1080Ti Specific - Best mining option - page 87.

nsummy

full member

Activity: 1179

Merit: 131

Quote from: EfEks on January 07, 2018, 08:15:52 AM

Quote from: nsummy on January 06, 2018, 11:42:14 PM

Quote from: EfEks on January 06, 2018, 10:25:37 PM

Quote from: RealSwissMiner on January 06, 2018, 02:04:14 PM

Quote from: Riptide_NVN on January 06, 2018, 01:15:11 PM

Gentlemen/Ladies

Currently running ccminer-alexis 1.0

Is this still one of if not the best option for x17 and CUDA? Has worked well for me but as you all know efficiency is king.

Im still going for x17 as for what I know it's still the most profitable. Maybe there is something new out there but kept secret as long as possible

I have to say that I love the algos where Nvidia is king as all the AMD rigs can't switch to that algo Cheesy

What are you mining with x17? verge?

Not OP, but in my opinion, the best x17 coin right now is Shield, not Verge. Shield is at 27 cents and Verge is at 18. Not to mention Verge has about 30x the circulating supply.

With Shield aren’t you better off using lyra2?

I suppose it depends on your hardware, but for me x17 is more profitable. I have 2 1080s, 2 1070s, and a 1050ti. Here is a calculator for the different algos: https://blockstats.pw/shield/

Riptide_NVN

member

Activity: 294

Merit: 16

Using Alexis non palgin I get 19.2 mh/s. 100% tdp +75 core -400 memory. That hash is reported by the client.

Ccminer 2.2.4 was significantly slower and also didn't like my overclock.

nsummy

full member

Activity: 1179

Merit: 131

Quote from: mpirun on January 07, 2018, 05:41:44 PM

Quote from: nsummy on January 06, 2018, 11:42:14 PM

Not OP, but in my opinion, the best x17 coin right now is Shield, not Verge. Shield is at 27 cents and Verge is at 18. Not to mention Verge has about 30x the circulating supply.

is there any pool for that?. I like the chart.

This is where I am mining. We are finding a block every 3 minutes: http://bsod.pw/site/mining

nsummy

full member

Activity: 1179

Merit: 131

Quote from: ManuBBXX on January 09, 2018, 01:21:44 PM

Quote from: ?? on ??

Quote from: Riptide_NVN on January 08, 2018, 11:32:29 PM

Almost everyone on yiimp x17 uses ccminer 2.2.4. On zpool it's ccminer Alexis. You can see this by looking at the bench tab. Seems odd the two use different clients.

I am trying 2.2.4 tonight. It runs the GPU cooler than ccminer Alexis and pulls less power. Hash rate reported by the client is lower.

I'll let it run 24 hr and if it really does run slower I'll go back to ccminer Alexis.

Running Alexis78 x17 -i 20 I'm seeing an average of 17.8 mh/s in the console for days now.

So Alexis is the best X17 miner ?

I think this is the best miner for x17: https://github.com/palginpav/ccminer/releases Yiimp benchmarks are good to get an idea of what miner to use, but only people who use the stats tag show up in them, and some of the modified miners crash if the pool asks for stats.

Aeon_

jr. member

Activity: 30

Merit: 1

Quote from: cryptologicc on January 09, 2018, 01:42:54 PM

Whats the sol rate you get for 1080ti mining equihash and what OC have you guys done?

This is what I am getting with core 200; Memory 180; Power 205

> GPU3 52C Sol/s: 717.1 Sol/W: 3.56 Avg: 727.3 I/s: 389.7 Sh: 0.39 1.00 54
> GPU2 53C Sol/s: 740.0 Sol/W: 3.56 Avg: 726.7 I/s: 389.7 Sh: 0.41 1.00 52
> GPU0 52C Sol/s: 722.7 Sol/W: 3.58 Avg: 732.7 I/s: 392.8 Sh: 0.40 1.00 60
> GPU1 54C Sol/s: 727.4 Sol/W: 3.57 Avg: 730.3 I/s: 391.7 Sh: 0.40 1.00 53
GPU4 52C Sol/s: 724.6 Sol/W: 3.58 Avg: 730.7 I/s: 391.7 Sh: 0.40 1.00 50
GPU5 52C Sol/s: 725.7 Sol/W: 3.55 Avg: 724.3 I/s: 388.5 Sh: 0.40 1.00 51

========== Sol/s: 4357.7 Sol/W: 3.57 Avg: 4372.0 I/s: 2344.1 Sh: 2.40 1.00 53

My settings:
Power 63% - Core Clock +150% - Mem 0% - Fan Manual at 85%
Using DSTM (equihash):
GPU0 68C Sol/s: 636.8 Sol/W: 4.05 Avg: 634.5

ManuBBXX

full member

Activity: 839

Merit: 100

With my 4 Aorus 1080TI's, the core clock oscillating between 1300 and 1500 mhz ! oO

Power limit 65%, with stock, or mem +200 settings.
Why ?

Usually, it is at 2050 mhz core, stable
Using Alexis ccminer, 22.5 intensity default settings

naresh963

newbie

Activity: 42

Merit: 0

Quote from: ManuBBXX on January 09, 2018, 02:34:42 PM

Quote from: naresh963 on January 09, 2018, 01:52:23 PM

Quote from: ManuBBXX on January 09, 2018, 01:21:44 PM

Quote from: ?? on ??

Quote from: Riptide_NVN on January 08, 2018, 11:32:29 PM

Almost everyone on yiimp x17 uses ccminer 2.2.4. On zpool it's ccminer Alexis. You can see this by looking at the bench tab. Seems odd the two use different clients.

I am trying 2.2.4 tonight. It runs the GPU cooler than ccminer Alexis and pulls less power. Hash rate reported by the client is lower.

I'll let it run 24 hr and if it really does run slower I'll go back to ccminer Alexis.

Running Alexis78 x17 -i 20 I'm seeing an average of 17.8 mh/s in the console for days now.

So Alexis is the best X17 miner ?

Alexis with intensity of 21.5 ( value found in nemosminer 1.7.6 zip bat file) gives an average of 20.5 MH/s at 100% tdp, core +20, mem +200, fan 80%.

So, It is usefull to OC the mem too on X17 algo ?

Core frequency was oscillating +-25mhz. so i oced the mem till it looked stable at constant 2025mhz.

ManuBBXX

full member

Activity: 839

Merit: 100

Quote from: naresh963 on January 09, 2018, 01:52:23 PM

Quote from: ManuBBXX on January 09, 2018, 01:21:44 PM

Quote from: ?? on ??

Quote from: Riptide_NVN on January 08, 2018, 11:32:29 PM

Almost everyone on yiimp x17 uses ccminer 2.2.4. On zpool it's ccminer Alexis. You can see this by looking at the bench tab. Seems odd the two use different clients.

I am trying 2.2.4 tonight. It runs the GPU cooler than ccminer Alexis and pulls less power. Hash rate reported by the client is lower.

I'll let it run 24 hr and if it really does run slower I'll go back to ccminer Alexis.

Running Alexis78 x17 -i 20 I'm seeing an average of 17.8 mh/s in the console for days now.

So Alexis is the best X17 miner ?

Alexis with intensity of 21.5 ( value found in nemosminer 1.7.6 zip bat file) gives an average of 20.5 MH/s at 100% tdp, core +20, mem +200, fan 80%.

So, It is usefull to OC the mem too on X17 algo ?

naresh963

newbie

Activity: 42

Merit: 0

Quote from: ManuBBXX on January 09, 2018, 01:21:44 PM

Quote from: ?? on ??

Quote from: Riptide_NVN on January 08, 2018, 11:32:29 PM

Almost everyone on yiimp x17 uses ccminer 2.2.4. On zpool it's ccminer Alexis. You can see this by looking at the bench tab. Seems odd the two use different clients.

I am trying 2.2.4 tonight. It runs the GPU cooler than ccminer Alexis and pulls less power. Hash rate reported by the client is lower.

I'll let it run 24 hr and if it really does run slower I'll go back to ccminer Alexis.

Running Alexis78 x17 -i 20 I'm seeing an average of 17.8 mh/s in the console for days now.

So Alexis is the best X17 miner ?

Alexis with intensity of 21.5 ( value found in nemosminer 1.7.6 zip bat file) gives an average of 20.5 MH/s at 100% tdp, core +20, mem +200, fan 80%.

cryptologicc

newbie

Activity: 3

Merit: 0

Whats the sol rate you get for 1080ti mining equihash and what OC have you guys done?

This is what I am getting with core 200; Memory 180; Power 205

> GPU3 52C Sol/s: 717.1 Sol/W: 3.56 Avg: 727.3 I/s: 389.7 Sh: 0.39 1.00 54
> GPU2 53C Sol/s: 740.0 Sol/W: 3.56 Avg: 726.7 I/s: 389.7 Sh: 0.41 1.00 52
> GPU0 52C Sol/s: 722.7 Sol/W: 3.58 Avg: 732.7 I/s: 392.8 Sh: 0.40 1.00 60
> GPU1 54C Sol/s: 727.4 Sol/W: 3.57 Avg: 730.3 I/s: 391.7 Sh: 0.40 1.00 53
GPU4 52C Sol/s: 724.6 Sol/W: 3.58 Avg: 730.7 I/s: 391.7 Sh: 0.40 1.00 50
GPU5 52C Sol/s: 725.7 Sol/W: 3.55 Avg: 724.3 I/s: 388.5 Sh: 0.40 1.00 51

========== Sol/s: 4357.7 Sol/W: 3.57 Avg: 4372.0 I/s: 2344.1 Sh: 2.40 1.00 53

melancoly

member

Activity: 168

Merit: 10

1080ti
Would not it be better to opt for AT instead of
I think ATi graphics cards are more successful

ManuBBXX

full member

Activity: 839

Merit: 100

Quote from: ?? on ??

Quote from: Riptide_NVN on January 08, 2018, 11:32:29 PM

Almost everyone on yiimp x17 uses ccminer 2.2.4. On zpool it's ccminer Alexis. You can see this by looking at the bench tab. Seems odd the two use different clients.

I am trying 2.2.4 tonight. It runs the GPU cooler than ccminer Alexis and pulls less power. Hash rate reported by the client is lower.

I'll let it run 24 hr and if it really does run slower I'll go back to ccminer Alexis.

Running Alexis78 x17 -i 20 I'm seeing an average of 17.8 mh/s in the console for days now.

So Alexis is the best X17 miner ?

Riptide_NVN

member

Activity: 294

Merit: 16

Almost everyone on yiimp x17 uses ccminer 2.2.4. On zpool it's ccminer Alexis. You can see this by looking at the bench tab. Seems odd the two use different clients.

I am trying 2.2.4 tonight. It runs the GPU cooler than ccminer Alexis and pulls less power. Hash rate reported by the client is lower.

I'll let it run 24 hr and if it really does run slower I'll go back to ccminer Alexis.

AllthewayUUppp

newbie

Activity: 84

Merit: 0

Quote from: tpd09 on January 07, 2018, 07:20:45 AM

Quote from: AllthewayUUppp on January 06, 2018, 02:04:51 PM

Hi anyone can suggest for specification of mining rig, how much and ROI. Thank you in advance.

You should try watching few videos on YouTube, there are ton of good content creators, listed few for you below
https://www.youtube.com/channel/UCT44w6854K62cSiwA1aiXfw
https://www.youtube.com/user/BitsBeTrippin

good luck

ps: dont forget to donate if they do help you Wink

Sure I will. Thank you so much for the share will start to watch this now. Cheesy

mpirun

newbie

Activity: 55

Merit: 0

Quote from: nsummy on January 06, 2018, 11:42:14 PM

Not OP, but in my opinion, the best x17 coin right now is Shield, not Verge. Shield is at 27 cents and Verge is at 18. Not to mention Verge has about 30x the circulating supply.

is there any pool for that?. I like the chart.

pfft

full member

Activity: 165

Merit: 100

Quote from: mak013 on January 07, 2018, 08:43:16 AM

Quote from: pfft on January 07, 2018, 08:06:43 AM

Quote from: Makak4R on January 07, 2018, 05:52:57 AM

Quote from: pfft on January 06, 2018, 02:36:17 PM

Do you know why i get this error ?
INFO : [20:35:44] : MESSAGE FROM SERVER: welcome on ALTMINER.NET - happy mining!
INFO : [20:35:44] : Share difficulty reset -- 512 (0.00781)
INFO : [20:35:44] : New block #45455 received, new difficulty is 87.365
INFO : [20:35:45] : GPU #3: GeForce GTX 1070, flags: 0, 1, 0
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.

this error often pops out when your intensity is set too high or you should lower overclocking of your gpu's memory.
but it is still a good advice to set windows virtual memory to 50-60GB
so you may change intensity with -i key in your bat file

all done but i get disconnect all the time ?
INFO : [14:05:22] : Share Accepted
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1500 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1513 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.

he answered you. use in your start file(.bat or .cmd) key -i for example -i 19 and try again. if error repeats - decrease it. and set windows memory fixed 16GB at least.

i set 60gb virtual memory and i left without -i and is automatic i will try with -i 15 and see what is happen.

mak013

hero member

Activity: 2492

Merit: 761

Quote from: pfft on January 07, 2018, 08:06:43 AM

Quote from: Makak4R on January 07, 2018, 05:52:57 AM

Quote from: pfft on January 06, 2018, 02:36:17 PM

Do you know why i get this error ?
INFO : [20:35:44] : MESSAGE FROM SERVER: welcome on ALTMINER.NET - happy mining!
INFO : [20:35:44] : Share difficulty reset -- 512 (0.00781)
INFO : [20:35:44] : New block #45455 received, new difficulty is 87.365
INFO : [20:35:45] : GPU #3: GeForce GTX 1070, flags: 0, 1, 0
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.

this error often pops out when your intensity is set too high or you should lower overclocking of your gpu's memory.
but it is still a good advice to set windows virtual memory to 50-60GB
so you may change intensity with -i key in your bat file

all done but i get disconnect all the time ?
INFO : [14:05:22] : Share Accepted
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1500 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1513 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.

he answered you. use in your start file(.bat or .cmd) key -i for example -i 19 and try again. if error repeats - decrease it. and set windows memory fixed 16GB at least.

EfEks

newbie

Activity: 7

Merit: 0

Quote from: nsummy on January 06, 2018, 11:42:14 PM

Quote from: EfEks on January 06, 2018, 10:25:37 PM

Quote from: RealSwissMiner on January 06, 2018, 02:04:14 PM

Quote from: Riptide_NVN on January 06, 2018, 01:15:11 PM

Gentlemen/Ladies

Currently running ccminer-alexis 1.0

Is this still one of if not the best option for x17 and CUDA? Has worked well for me but as you all know efficiency is king.

Im still going for x17 as for what I know it's still the most profitable. Maybe there is something new out there but kept secret as long as possible

I have to say that I love the algos where Nvidia is king as all the AMD rigs can't switch to that algo Cheesy

What are you mining with x17? verge?

Not OP, but in my opinion, the best x17 coin right now is Shield, not Verge. Shield is at 27 cents and Verge is at 18. Not to mention Verge has about 30x the circulating supply.

With Shield aren’t you better off using lyra2?

pfft

full member

Activity: 165

Merit: 100

Quote from: Makak4R on January 07, 2018, 05:52:57 AM

Quote from: pfft on January 06, 2018, 02:36:17 PM

Do you know why i get this error ?
INFO : [20:35:44] : MESSAGE FROM SERVER: welcome on ALTMINER.NET - happy mining!
INFO : [20:35:44] : Share difficulty reset -- 512 (0.00781)
INFO : [20:35:44] : New block #45455 received, new difficulty is 87.365
INFO : [20:35:45] : GPU #3: GeForce GTX 1070, flags: 0, 1, 0
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.

this error often pops out when your intensity is set too high or you should lower overclocking of your gpu's memory.
but it is still a good advice to set windows virtual memory to 50-60GB
so you may change intensity with -i key in your bat file

all done but i get disconnect all the time ?
INFO : [14:05:22] : Share Accepted
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1500 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1513 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.
Cuda error in func 'neoscrypt_cpu_hash_1080' at line 1509 : unspecified launch failure.

tpd09

full member

Activity: 287

Merit: 100

Quote from: AllthewayUUppp on January 06, 2018, 02:04:51 PM

Hi anyone can suggest for specification of mining rig, how much and ROI. Thank you in advance.

You should try watching few videos on YouTube, there are ton of good content creators, listed few for you below
https://www.youtube.com/channel/UCT44w6854K62cSiwA1aiXfw
https://www.youtube.com/user/BitsBeTrippin

good luck

ps: dont forget to donate if they do help you Wink

Topic: 1080Ti Specific - Best mining option - page 87. (Read 409660 times)