx gigabyte i cant get the 970 to mine at 1117 ghz or the 2nd one added to the rig mines at 1423 ghz on that one. no oc'ing. should try another rma. I don't understand why.
They have dual bios.
EDIT: Flashing the cards not sure how to do it.

TECH POWER-UP GPU-Z--

You can use GPU-Z to make a copy of your factory GPU BIOS. Do that first. Then NVFLASH on a DOS boot USB stick will allow you to flash a new BIOS to the card in a DOS environment. There is an article on CryptoMining-Blog that explains how to edit the card BIOS with Kepler BIOS Tweaker for better performance; do a search there (22 AUG 14). Make sure to keep a copy of your original BIOS. This is black voodoo, be careful. --scryptr

Megaquake

hero member

Activity: 630

Merit: 506

the Canada eCoin Scrypt disappeared wow Huh

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: induktor on July 06, 2016, 10:09:24 PM

Quote from: tbearhere on July 06, 2016, 06:23:33 PM

Quote from: induktor on July 06, 2016, 08:45:48 AM

Quote from: tbearhere on July 06, 2016, 05:08:56 AM

Could someone with a gigabyte 970gtx g1 please tell me their core clock frequently at no oc'ing while mining. thx
Mine says 1413 core no oc'ing while mining when it should be 1117 ghz.

1177 here in all my cards (Gigabyte 970 G1)
(using driver 352.63, cuda 7.5, lubuntu 14.04)
this is, non-OCed, standard clocks, TPL lowered to 130W

Thx do you have 4 or more in your rig? I forgot to ask. thx

Three per rig (4 rigs), using a very low power motherboard with only three PCI-E (Gigabyte AM1M-S2H) Best setup price-performance-power consumption i could find, the processor is a AM1 5350 (quad core, 25W max TDP).

I followed your thread about your issue with that 1 card that does not wanna come down from the tree (high clock), if it is the same revision and FRU you could try flash the bios from one of the other cards, kinda risky because in nvidia there is no bios switch, but in theory they are all dual bioses right?. (of course download the original bios (backup) first, just in case), not sure if it will fix it but there is a very good chance IMHO.

Ok thank you much appreciated induktor that means I have 2 970gtx g1 gigabyte that are bad. Did an rma on one and got the same thing.
Clocks are at 1413 ghz p2 state mining no oc'ing and cant get the 2nd card to mine without crashing.
But I have 2 980to 1 750ti and 1 970gtx gigabyte i cant get the 970 to mine at 1117 ghz or the 2nd one added to the rig mines at 1423 ghz on that one. no oc'ing. should try another rma. I don't understand why.
They have dual bios.
EDIT: Flashing the cards not sure how to do it.

mtx_demon

full member

Activity: 273

Merit: 100

Quote from: restless on July 07, 2016, 02:14:50 AM

Which miner is currently best for neoscrypt? I mean of these available for free

For Nvidia ccminer
and for ATI sgminer

Look around for the best version for your GPU

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Supported by MCAP:

Digibyte ($ 2,310,867)
Auroracoin ($ 1,359,608)
Myriadcoin ($ 527,532 )

etc

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

Quote from: ?? on ??

i'm still sure skeincoin should be removed from zpool completely

Zpool.ca is mining 6 skein algo coins and the pool hashrate is 21GHASH

Aurora (skein)   2.5 AUR   1.155 k   325 665   3 mins   7.3 Gh/s   0.0106
Myriad (skein)   500 MYR   668.565   1 716 787   116 secs      0.0091
Digibyte (skein)   997.016 DGB   1.207 k   2 678 131   3 mins   17.3 Gh/s   0.0086
Skein (skein)   4 SKC   1.231   916 521   0 sec      0.0038
Xedos (skein)   10 XDC   1.038   871 351   0 sec      0.0037
Rich (skein)   4 RICHX   63.04   293 423   11 secs      0.0031

restless

legendary

Activity: 1151

Merit: 1001

Which miner is currently best for neoscrypt? I mean of these available for free

Megaquake

hero member

Activity: 630

Merit: 506

Long block just to get an orphan Roll Eyes

Yo coin eats all the hash for hours

Mining 52 coins at 7.6 Gh/s

Yo (scrypt)   50 YOC   3.181 k   43 396   29 mins   7.6 Gh/s   0.1372

Last 50 Blocks (scrypt)
Name   Amount   Difficulty   Block   Time   Status
Yo (scrypt)   50 YOC   2.14 k   43 352   25m ago   Orphan

induktor

hero member

Activity: 710

Merit: 502

Quote from: tbearhere on July 06, 2016, 06:23:33 PM

Quote from: induktor on July 06, 2016, 08:45:48 AM

Quote from: tbearhere on July 06, 2016, 05:08:56 AM

Could someone with a gigabyte 970gtx g1 please tell me their core clock frequently at no oc'ing while mining. thx
Mine says 1413 core no oc'ing while mining when it should be 1117 ghz.

1177 here in all my cards (Gigabyte 970 G1)
(using driver 352.63, cuda 7.5, lubuntu 14.04)
this is, non-OCed, standard clocks, TPL lowered to 130W

Thx do you have 4 or more in your rig? I forgot to ask. thx

Three per rig (4 rigs), using a very low power motherboard with only three PCI-E (Gigabyte AM1M-S2H) Best setup price-performance-power consumption i could find, the processor is a AM1 5350 (quad core, 25W max TDP).

I followed your thread about your issue with that 1 card that does not wanna come down from the tree (high clock), if it is the same revision and FRU you could try flash the bios from one of the other cards, kinda risky because in nvidia there is no bios switch, but in theory they are all dual bioses right?. (of course download the original bios (backup) first, just in case), not sure if it will fix it but there is a very good chance IMHO.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: induktor on July 06, 2016, 08:45:48 AM

Quote from: tbearhere on July 06, 2016, 05:08:56 AM

Could someone with a gigabyte 970gtx g1 please tell me their core clock frequently at no oc'ing while mining. thx
Mine says 1413 core no oc'ing while mining when it should be 1117 ghz.

1177 here in all my cards (Gigabyte 970 G1)
(using driver 352.63, cuda 7.5, lubuntu 14.04)
this is, non-OCed, standard clocks, TPL lowered to 130W

Thx do you have 4 or more in your rig? I forgot to ask. thx

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Hey crackfoo:

Tried the SHA256 port again last night... Didn't stay connected long at all.... After multiple reboots too.

Just trying to get it back online here at 2:00PST, it kept being kicked off after only a few seconds... Gave up. Pointing elsewhere.

Very strange that my S3's when I had them wouldn't feel this issue near as much. I wonder if the S5's do it slightly more but less than the S7....

JarBinks

full member

Activity: 144

Merit: 100

Quote from: mtx_demon on July 06, 2016, 11:35:48 AM

Hi

I would like to know how works the exchange rate?
I would like just o mine one coin is it possible?
Because I am getting paid the most in another coin that I don't wanna and also the exchange rate it's way low compare to bittrex so in the end no profit.
Are guys working together with nicehash? looks like their bots are pointing their orders to you guys as well so the profit goes even more away :-(
But really nice away to keep some coins alive

I cant speak for others but depending on what algo you are talking about, NH can be a significant part of the hashing power on zpool.
Depending on the prices on each site, I regularly contribute to zpool from NH on the smaller algo's.
Though my contribution tends to be very spiky, since the prices on zpool and NH are constantly changing.

On NH whoever sets up the order determines where the hashing power is applied and there is no default site, like zpool, where the hash goes.
If there are no orders on NH the algo becomes unavailable to be mined, I have seen this happen when NH adds a new algo or an algo is about to be discontinued.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: mtx_demon on July 06, 2016, 11:35:48 AM

Hi

I would like to know how works the exchange rate?
I would like just o mine one coin is it possible?
Because I am getting paid the most in another coin that I don't wanna and also the exchange rate it's way low compare to bittrex so in the end no profit.
Are guys working together with nicehash? looks like their bots are pointing their orders to you guys as well so the profit goes even more away :-(
But really nice away to keep some coins alive

CHECK THE LIST OF COINS BEING MINED--

Then pick one for your payment coin. Select an algorithm that is paying well, and that you can mine with a high hash rate. You will be paid in the coin of your choice, but be sure to select a coin that is normally in surplus supply.

To answer your question more directly, you cannot mine just a single coin; instead a miner mines an algorithm, and gets paid in a coin of his choice. Even if the chosen payment coin is from a different algorithm. the miner gets paid in that coin as long as it is in supply.

A pool that mines single coins without exchange is yiimp.ccminer.org, and it is run by the author/maintainer of the YIIMP pool software, tpruvot. There are several coins there that can be mined for good profit if you have the right rig. Give-Me-Coins.com is a good pool for getting paid in what you mine. The pool has several merge-mined coins and you get all of the coins that you mine. --scryptr

mtx_demon

full member

Activity: 273

Merit: 100

Hi

I would like to know how works the exchange rate?
I would like just o mine one coin is it possible?
Because I am getting paid the most in another coin that I don't wanna and also the exchange rate it's way low compare to bittrex so in the end no profit.
Are guys working together with nicehash? looks like their bots are pointing their orders to you guys as well so the profit goes even more away :-(
But really nice away to keep some coins alive

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: induktor on July 06, 2016, 10:19:03 AM

Quote from: crackfoo on July 06, 2016, 09:07:56 AM

Quote from: induktor on July 06, 2016, 08:51:05 AM

Hello, any ideas why there was no payouts?, last payment received was 24 hours ago, and I am mining ETH at 250MH, I am pretty sure that I should have received something by now.
thanks

There is no ETH on my pool... so maybe that's why??

I am an idiot.
I deserve it! Grin

WRONG POOL, what an A hole I am! fuck!

I have rigs with your pool but mining other coins obviously hehe.
sorry 4 that, my bad!. Grin

i need to slow down hehe

haha no worries. Happen to all of us.

induktor

hero member

Activity: 710

Merit: 502

Quote from: crackfoo on July 06, 2016, 09:07:56 AM

Quote from: induktor on July 06, 2016, 08:51:05 AM

Hello, any ideas why there was no payouts?, last payment received was 24 hours ago, and I am mining ETH at 250MH, I am pretty sure that I should have received something by now.
thanks

There is no ETH on my pool... so maybe that's why??

I am an idiot.
I deserve it! Grin

WRONG POOL, what an A hole I am! fuck!

I have rigs with your pool but mining other coins obviously hehe.
sorry 4 that, my bad!. Grin

i need to slow down hehe

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: Epsylon3 on July 06, 2016, 09:17:39 AM

Quote from: scryptr on July 06, 2016, 05:52:52 AM

Quote from: jkminkov on July 06, 2016, 05:05:01 AM

Quote from: scryptr on July 04, 2016, 11:42:59 AM

Quote from: tbearhere on July 04, 2016, 11:14:23 AM

To add an unlisted algo I still don't know what you mean.

ON THE MINERCONTROL THREAD OPENING PAGE--

One of the contributors noted that "algos not in this list are not supported". This refers to the algos in the posted configurration file. Perhaps it is on KBomba's GitHub page, I'll check later. I think it refers to algos NOT in the NiceHash API set. I only added algos to the Zpool set of algos (Zpool is a YAAMP clone) because of this reasoning. Some of the API information downloading may be hard-coded, so that only NiceHash algos current as of release 1.6.5.1 are completely supported. I reason that the YAAMP API will allow the addition of algos that are available at Zpool, but not at NiceHash.

Thank you for the hint on the "usewindow" command. I will try it later.

--scryptr

you can add newer algos on NH, just use for reference https://www.nicehash.com/index.jsp?p=api

example for MC : { "algo": "Blake256r8vnl", "priceid": "18",

can you help me with identifying, are those on zpool, what algo are on ccminer/sgminer?

15 = ScryptJaneNf16
16 = Blake256r8
17 = Blake256r14
18 = Blake256r8vnl

NUMBER 17 MAY BE BLAKECOIN--

NiceHash is AMD-centric, and uses SGminer syntax. Zpool does not offer the algos numbered 15, 16, or 18 currently. If you are running SGminer, no problem, if you are running CCminer, try mining number 17 with "-a blakecoin" in the command line and point it at NiceHash. --scryptr

18 is easy, vnl = zcash => "vanilla" algo

but blakecoin is 8 round also, so it should be 16 "blakecoin" in ccminer, the difference with vanilla is only the stratum protocol (same difference as whirlcoin/whirlpool)

17 should be SFR one "blake" in ccminer

THANK YOU! --

I puzzled through your CCminer help file but muffed the answer. --scryptr

Topic: █▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 64. (Read 217685 times)