█▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 88.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: Megaquake on May 20, 2016, 05:57:18 AM

Quote from: crackfoo on May 20, 2016, 04:40:20 AM

Quote from: Megaquake on May 20, 2016, 02:04:06 AM

I just stopped mining SHA256 with address 1eVaQWLK @ 3:00am eastern time this morning and the reason I did is it hasn't shown hashrate or gains at the pool for several hours, I have lost some BTC, can you check on that please?

approximately 9 hours average of 15ths missing!

for now, can you try changing btc addresses? Had one other report of the same thing and that seemed to work, but not finding much on this side. Still looking into it.

Yes I changed the address its working

Thanks for the update.

I have a record of the hash sent also

Looks like the latest changes made introduced a bug where BTC addresses <34 chars in length are reported as invalid and therefore not logging shares.

If you can, please switch to an address with 34 characters.

tbearhere

legendary

Activity: 3164

Merit: 1003

My skein hash not being reported.
Let me know when its corrected.
Its out of my conf file for now geese............

Funny thing is where is my hash going?

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: crackfoo on May 20, 2016, 06:36:08 AM

Quote from: tbearhere on May 20, 2016, 06:07:25 AM

DIGIBYTE DGB add under skein algo too.

It already is....

Great I haven't noticed becase I'm working on conf files.

Thx
I'm going to add those other algo's in that where giving me trouble and divide my hashrate by 1000.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: tbearhere on May 20, 2016, 06:07:25 AM

DIGIBYTE DGB add under skein algo too.

It already is....

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: crackfoo on May 18, 2016, 01:09:32 PM

Any algo requests? besides ETH & Vanilla

Please please get the pool auto difficulty adjustor working like nicehash has......... please Crackfoo.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: crackfoo on May 18, 2016, 01:28:10 PM

Quote from: AngryDwarf on May 18, 2016, 01:23:40 PM

Quote from: crackfoo on May 18, 2016, 01:09:32 PM

Any algo requests? besides ETH & Vanilla

More coins could be added to skein

What about axiom, scryptjane?

what skein ones? XDC and SKC?

OK

DIGIBYTE DGB add under skein algo too.

Megaquake

hero member

Activity: 630

Merit: 506

Quote from: crackfoo on May 20, 2016, 04:40:20 AM

Quote from: Megaquake on May 20, 2016, 02:04:06 AM

I just stopped mining SHA256 with address 1eVaQWLK @ 3:00am eastern time this morning and the reason I did is it hasn't shown hashrate or gains at the pool for several hours, I have lost some BTC, can you check on that please?

approximately 9 hours average of 15ths missing!

for now, can you try changing btc addresses? Had one other report of the same thing and that seemed to work, but not finding much on this side. Still looking into it.

Yes I changed the address its working

Thanks for the update.

I have a record of the hash sent also

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: Megaquake on May 20, 2016, 02:04:06 AM

I just stopped mining SHA256 with address 1eVaQWLK @ 3:00am eastern time this morning and the reason I did is it hasn't shown hashrate or gains at the pool for several hours, I have lost some BTC, can you check on that please?

approximately 9 hours average of 15ths missing!

for now, can you try changing btc addresses? Had one other report of the same thing and that seemed to work, but not finding much on this side. Still looking into it.

jkminkov

hero member

Activity: 698

Merit: 500

Quote from: AngryDwarf on May 19, 2016, 05:01:29 AM

I've noticed skein tends to concentrate hash on the most profitable coin, whereas myr-gr seems to spread hashes across all coins (where we only seem to solve low diff blocks on a regular basis). What is the difference in set up here?

SKC looks like an abandoned coin, see https://bitcointalksearch.org/topic/m.14070923

pool puts lots of MH/s on the network with unknown total hashrate and it produces lots of orphans, there is a mitigation plan to avoid that like it does on myr-gr port

pool with 190Mh/s on 3,1Mh/s total network at the moment, crackfoo probably should restart daemon or pause/remove it as it is a waste of hashrate atm...

Megaquake

hero member

Activity: 630

Merit: 506

I just stopped mining SHA256 with address 1eVaQWLK @ 3:00am eastern time this morning and the reason I did is it hasn't shown hashrate or gains at the pool for several hours, I have lost some BTC, can you check on that please?

approximately 9 hours average of 15ths missing!

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: AngryDwarf on May 17, 2016, 03:38:21 PM

1. If decred is specified in the password string, e.g decred=602, without the d=nnnn it appears to be setting difficulty to 602 !

This should be fixed now.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: AngryDwarf on May 17, 2016, 03:38:21 PM

Been trying to setup a config without specifying d=nnnn in the password field to let the stratum adjust the difficulty. I've found some major issues:

1. If decred is specified in the password string, e.g decred=602, without the d=nnnn it appears to be setting difficulty to 602 !
2. Decred and blakecoin algos, I've never seen a share submission below 1.000, yet the stratum starts at 0.5. This leads to poor reported hash rate and poor returns.

On a minor note, it seems stratum ups difficulty quite quickly, but doesn't drop difficulty very quickly.

So back to manually setting the difficulty in the password field (which I didn't want to do to try and keep the password string length down).

Anyone else experienced this?

Yes I have severe difficulty fluctuations .... the pool most definitely needs a difficulty adjuster like nicehash has plz add that Crackfoo. Thx

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: AngryDwarf on May 19, 2016, 05:01:29 AM

I've noticed skein tends to concentrate hash on the most profitable coin, whereas myr-gr seems to spread hashes across all coins (where we only seem to solve low diff blocks on a regular basis). What is the difference in set up here?

I think it's because the diff gaps are much greater. There's nothing different to control that between algos.

AngryDwarf

sr. member

Activity: 476

Merit: 501

Quote

By default, zpool will adjust the difficulty of your miner automatically over time until you have from 5 to 15 submits per minute. It's a good trade off between bandwidth and accuracy.

Does this still hold true? Since decred=602 was setting my difficulty, I want to manually specify and optimise the difficulty settings again. I've noticed the stratum is terrible at dropping difficulty even when far less than 5/min for an extended period of time. Also, a lucky run easily pushes the stratum difficulty up. What is the recommended share submission rate over an extended period now? (not too worried about bandwidth, but its probably the load on your database server which I should be thinking of!) I think when I last looked at the code, there seemed to be some sort of algo wide PPLNS system of payment, so hopefully it is not necessary to get a bite on every coin. How long is that PPLNS time setting?

AngryDwarf

sr. member

Activity: 476

Merit: 501

I've noticed skein tends to concentrate hash on the most profitable coin, whereas myr-gr seems to spread hashes across all coins (where we only seem to solve low diff blocks on a regular basis). What is the difference in set up here?

AngryDwarf

sr. member

Activity: 476

Merit: 501

Quote from: justz777 on May 18, 2016, 08:05:41 PM

i used the ccminer off the zpool benchmarks page and i also had to install cuda toolkit 7.5 to get the stats going on win 7 64 bit with that gtx 950....

Hadn't noticed the preview builds there. You might find the 32-bit cuda 6.5 one is faster on most algos.

Not sure if we will get a password length increase. Got the usual enamouring response.

stefin

newbie

Activity: 46

Merit: 0

Now XNG payouts are ok. @zpool can you check and the AND ARTvB28os3vzJfNbqRQtf5EYC9qcA88K7T
Thanks!

2bacco

full member

Activity: 196

Merit: 100

The Smoker Friendly Coin 2BACCO

Please Add 2bacco coin at your mining pool

2bacco main thread at bitcointalk.org
https://bitcointalksearch.org/topic/ann-2bacco-coin-crowdfund-upgrading-to-pospow-scrypt-smoker-friendly-1096693

2bacco home page
http://www.2bacco.com

justz777

newbie

Activity: 11

Merit: 0

i used the ccminer off the zpool benchmarks page and i also had to install cuda toolkit 7.5 to get the stats going on win 7 64 bit with that gtx 950....

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: bigs21024 on May 18, 2016, 04:04:22 PM

Quote from: bigs21024 on May 17, 2016, 03:29:26 PM

@zpool can you look at my addy i mined with P8ra7krMFUu6PcaUneqy5SGrWhRXCUxR7Z and shows 35 unpaid tkn and 15VC5AijNxnmBW3Txnt616pS539GWzQRbq which shows 0.00089993 BTC which neither i have gotten thanks

anything on this i did not get payment

https://bitcointalksearch.org/topic/m.14870691

Topic: █▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 88. (Read 217686 times)