[1050 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] - page 146.

mogrith

legendary

Activity: 1470

Merit: 1001

Use Coinbase Account almosanywhere with Shift card

Quote from: SgtMoth on September 27, 2013, 01:27:25 PM

it seemed to me maybe it was a com scan problem, mine kept saying something about com_1. my issue is in it starting. i dont remember bitminter crashing, power goes off too often around here. just have to keep rebooting till everything shows up and it seems everything has to show up or nothing starts. ive been very busy at work and have little time to play around with things.

Com1 is not the issue. Com1 is normally NOT a USB ASIC but an actual serial port prob on back of PC. Client is not running as administrator and needs Admin(root) access to talk to COM1 and so gives a error message when it scans all avail com ports to see if a ASIC is there.

SgtMoth

hero member

Activity: 910

Merit: 1004

buy silver!

it seemed to me maybe it was a com scan problem, mine kept saying something about com_1. my issue is in it starting. i dont remember bitminter crashing, power goes off too often around here. just have to keep rebooting till everything shows up and it seems everything has to show up or nothing starts. ive been very busy at work and have little time to play around with things.

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

My jala runs with BitMinter client without a single issue.

It would be useful to know what you see in the log and what you need to do to get mining again.

SgtMoth

hero member

Activity: 910

Merit: 1004

buy silver!

I was having the same troubles too. From usb eruptors, jals and 60g/h's, I had to stop using bitminter client. When I was at work and they would go down, the wife just refused to restart them, too difficult to get running. Im using cgminer now. Im mining with two computers, both crash for unknown reasons(app crash). Its easier to start.

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: solari on September 27, 2013, 08:53:09 AM

Yes.
But sometimes I have to restart my PC. And than it takes up to 10 times to get them running.
I can see each Single 60GH/s at BitMinterClient. But some of them don´t show the temperature and don´t start.

What messages do you see in the log?

solari

member

Activity: 82

Merit: 10

Quote from: baddogshuck on September 27, 2013, 07:34:23 AM

Quote from: solari on September 27, 2013, 05:56:15 AM

J have 4 BFL SINGLE 60 GHs each on one PC.
Windows 7, Java 7.40, new drivers, Bitminter 1.4.1
Bitminter shows all of the singles.
But sometimes, one or two don´t start. Sometimes they do.
I don´t knwo what to do.

Surely you'd want to leave them running all the time instead of turning them on and off?

Yes.
But sometimes I have to restart my PC. And than it takes up to 10 times to get them running.
I can see each Single 60GH/s at BitMinterClient. But some of them don´t show the temperature and don´t start.

baddogshuck

newbie

Activity: 5

Merit: 0

Quote from: solari on September 27, 2013, 05:56:15 AM

J have 4 BFL SINGLE 60 GHs each on one PC.
Windows 7, Java 7.40, new drivers, Bitminter 1.4.1
Bitminter shows all of the singles.
But sometimes, one or two don´t start. Sometimes they do.
I don´t knwo what to do.

Surely you'd want to leave them running all the time instead of turning them on and off?

solari

member

Activity: 82

Merit: 10

J have 4 BFL SINGLE 60 GHs each on one PC.
Windows 7, Java 7.40, new drivers, Bitminter 1.4.1
Bitminter shows all of the singles.
But sometimes, one or two don´t start. Sometimes they do.
I don´t knwo what to do.

Byteme

newbie

Activity: 32

Merit: 0

Quote from: mo_mo on September 26, 2013, 08:01:42 PM

is there something wrong with bitminter, only 3 blocks found so far...

https://bitminter.com/blocks

mo_mo

full member

Activity: 194

Merit: 100

is there something wrong with bitminter, only 3 blocks found so far...

Jayjay04

legendary

Activity: 1364

Merit: 1000

43 TH !!!
Nice Stuff !

junshong

full member

Activity: 192

Merit: 100

Hi!

Have anyone try the BFL hosting? And pointed it to bitminter?

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Easy mode isn't for boosting your earnings, but for reducing the daily variance in your earnings, if you feel a need for that.

Read this for more info: https://bitcointalksearch.org/topic/m.3142713

huryde

member

Activity: 82

Merit: 10

Quote from: mo_mo on September 25, 2013, 11:21:13 AM

ANYONE HERE CHOSE THE EASYMODE FOR THE PERKS

I did, not really noticing earning any more BTC but NMC is earning about 20% more on my setup from what I can tell.

I have been trading in my NMC to BTC at Vircurex

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Nemo1024 on September 25, 2013, 09:36:15 AM

Quote from: TheQuin on September 25, 2013, 09:22:36 AM

Quote from: DrHaribo on September 25, 2013, 09:06:37 AM

What's the difference between red fury and blue fury?

They couldn't red LEDs so they used blue and changed the name Lips sealed

False. It's the colour of the PCBs. The LEDs stay red.

thats why I have red/blue in my ebay ad

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=151130985862&ssPageName=STRK:MESE:IT

norpick

newbie

Activity: 32

Merit: 0

iv been watching mine for a while now this evening and the speeds are still erratic. there's also been a few times where all speed has dropped to zero, then fired back up again. first time iv seen this happen while using the client.,

Jayjay04

legendary

Activity: 1364

Merit: 1000

I Lost 2 block erupters last night, just disappeared from bitminter... not the first time it happens. But when I probe all ports this morning they were back on

westkybitcoins

legendary

Activity: 980

Merit: 1004

Firstbits: Compromised. Thanks, Android!

Quote from: norpick on September 25, 2013, 11:11:08 AM

is anyone having problems with their speeds on the client? mine is all over the place at the moment, iv also noticed my speed on the client when at max isnt the same as what's shown on the site itself,

Same here. One of my workers is two Block Erupters. It fluctuated wildly last night, triggering several email alerts that I didn't think it should (I have the lower bound set at 400 MH/s) and just a couple of hours ago it dropped down to 0 MH/s, before bouncing back up. I'm using bfgminer on that worker, not the Java client.

EDIT: Guess I should add that the fluctuation seems to be server-side; the actual miner seems to be a fairly consistent 600-700 MH/s.

mo_mo

full member

Activity: 194

Merit: 100

ANYONE HERE CHOSE THE EASYMODE FOR THE PERKS

norpick

newbie

Activity: 32

Merit: 0

is anyone having problems with their speeds on the client? mine is all over the place at the moment, iv also noticed my speed on the client when at max isnt the same as what's shown on the site itself,

Topic: [1050 TH] BitMinter.com [1% PPLNS,Pays TxFees +MergedMining,Stratum,GBT,vardiff] - page 146. (Read 837101 times)