Back up and running, sorry for any inconvenience.
Looks like it died just as we headed for the plane, go figure....
Not 100% sure what happened, but will examine the logs when back in the office.
Cheers!
Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 220. (Read 2591920 times)
February 08, 2015, 11:06:03 PM
February 08, 2015, 09:48:09 PM
btw windpath site is not working well
Thx, 85 days without issue, literally arrived to vacation tonight...
Laptop died on the plane, charging now and will restart p2pool within the hour.
Cheers
February 08, 2015, 09:29:25 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You can't jump in and out of p2pool... There's no gain in it because you lose shares. Also I'd like you to explain how anyone can predict when the pool is going to hit a block. So much fail in your post...You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
less than 24hrs to loose shares that i can guarantee you.
February 08, 2015, 09:28:29 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
OUT you go byex2 LoL
btw windpath site is not working well
February 08, 2015, 09:23:38 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You can't jump in and out of p2pool... There's no gain in it because you lose shares. Also I'd like you to explain how anyone can predict when the pool is going to hit a block. So much fail in your post...You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You're misunderstanding how p2pool works.
M
February 08, 2015, 09:14:19 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You can't jump in and out of p2pool... There's no gain in it because you lose shares. Also I'd like you to explain how anyone can predict when the pool is going to hit a block. So much fail in your post...You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
That is not how PPLNS works. Yes, you may get lucky and get a share right off the bat, but that is just one share in a long chain. After over a year of testing, I feel comfortable saying, if you stick with it, p2pool is the best pool out there.
Our luck changes like the tides, but if your not in it you do not benefit.
The best (and only) way to mine with p2pool is to go for the long haul.
I can attest, as can many other long timers here, that it is more profitable to stick around then hop around...
February 08, 2015, 08:53:42 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You can't jump in and out of p2pool... There's no gain in it because you lose shares. Also I'd like you to explain how anyone can predict when the pool is going to hit a block. So much fail in your post...You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
February 08, 2015, 08:50:32 PM
Hey guys, i made my own node and started mining. But i cant figure out how to set the diff for the ant s4. i tried puting worker.1+2054 but the diff stays at 1000. Should i change the diff for the s4 or should i leave it? btw i have the newest firmware from bitmain
i believe what you;ve set is the "+" which is known as pseudo diff, max is 998.99xxxxxxxx, you can only set lower than max 998.999xxxxxxx so for a s4 or miners that is above 1ths, there's no need for it except for smaller miners like s3 where you will set +512 or any other value.
you might want to set queue to 0 or 1 by ssh'ing in.
welcome to p2pool & happy mining.
Thanks man, now im gettin the diff
, anyway my queue is 1. and with 118% Efficiency. So far two shares 
February 08, 2015, 08:47:23 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
Its PPLNS so it is hoop proof. They need to stay little bit more to earn the max. You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
February 08, 2015, 08:45:40 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
I'm not sure what you're referring to? Like every pool, p2pool is always "ready to block". Any share care be a block.
Hopper safe means, yes, you can hop in and just happen to be there right before a block ... but you'll also get a smidgen of what you'd get if you were here all along.
M
February 08, 2015, 08:45:19 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You can't jump in and out of p2pool... There's no gain in it because you lose shares. Also I'd like you to explain how anyone can predict when the pool is going to hit a block. So much fail in your post... You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
February 08, 2015, 08:24:37 PM
I must say, But I do love P2pool, but that is hoop proof.. NOT!!!!
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
You can see when users bail out and when there back in when there ready to block. I wish this was more hoop proof as they say. Im out.
February 08, 2015, 07:42:32 PM
Hey guys, i made my own node and started mining. But i cant figure out how to set the diff for the ant s4. i tried puting worker.1+2054 but the diff stays at 1000. Should i change the diff for the s4 or should i leave it? btw i have the newest firmware from bitmain
i believe what you;ve set is the "+" which is known as pseudo diff, max is 998.99xxxxxxxx, you can only set lower than max 998.999xxxxxxx so for a s4 or miners that is above 1ths, there's no need for it except for smaller miners like s3 where you will set +512 or any other value.
you might want to set queue to 0 or 1 by ssh'ing in.
welcome to p2pool & happy mining.
February 08, 2015, 06:06:02 PM
Hey guys, i made my own node and started mining. But i cant figure out how to set the diff for the ant s4. i tried puting worker.1+2054 but the diff stays at 1000. Should i change the diff for the s4 or should i leave it? btw i have the newest firmware from bitmain
February 08, 2015, 04:42:50 PM
We can add worker names to our miners right? For example 1KT2ceAEoMnpHMgRCoSW39teFQMBv4vebs_S4-1
If you're running your own node, you can set the payout address in the p2pool start-up command using the -a parameter, then call your workers whatever you want - all payouts will go to the payout address you stipulate in the p2pool command. This makes it easy to monitor your workers
That's what I'm already doing, as can be seen here: http://69.157.250.207:9332/static/p2pool-node-status/
But I'd like for the predicted payout to show up beside each miner instead of under the node's status. Any way of doing that, and still keeping each miner separate?
once i used "btc add"."miners name" & i forgot to set a default payout add by adding the -a cmd but then p2p auto created a payout add for me & i can see a predicted payout beside the miner.
ut i just used a diff add for each miner & i can see individual predicted payout but not the node total predicted payout.
February 08, 2015, 04:31:23 PM
We can add worker names to our miners right? For example 1KT2ceAEoMnpHMgRCoSW39teFQMBv4vebs_S4-1
If you're running your own node, you can set the payout address in the p2pool start-up command using the -a parameter, then call your workers whatever you want - all payouts will go to the payout address you stipulate in the p2pool command. This makes it easy to monitor your workers
That's what I'm already doing, as can be seen here: http://69.157.250.207:9332/static/p2pool-node-status/
But I'd like for the predicted payout to show up beside each miner instead of under the node's status. Any way of doing that, and still keeping each miner separate?
February 08, 2015, 04:07:23 PM
We can add worker names to our miners right? For example 1KT2ceAEoMnpHMgRCoSW39teFQMBv4vebs_S4-1
If you're running your own node, you can set the payout address in the p2pool start-up command using the -a parameter, then call your workers whatever you want - all payouts will go to the payout address you stipulate in the p2pool command. This makes it easy to monitor your workers
February 08, 2015, 03:57:07 PM
We can add worker names to our miners right? For example 1KT2ceAEoMnpHMgRCoSW39teFQMBv4vebs_S4-1
February 08, 2015, 10:49:21 AM
Picked up a couple hundred TH on miningrigrentals. Owner of the rig pushed it up to over 600 TH to ramp it up. It's settling back down to the 200 I rented. Yes I overpaid for it... But the gambler in me is hoping we hit a few blocks in the next 6 hours
Just rented some myself. I did good on what I rented the other day when we hit those back to back blocks. Hoping to repeat it again.
do take note, if possible rent those rigs as close as possible to your own node or whichever node that you may be mining at. high latency no good for p2pool.
You have no way of knowing the miner's ping from their location to Westhash, only your node to Westhash. There could easily be an extra 100-200ms that you can't measure.
you might be able to tell by the rejected hashrate, normally it's high
Kind of what I thought. It was respectable so I felt it was good. Seeing that I am mining on someone else's node I can't ping Westhash so I just watched the DOA it was not abnormally high. I am using a node that was ranked high on the http://nodes.p2pool.co/ and I ping it at 50ms -61ms depending on time of day.
February 08, 2015, 06:16:32 AM
Picked up a couple hundred TH on miningrigrentals. Owner of the rig pushed it up to over 600 TH to ramp it up. It's settling back down to the 200 I rented. Yes I overpaid for it... But the gambler in me is hoping we hit a few blocks in the next 6 hours
Just rented some myself. I did good on what I rented the other day when we hit those back to back blocks. Hoping to repeat it again.
do take note, if possible rent those rigs as close as possible to your own node or whichever node that you may be mining at. high latency no good for p2pool.
You have no way of knowing the miner's ping from their location to Westhash, only your node to Westhash. There could easily be an extra 100-200ms that you can't measure.
you might be able to tell by the rejected hashrate, normally it's high
Jump to: