Topic: █▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 94. (Read 217686 times)
May 10, 2016, 05:03:42 PM
Rented hash SHA256 0.0028 btc/th from NH the last week lost 0.15322 BTC when done
May 10, 2016, 01:15:07 PM
Can you update the ADZ logo to this please
Cheers
Cheers
May 10, 2016, 11:04:54 AM
in theory it should be possible to regenerate a merkle with a different extranonce yes... please share if you do it 
May 10, 2016, 11:02:07 AM
also getting a lot of "nonces already sent" using tpruvot ccminer and blake2s... anyone?
its not a pool problem, its the algo which is too fast
Ok but is there a way to avoid the issue? Extranonce maybe?
May 10, 2016, 10:16:08 AM
also getting a lot of "nonces already sent" using tpruvot ccminer and blake2s... anyone?
its not a pool problem, its the algo which is too fast
May 10, 2016, 10:04:51 AM
also getting a lot of "nonces already sent" using tpruvot ccminer and blake2s... anyone?
Let me check with him and see.
May 10, 2016, 10:04:11 AM
trying the x17 port, looks fine but no blocks found, even though TTF is 6 mins only.
Yeah, looking into why they're not being added automatically. I think it's just a delays in the block updates, since... well we have a lot of coins and blocks being found.
May 10, 2016, 09:07:50 AM
also getting a lot of "nonces already sent" using tpruvot ccminer and blake2s... anyone?
May 10, 2016, 09:00:29 AM
trying the x17 port, looks fine but no blocks found, even though TTF is 6 mins only.
May 10, 2016, 07:13:52 AM
Wow.. Quick Service!
Thanks
Thanks
May 10, 2016, 07:11:16 AM
Is DECRED not being mined right now? My rate has gone to 0 and it is not showing in the list of mined algo's via web.
-Rog
-Rog
Seems the wallet crashed overnight. Restarted now.
May 10, 2016, 07:00:16 AM
Is DECRED not being mined right now? My rate has gone to 0 and it is not showing in the list of mined algo's via web.
-Rog
-Rog
May 08, 2016, 09:23:27 PM
Thanks guys... I wanted to test out the Claymore miner and now I can connect and it appears to work. However the performance hit to my Eth mining is pretty significant. I will have to see if there is a way to tweak it somewhat to not make such an impact on the Eth mining. So for now I have back off and just using the Claymore for eth until I can see what I can do to split a smaller portion of my mining off for Decred. Thanks for the fast reply.
Just fool around with your decred intensity. If you don't have the variable set up in your command line it's -dcri x where x is best set to a value in the range of 20-65. For bigger cards like 290 or 390 it seems to work best around 45-65. For smaller cards like 380/280 probably tone it down a bit to 25-50 and so on and so forth for the even smaller cards.
on my 390s, I set dcri to 60 and skip ethi settings.
Result: 873-874 MHs per card (DCR) and 29.xx MHs (ETH)
Have you crunched numbers to see if you're getting the right payouts?
I was complaining about my share % of a block not being proportional to the amount of decred I was being credited. Now those numbers line up perfectly, but my share % and miner hashrate to pool's hashrate are off. Wtf? It's almost like someone is changing different variables in the pool's code so that miners are shorted. Too weird.
there some kinks in the web frontend but as long as shares are submitted, the rewards will come. It will come slow than usual because DCR has a long confirmation and long block period.
My other algos like X14 and Argon2, have weird numbers on the pool frontend too but my payouts are about consistent with comparison to other pools.
May 08, 2016, 08:57:19 PM
Thanks guys... I wanted to test out the Claymore miner and now I can connect and it appears to work. However the performance hit to my Eth mining is pretty significant. I will have to see if there is a way to tweak it somewhat to not make such an impact on the Eth mining. So for now I have back off and just using the Claymore for eth until I can see what I can do to split a smaller portion of my mining off for Decred. Thanks for the fast reply.
Just fool around with your decred intensity. If you don't have the variable set up in your command line it's -dcri x where x is best set to a value in the range of 20-65. For bigger cards like 290 or 390 it seems to work best around 45-65. For smaller cards like 380/280 probably tone it down a bit to 25-50 and so on and so forth for the even smaller cards.
on my 390s, I set dcri to 60 and skip ethi settings.
Result: 873-874 MHs per card (DCR) and 29.xx MHs (ETH)
Have you crunched numbers to see if you're getting the right payouts?
I was complaining about my share % of a block not being proportional to the amount of decred I was being credited. Now those numbers line up perfectly, but my share % and miner hashrate to pool's hashrate are off. Wtf? It's almost like someone is changing different variables in the pool's code so that miners are shorted. Too weird.
May 08, 2016, 08:19:58 PM
Thanks guys... I wanted to test out the Claymore miner and now I can connect and it appears to work. However the performance hit to my Eth mining is pretty significant. I will have to see if there is a way to tweak it somewhat to not make such an impact on the Eth mining. So for now I have back off and just using the Claymore for eth until I can see what I can do to split a smaller portion of my mining off for Decred. Thanks for the fast reply.
Just fool around with your decred intensity. If you don't have the variable set up in your command line it's -dcri x where x is best set to a value in the range of 20-65. For bigger cards like 290 or 390 it seems to work best around 45-65. For smaller cards like 380/280 probably tone it down a bit to 25-50 and so on and so forth for the even smaller cards.
on my 390s, I set dcri to 60 and skip ethi settings.
Result: 873-874 MHs per card (DCR) and 29.xx MHs (ETH)
May 08, 2016, 07:30:04 PM
Thanks guys... I wanted to test out the Claymore miner and now I can connect and it appears to work. However the performance hit to my Eth mining is pretty significant. I will have to see if there is a way to tweak it somewhat to not make such an impact on the Eth mining. So for now I have back off and just using the Claymore for eth until I can see what I can do to split a smaller portion of my mining off for Decred. Thanks for the fast reply.
Just fool around with your decred intensity. If you don't have the variable set up in your command line it's -dcri x where x is best set to a value in the range of 20-65. For bigger cards like 290 or 390 it seems to work best around 45-65. For smaller cards like 380/280 probably tone it down a bit to 25-50 and so on and so forth for the even smaller cards.
May 08, 2016, 07:14:50 PM
Thanks guys... I wanted to test out the Claymore miner and now I can connect and it appears to work. However the performance hit to my Eth mining is pretty significant. I will have to see if there is a way to tweak it somewhat to not make such an impact on the Eth mining. So for now I have back off and just using the Claymore for eth until I can see what I can do to split a smaller portion of my mining off for Decred. Thanks for the fast reply.
May 08, 2016, 06:38:30 PM
Has anyone had any luck getting the Claymore miner to work for decred on zpool? If you have can you provide the syntax for the startup? Thanks!
-dpool stratum+tcp://mine.zpool.ca:5744 -dwal BITCOINADDRESS -dpsw c=BTC,decred
=)
May 08, 2016, 03:18:26 PM
Has anyone had any luck getting the Claymore miner to work for decred on zpool? If you have can you provide the syntax for the startup? Thanks!
May 08, 2016, 03:00:21 PM
I tried to mine decred.
But i get : stratum+tcp://mine.zpool.ca:5744 not responding !
Is something wrong with the pool ?
Or do i have a issue with cgminer ?
This is the command line i use :
cgminer.exe --blake256 -o stratum+tcp://mine.zpool.ca:5744 -u 1BZv8NwcXFwHZtX3wtkNiD3jaF1y59Ewjz -p d=2
But i get : stratum+tcp://mine.zpool.ca:5744 not responding !
Is something wrong with the pool ?
Or do i have a issue with cgminer ?
This is the command line i use :
cgminer.exe --blake256 -o stratum+tcp://mine.zpool.ca:5744 -u 1BZv8NwcXFwHZtX3wtkNiD3jaF1y59Ewjz -p d=2
you are trying to run the blake256 algo on the decred port.... see below. Make sure your miner supports decred and your video card.
cgminer.exe --decred -o stratum+tcp://mine.zpool.ca:5744 -u 1BZv8NwcXFwHZtX3wtkNiD3jaF1y59Ewjz -p c=BTC,d=2,decred
I tried this command line.
But cgminer shuts down after 1 second.
Is --decred correct ?
Because on the site of decred.
They say that they are using blake 256 !
[/quote]
Yes, but you still need a version of ccminer that has the decred version of the blake256 algo added to it. There are several. Check cryptomining blog.
Jump to: