Topic: ### A ChainWorks Industries (CWI) Project - CWIgm | Simple Powerful Stable - page 41. (Read 67732 times)

agree. great hashing rate but without a share after mining for about 7+ hours

4 1080 GTX Ti running at +120 core, 80% PL and 21 intensity. All running around 52.3 MH/s.

Whereas all the other miners I've run have the power limit and core clock constantly bouncing around, this one remains steady. Overall, very impressed with it. Thanks. 

ok, some quick observations after running for about 8 hours or so.

Short version - miner reports great hashrate, better then any other i tried so far.  However, the pool likes to jack up the worker diff way too high, choking out smaller rigs.

Long version:

Trying on a total of 10x1070's spread across one main rig, and some random boxes.

box 1 - win 7, single gpu. (worker 1)
box 2 - win 10, single gpu. (worker 4)
box 3 - win 7 2xgpu (worker 2)
box 4 - win 10 6xgpu. (worker 3)

All gpu's are tuned with exactly the same settings - +125 core, +500 mem, 60%tdp (110w) in afterburner. These were my go to settings for zcash and lbry, so i left them alone for now  All get just over 29mh on skunk, according to the miner.

However, and this is especially true for the single and 2x gpu machines, the pool difficulty ends up being too high.  The single gpu's started out at pool diff of 64 (worker at 0.25), which from my previous experimenting is the sweet spot for a single 1070 gpu, and then eventually ended up at diff of 256 (worker at 1).  At 256 the card chokes.  When the nethash is nice and steady, the card is still able to submit work ever 2-3 sometimes 4 blocks.  When whatever is hitting this coin hits it hard (when you see the nethash double in like 5 minutes) the card can't keep up with fast moving blocks at all.  There was a time when i caught a glimpse at the miner and saw at least a good dozen blocks go by before the card was able to submit any work.  There were instance that the card was so chocked, the pool would show that a worker dropped out, meaning that the card submitted no shares in whatever time interval the pool uses to calculate hash.    In fact, as i'm typing this i can see the miner window on my single gpu boxes, and one of them just had about 10 blocks go by without any work submitted (diff 256 pool, 1 at worker).

It's a similar story for the 2xgpu box.  The diff started off at 128, which again i think is a sweetspot for this setup, but then climbed to 512.  At that diff, just like the single gpu setup, too many blocks go by before a share is submitted and the cards choke.

6xgpu rig seems to be not as affected by this.  It started off at 256, then eventually climbed to 640.  It too misses out on blocks, and hashrate reported at the pool jumps around wildly, but at least it's able to get some shares in every other block or so.

Overall, i am very happy with the miner.  The pool is finding blocks at a good clip, and with good efficiency, so maybe this approach of jacking up the worker diff works.  But it feels wrong to see this many bunches of blocks go by without a share submitted.  To me it means that my gpu's are not even competing to find a solution to a whole lot of blocks.  You can't solve a block if you don't at least compete to solve it.

As i was finishing typing this, another 6 blocks went by before my single gpu rig submitted a share.  That means that this particular gpu didn't even compete for 6/7th of the opportunities to find a block.

Adready send pm, pls send me link and guide to use

Thanks

Hi guy,

I can not send pm to you.
Can you send me link to download sigt tool and guide to use?
Thanks alot

hi all ...

seems like i am online again - and will catch up on the posts ...

but so far - it seems all is well except for a few glitches here and there ...

we appreciate all your input and feedback ...

ill attend to the multitude of posts and pm / mails over the coming few hours ...

halving has already come and gone for signatum / skunkhash - yet mining is still going strong ...

#crysx

Hi can you check the TX fee you have on DNR pool - 0.07DNR is quite high!

Hello sir

This is for my test CW 0.9.8 on nvidia 382.53
Every cards stock (Not overclock) Power 80%, Fan 60%


Algo:Tribus

Gigabyte GTX 1060 3 GB: Speed: 32.12 MH/s (Samsung)
Gigabyte 1050 Ti 4 GB : Speed: 17.57 MH/s (Hynix)
Gigabyte 1050 Ti 4 GB : Speed: 17.57 MH/s (Hynix)
Gigabyte 1050 Ti 4 GB : Speed: 17.57 MH/s (Hynix)
Zotac 1050 Ti 4 GB    : Speed: 17.74 MH/s (Samsung)
Zotac 1050 Ti 4 GB    : Speed: 17.74 MH/s (Samsung)


Algo:Skunk

Gigabyte GTX 1060 3 GB: Speed: 17.49 MH/s (Samsung)
Gigabyte 1050 Ti 4 GB : Speed: 9.37  MH/s (Hynix)
Gigabyte 1050 Ti 4 GB : Speed: 9.37  MH/s (Hynix)
Gigabyte 1050 Ti 4 GB : Speed: 9.37  MH/s (Hynix)
Zotac 1050 Ti 4 GB    : Speed: 9.46  MH/s (Samsung)
Zotac 1050 Ti 4 GB    : Speed: 9.46  MH/s (Samsung)



And my 780Ti, GTX 770 can not run the program


Thank you for your program sir

Current means not yet solved I guess.

yeah water cooled =P

Just a cosmetic issue: in the main screen, current block number looks +1.

Indeed!

Are you using afterburner?
My 1070 max is 30 mh/s.

hi all,

i want to join this cwi... and already sent a pm...
i hope have a good result.
thanks...

world record for 1070?

CPU:   0%          ChainWorks Industries beta - Version 0.9.8         [16:40:16]
Algo:Skunk      | Port: 2000 | NetDiff: 41968.2            | Block:      29964 |
Coin:signatum   | POW: 2500  | Estimated coins/day: 04.827                     |
Solved: 25.4615iff:        0 | Shares: 4.5     | Rej: 0%   | Speed:    3.050H/s|
0.MSI GTX 1070               : Shares: 4.5     | Rej: 0    | Speed:   33.38MH/s|


https://i.gyazo.com/93044ac6ff2ea254512746a647cb1b67.png

for first: sorry for my english.

gpu's: 6x GTX Titan Xp
drivers: 385.12 beta

default bat for sigt

first start was with PL 100%, core +150, mem -500 :  driver was crashed in few seconds

second start was with PL 100%, core stock, mem stock : rig was crashed in about 4 minutes

hmm... like as ewbf in past

ok, PL 87%, core stock, mem stock : rig stable about 10 min

next, PL87%, core +150, mem stock: rig stable

intensity as auto is 21

add -i 25 to bat and run - rig stable already 30 min

http://roenko.ru/img/miner.png

what is missing: remote monitoring, like as EWBF 0.3.4b.
 

Hi all, just started using CwiGm.

Up to now, I can tell it looks faster than ccminer palgin mod 1.1 (my previous and favourite miner), that was already a lot faster than tpruvot ccminer 2.2 (with skunkhash algo).
It also looks a little more power consuming though.


My stats:

--------------------------------------------------------------------------------
Speed:  133.07MH/s
--------------------------------------------------------------------------------
0.MSI GTX 1080 Ti            Speed:   52.89MH/s
1.Zotac GTX 1060 6GB      Speed:   20.06MH/s
2.ASUS GTX 1070             Speed:   30.31MH/s
3.Zotac GTX 1070             Speed:   29.41MH/s
--------------------------------------------------------------------------------
0.MSI GTX 1080 Ti            : T:74C | F:76% | P:258W | I: 25.0 | Core:1851Mhz |
1.Zotac GTX 1060 6GB         : T:71C | F:40% | P:109W | I: 25.0 | Core:1975Mhz |
2.ASUS GTX 1070              : T:73C | F:53% | P:147W | I: 25.0 | Core:1947Mhz |
3.Zotac GTX 1070             : T:73C | F:52% | P:143W | I: 25.0 | Core:1903Mhz |
--------------------------------------------------------------------------------
Scan time: 30s | DCs: 0 | User:  | Conn:0d 00:01:45 | Latency:55ms


I use Afterburner to tweak my GPUs:
- GTX 1060 6G: +125 core, +500 mem.
- GTX 1070 8G: +150 core, +500 mem.
- GTX 1080ti 11G: +0 core, +500 mem.


My current command line: -c sigt -lodiff -i 25 -u weblogin.worker

And we just hit a couple blocks in the last 30 mins, so everything is good with the pool Bad thing that halfing is just in 3 hours...

https://i.imgur.com/SkEN1tw.png

1080s at 72% tdp

https://i.imgur.com/yYLSVgX.png

1080ti at 70% tdp, stabilized at 50mh/s

all improvements over spmod3! 

Its been almost 4 hours without the pool hitting a block. The pool should hit the block about every 70-80 minutes with the current hashrate. The last two hours before the last block the pool hit 5 blocks which was great, so its normal to be little dry now. For the last 24 hours it hit 25 blocks which was great because half of that time the pool was with almost twice less hashrate. I hope we will start hitting blocks again very soon. If it goes more than 6 -7 hours without a block we can speak about a problem but i doubt it will get to that.

Does anyone know which android app can be used to monitor pool with the QR code provided?