Pages:
Author

Topic: 0.96.4 RC1 - page 2. (Read 14283 times)

newbie
Activity: 28
Merit: 0
December 27, 2017, 05:12:10 PM
So I installed this version of Armory in order to get the BCH signer so I could claim my BCH, but when I start Armory it just sits at "Preparing Databases" and nothing happens. I can't see my BTC balance and it says that Armory is offline in the bottom right corner.

The CPU is idling and no disk or wifi is being used, so I'm fairly confident it doesn't actually do anything. What can be the problem and what can I do to solve it?

EDIT: I first tried to install 0.96.3 but had the exact same problem.

EDIT2: I'm also using bitcoin core 0.13.1, should I update?

EDIT3: Looking at the logs, this is what is says:
"Log file opened at 23:30:55.000: C:\Users\Bla\AppData\Roaming/Armory/dbLog.txt
-INFO  - 23:30:55.000: (..\main.cpp:32) Running on 8 threads
-INFO  - 23:30:55.000: (..\main.cpp:33) Ram usage level: 50
-INFO  - 23:30:55.000: (c:\users\goat\code\armory3\cppforswig\BDM_Server.h:263) Listening on port 9001
-ERROR - 23:30:55.016: (..\BDM_Server.cpp:1270) There is already a process listening on 127.0.0.1:9001
-ERROR - 23:30:55.016: (..\BDM_Server.cpp:1272) ArmoryDB cannot start under these conditions. Shutting down!
-ERROR - 23:30:55.016: (..\BDM_Server.cpp:1273) Make sure to shutdown the conflicting processbefore trying again (most likely another ArmoryDB instance)."
sr. member
Activity: 525
Merit: 282
December 26, 2017, 11:48:07 AM
Ok, thanks showing me the way. The instructions didn't work for me, after searching  https://brew.sh/index_nl.html  worked well. I had also to replace armory to another map, then it worked! Pjieuw! Grin

Many txs! Wink

What do you mean they didn't work? I'd like to know what exactly you did in case I need to update the directions. Smiley
newbie
Activity: 4
Merit: 0
December 26, 2017, 07:04:17 AM
Ok, thanks showing me the way. The instructions didn't work for me, after searching  https://brew.sh/index_nl.html  worked well. I had also to replace armory to another map, then it worked! Pjieuw! Grin

Many txs! Wink


sr. member
Activity: 525
Merit: 282
December 25, 2017, 04:40:45 PM
Dawm, struckelling all around at Christmasday..lol..

Read me.
newbie
Activity: 4
Merit: 0
December 25, 2017, 04:39:10 PM
Dawm, struckelling all around at Christmasday..lol..


Situation: New Mac Air with Sierra 10.13.2, Bitcoin core V0.15.1 and Armory 0.96.3.99.

Bitcoin core went well bulding upend connecting, is now done with connecting.

Starting up Armory is the big issue....

package Armory will install, that aint the problem. but after that...

First start up Bitcoine core, then after that started Armory. No result. Just a few seconds the image of Armory blinking. Then its disappears, it won't start up.

I ve removed the program to another folder, didn't work.

Disabled Gatekeeper in terminal, didn't work.

dump:
Process:               Python [1151]
Path:                  /Applications/Armory 2.app/Contents/MacOS/Armory
Identifier:            com.armory.armory
Version:               Huh
Code Type:             X86-64 (Native)
Parent Process:        Huh [1]
Responsible:           Python [1151]
User ID:               501

Date/Time:             2017-12-25 22:24:44.333 +0100
OS Version:            Mac OS X 10.13.2 (17C88)
Report Version:        12
Anonymous UUID:        09F2F47F-BC4C-4A7D-387C-4C91029BC4AA

Sleep/Wake UUID:       E364B7A2-23AD-463F-88A5-48E12B87C69D

Time Awake Since Boot: 9700 seconds
Time Since Wake:       500 seconds

System Integrity Protection: enabled

Crashed Thread:        0

Exception Type:        EXC_CRASH (SIGABRT)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Exception Note:        EXC_CORPSE_NOTIFY

Termination Reason:    DYLD, [0x1] Library missing

Application Specific Information:
dyld: launch, loading dependent libraries
DYLD_FRAMEWORK_PATH=/Applications/Armory 2.app/Contents/MacOS/../Dependencies:/Applications/Armory 2.app/Contents/MacOS/../Frameworks
DYLD_LIBRARY_PATH=/Applications/Armory 2.app/Contents/MacOS/../Dependencies:/Applications/Armory 2.app/Contents/MacOS/../Frameworks

Dyld Error Message:
  Library not loaded: /usr/local/opt/openssl/lib/libssl.1.0.0.dylib
  Referenced from: /Applications/Armory 2.app/Contents/MacOS/Python
  Reason: image not found

Binary Images:
       0x100000000 -        0x100000fff +Python (Huh) /Applications/Armory 2.app/Contents/MacOS/Python
       0x10a62d000 -        0x10a67798f  dyld (519.2.2) <6695F30B-4E88-3C0B-9867-7D738C44A3E6> /usr/lib/dyld

Model: MacBookAir7,2, BootROM MBA71.0171.B00, 2 processors, Intel Core i5, 1,8 GHz, 8 GB, SMC 2.27f2
Graphics: Intel HD Graphics 6000, Intel HD Graphics 6000, Built-In
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.77.37.5.1a3)
Bluetooth: Version 6.0.2f2, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0512G, 500,28 GB
USB Device: USB 3.0 Bus
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Air, Apple Inc., 27.2

I did read all the treats so far I could find, but no solutions for. Are there more members with this problem?


Happy Christmas to all for you from Belgium!
legendary
Activity: 3766
Merit: 1364
Armory Developer
December 19, 2017, 06:01:32 PM
everything worked like a charm.  thx goatpig!

how do i make the ccDlgGeometry line deletion persistent? 

Idk, it's some weird shit where the dialog appears minimized or out frame for whatever reason. I may just get rid of the damn geometry saving for this dialog if I can figure out what's going on.
member
Activity: 178
Merit: 10
December 19, 2017, 05:05:06 PM
everything worked like a charm.  thx goatpig!

how do i make the ccDlgGeometry line deletion persistent? 
member
Activity: 178
Merit: 10
December 19, 2017, 03:42:19 PM
The entire line.

ok, i'm off.  will let you know how CPFP goes...
legendary
Activity: 3766
Merit: 1364
Armory Developer
December 19, 2017, 03:34:28 PM
The entire line.
member
Activity: 178
Merit: 10
December 19, 2017, 03:24:34 PM
Remove the dlg size entry from Settings.txt

ok, i totally screwed that up somehow the last time you told me to do that and i had to recompile.  this is what i see in the Settings.tx file.  what exactly do i delete?:

ccDlgGeometry                        | 01d9d0cb000100000000000000000000000004ff000003050000000000000000fffffffefffffff e000000000200

everything after the "|" ?  or do i make it a true or false?  or delete the entire line?
legendary
Activity: 3766
Merit: 1364
Armory Developer
December 19, 2017, 03:14:44 PM
Remove the dlg size entry from Settings.txt
member
Activity: 178
Merit: 10
December 19, 2017, 03:07:31 PM
CPFP. Spend the change of the stuck ZC with a big fee back to yourself.

crap, now Coin Control button freezes again!
legendary
Activity: 3766
Merit: 1364
Armory Developer
December 19, 2017, 02:29:47 PM
CPFP. Spend the change of the stuck ZC with a big fee back to yourself.
member
Activity: 178
Merit: 10
December 19, 2017, 12:20:25 PM
having never had to do this before with a non-RBF enabled tx, what's the fastest, safest, most reliable way to unstick a too low fee stuck tx from the mempool using this version?  specific details would be appreciated.
legendary
Activity: 3766
Merit: 1364
Armory Developer
December 17, 2017, 06:35:02 PM
Yeah, sometimes next week probably.
full member
Activity: 147
Merit: 100
Do you like fire? I'm full of it.
December 17, 2017, 04:29:54 PM
So if there's another testing build is it gonna be an RC or a CR? (christmas release) Cheesy
legendary
Activity: 3766
Merit: 1364
Armory Developer
December 17, 2017, 04:20:45 PM
I'm pretty that's fixed in testing as well.
full member
Activity: 147
Merit: 100
Do you like fire? I'm full of it.
December 17, 2017, 01:56:25 PM
Nay, I ain't using McAffee either.

EDIT: I found something that may be useful. I had generated 22 P2SH-P2WPKH addresses by clicking on the "receive bitcoins" button and another 2000 using compute. However, on the next restart of Qt, it moved ALL those addresses that I hadn't spent from into the P2PKH area, where they looked completely different. The only way I was able to tell was because they carried the labels I had given them. And the unused P2SH-P2WPKH field became empty. They were effectively all converted. I now had 2022 P2PKH addresses and none others.
member
Activity: 96
Merit: 10
December 17, 2017, 01:20:29 PM
No encrypted HDD, no NAS, and antivirus already excludes the Armory folder(which cotains both ADB and Bitcoin blockchain) due to some well-known trolling events where ppl deliberately included transaction bytes to resemble malware and flag false-positives.

I've used McAfee AV some time ago. Previously everything worked pretty well, but all in a sudden I've gotten corrupted files and crashes of ArmoryDB. I also tried to set folder exemptions, but it didn't really prevent these errors from happening. So I've tried to deinstall my AV and gotten rid of all of my AV services (except Win Defender) and then it worked like it should.
But I have to admit it was hard to drop something that's already paid in order to get Armory running. So I can't tell if that might solve your issue, but again it looks pretty similar to mine.
full member
Activity: 147
Merit: 100
Do you like fire? I'm full of it.
December 17, 2017, 01:02:30 PM
I already did that thrice. What I've done now is deleted the last few block files from bitcoin core corresponding to about where that recurring 99%-ish point would be(going by the logs), and restarted it with -reindex. Once it's back up to sync I will -AGAIN- rebuild the armory DB.

Your issue reminds me on mine serveral months ago. Are you using any Anti-Virus software, NAS or encrypted HDD?
No encrypted HDD, no NAS, and antivirus already excludes the Armory folder(which cotains both ADB and Bitcoin blockchain) due to some well-known trolling events where ppl deliberately included transaction bytes to resemble malware and flag false-positives.
Pages:
Jump to: