Hello everyone,
I am totally newbie for all of this. I have the Sapphire RX580 Nitro + Special Edition 8Gb SAMSUNG memory cards. I have the Win10 OS, I have put the BIOS plug on the card in position for flashing (also saved the original ROM), installed Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Vorkloads-Aug23 drivers, used the atikmdag-patcher and in the MSI Afterburner set: CoreVoltage -162, LImit -20 Power, Core Clock 1152, Memories Clock 2250 and with these settings I get only 27.4Mh / s per card (now I have three cards).
Anyway, I tried to flash bios with some suggested straps, like putting this: 777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
to 2: 1750 2: 2000 and 2: 2500 - but there is no change in Mh /s. Which ever I have tried, it's always 27.4Mh /s ! (of course, there were some fallss in the attempts to use different drivers, not using afterburner ... and all the other things you can imagine someone new would try to do)
I've read that my cards should have at least 30Mh / s. Can someone help me?
Thanks in advance!
Topic: AMD Rebrand - RX570 / RX580 - Official Thread - page 3. (Read 173461 times)
Hey guys!
I finally set up my first AMD rig with 4 RX580's (8Gb). I only had nVidias until now.
I have a question regarding dual mining.
Right now, I'm running Claymore, dual mining ETH + DCR. I'm getting pretty good hashrates, around 30Mh ETH/ 900Mh DCR per card (120Mh/3600MH total and undervolted to 850mv) however on DCR.suprnova I'm having a much lower balance than I should. According to whattomine I should be getting 0.037 DCR after 24 hrs, but I had only 0.311 DCR after running it for 25 hrs straight.
Right now, after 48 hrs I have like only 0.06DCR (instead of 0.075). That's 20% less than I should be getting. Way too much difference.
I do have a few rejected shares like 1% - 1,5% but the difference still seems too much!
Do you know if suprnova DCR pool is reliable? Am I missing something? Maybe you guys know a better DCR pool?
Or maybe I should just forget dual mining DCR and go for Lbry or SIA instead? (DCR seems convinient bcs impact on ETH hashrate is minimal).
What say you?
I finally set up my first AMD rig with 4 RX580's (8Gb). I only had nVidias until now.
I have a question regarding dual mining.
Right now, I'm running Claymore, dual mining ETH + DCR. I'm getting pretty good hashrates, around 30Mh ETH/ 900Mh DCR per card (120Mh/3600MH total and undervolted to 850mv) however on DCR.suprnova I'm having a much lower balance than I should. According to whattomine I should be getting 0.037 DCR after 24 hrs, but I had only 0.311 DCR after running it for 25 hrs straight.
Right now, after 48 hrs I have like only 0.06DCR (instead of 0.075). That's 20% less than I should be getting. Way too much difference.
I do have a few rejected shares like 1% - 1,5% but the difference still seems too much!
Do you know if suprnova DCR pool is reliable? Am I missing something? Maybe you guys know a better DCR pool?
Or maybe I should just forget dual mining DCR and go for Lbry or SIA instead? (DCR seems convinient bcs impact on ETH hashrate is minimal).
What say you?
Do not use Whattomine as an absolute guide to what you will get, it is just giving you a snap-shot of what you might get at that particular moment in time. Factors such as changing difficulty, blocks found, pool luck, etc will all have an effect on your returns. I use Whattomine just as a guide and a comparison between algols to determine what I should mine.
Hey guys!
I finally set up my first AMD rig with 4 RX580's (8Gb). I only had nVidias until now.
I have a question regarding dual mining.
Right now, I'm running Claymore, dual mining ETH + DCR. I'm getting pretty good hashrates, around 30Mh ETH/ 900Mh DCR per card (120Mh/3600MH total and undervolted to 850mv) however on DCR.suprnova I'm having a much lower balance than I should. According to whattomine I should be getting 0.037 DCR after 24 hrs, but I had only 0.311 DCR after running it for 25 hrs straight.
Right now, after 48 hrs I have like only 0.06DCR (instead of 0.075). That's 20% less than I should be getting. Way too much difference.
I do have a few rejected shares like 1% - 1,5% but the difference still seems too much!
Do you know if suprnova DCR pool is reliable? Am I missing something? Maybe you guys know a better DCR pool?
Or maybe I should just forget dual mining DCR and go for Lbry or SIA instead? (DCR seems convinient bcs impact on ETH hashrate is minimal).
What say you?
I finally set up my first AMD rig with 4 RX580's (8Gb). I only had nVidias until now.
I have a question regarding dual mining.
Right now, I'm running Claymore, dual mining ETH + DCR. I'm getting pretty good hashrates, around 30Mh ETH/ 900Mh DCR per card (120Mh/3600MH total and undervolted to 850mv) however on DCR.suprnova I'm having a much lower balance than I should. According to whattomine I should be getting 0.037 DCR after 24 hrs, but I had only 0.311 DCR after running it for 25 hrs straight.
Right now, after 48 hrs I have like only 0.06DCR (instead of 0.075). That's 20% less than I should be getting. Way too much difference.
I do have a few rejected shares like 1% - 1,5% but the difference still seems too much!
Do you know if suprnova DCR pool is reliable? Am I missing something? Maybe you guys know a better DCR pool?
Or maybe I should just forget dual mining DCR and go for Lbry or SIA instead? (DCR seems convinient bcs impact on ETH hashrate is minimal).
What say you?
I'm set direct in bios
Edit my cards are 580 not 480 like yours.
Are you sure it works via the bios editing? I edit the voltage for all my cards in BIOS as well. But as far as I know, the polaris cards can't run with the core voltage lower than the memory controller voltage. So you might flash 887mv for the core voltage, and 950mv for the memory controller, but your core will be still supplied with 950mv as well. Which is quite possible, actually, considering how your 580/4 draws 130W on cryptonight. That's too much for 887mv, none of my 480/4 draw more than 100W on cryptonight, and they all run at 0.9V. And 480 and 580 cards are almost identical for the most part. Edit my cards are 580 not 480 like yours.
You can check it in GPU-Z, just look at the voltage in there, there's a chance that your core is not running @ 887mv but is @ 950mv. At least that's how it was with 470/480 cards, I don't know, maybe they changed it with 570/580. It used to be possible to set the core voltage lower than the mem. controller voltage with WattTool via an offset. But it only worked with some cards.
you are right in gpuz its show 939mv.
Actually, only 1 card was installed. 
That's a great result then, looks like 570s are noticeably more efficient in ETH than 580s. If you tried cryptonight with them, how many H/s do you get? Didn't try cryptonote yet. Will do it later and give you the results.
EDIT: 869 h/s per card @ 319W from the wall total
I can concur that your results are valid - dual-mining eth and dcr with 29.6 and 500ish dcr only takes 135w per card.
My results are 1250w for 8x Nitro+ 580s dual-mining but I get 30.3 for eth and 750 dcr. My system idles at 53w without any GPUs plugged in. That means I consume 150w at the wall per card.
You might have your -dcri settings to around 15 or 20 thus the lower power consumption.
Yes, I got -dcri set to 20
I got 880Hs stable on Sapphire RX580 Nitro+ 4GB whit biosmod memshift 1750, core 1150@887, mem 2000@950 about 130w per card
1800~1900Hs XFX Vega 56@64 Bios Core 1300@875, mem 1100@905 about 160W per card
412Hs stable Sapphire Pulse RX560 2GB mShift 1500 core 1050, mem 1750 whitout voltage mod
Using Zawawawa GateLessGate (command line version 0.1.3-pre6b-win64) o secret in this miner is use 2 threads
for AMD cards.
1800~1900Hs XFX Vega 56@64 Bios Core 1300@875, mem 1100@905 about 160W per card
412Hs stable Sapphire Pulse RX560 2GB mShift 1500 core 1050, mem 1750 whitout voltage mod
Using Zawawawa GateLessGate (command line version 0.1.3-pre6b-win64) o secret in this miner is use 2 threads
for AMD cards.I have XFX rx 580 8gb. Do you think this mod will work for them?
Halo can someone help me?
I want to undervolt my GPU but still locked on MSI Afterburner
On setting has been unlocked
This is my GPU
I Using RX 570 Dataland with Hynix Memory
I Modded bios without OC, using mod bios from https://anorak.tech/t/dataland-rx-570-4gb-hynix/26553
Cryptonight : 780 H/s
Ethash : 27 MH/s
why won't you just decrease the power limit ? are you using latest msi afterburner ? I want to undervolt my GPU but still locked on MSI Afterburner
On setting has been unlocked
This is my GPU
I Using RX 570 Dataland with Hynix Memory
I Modded bios without OC, using mod bios from https://anorak.tech/t/dataland-rx-570-4gb-hynix/26553
Cryptonight : 780 H/s
Ethash : 27 MH/s
Halo can someone help me?
I want to undervolt my GPU but still locked on MSI Afterburner
On setting has been unlocked
This is my GPU
I Using RX 570 Dataland with Hynix Memory
I Modded bios without OC, using mod bios from https://anorak.tech/t/dataland-rx-570-4gb-hynix/26553
Cryptonight : 780 H/s
Ethash : 27 MH/s
I want to undervolt my GPU but still locked on MSI Afterburner
On setting has been unlocked
This is my GPU
I Using RX 570 Dataland with Hynix Memory
I Modded bios without OC, using mod bios from https://anorak.tech/t/dataland-rx-570-4gb-hynix/26553
Cryptonight : 780 H/s
Ethash : 27 MH/s
I'm set direct in bios
Edit my cards are 580 not 480 like yours.
Are you sure it works via the bios editing? I edit the voltage for all my cards in BIOS as well. But as far as I know, the polaris cards can't run with the core voltage lower than the memory controller voltage. So you might flash 887mv for the core voltage, and 950mv for the memory controller, but your core will be still supplied with 950mv as well. Which is quite possible, actually, considering how your 580/4 draws 130W on cryptonight. That's too much for 887mv, none of my 480/4 draw more than 100W on cryptonight, and they all run at 0.9V. And 480 and 580 cards are almost identical for the most part. Edit my cards are 580 not 480 like yours.
You can check it in GPU-Z, just look at the voltage in there, there's a chance that your core is not running @ 887mv but is @ 950mv. At least that's how it was with 470/480 cards, I don't know, maybe they changed it with 570/580. It used to be possible to set the core voltage lower than the mem. controller voltage with WattTool via an offset. But it only worked with some cards.
I got 880Hs stable on Sapphire RX580 Nitro+ 4GB whit biosmod memshift 1750, core 1150@887, mem 2000@950 about 130w per card
Does your card support the core voltages lower than the memory controller voltage? None of my Nitro 480 cards support it, though I've heard some people made it work with WattTool (but the offset setting was never functioning for any of my cards, except a couple gigabyte 470s). And these days, I don't even see the offset options in overdriventool. How do you do it?I'm set direct in bios
Edit my cards are 580 not 480 like yours.
I got 880Hs stable on Sapphire RX580 Nitro+ 4GB whit biosmod memshift 1750, core 1150@887, mem 2000@950 about 130w per card
Does your card support the core voltages lower than the memory controller voltage? None of my Nitro 480 cards support it, though I've heard some people made it work with WattTool (but the offset setting was never functioning for any of my cards, except a couple gigabyte 470s). And these days, I don't even see the offset options in overdriventool. How do you do it?
I got 880Hs stable on Sapphire RX580 Nitro+ 4GB whit biosmod memshift 1750, core 1150@887, mem 2000@950 about 130w per card
1800~1900Hs XFX Vega 56@64 Bios Core 1300@875, mem 1100@905 about 160W per card
412Hs stable Sapphire Pulse RX560 2GB mShift 1500 core 1050, mem 1750 whitout voltage mod
Using Zawawawa GateLessGate (command line version 0.1.3-pre6b-win64) o secret in this miner is use 2 threads for AMD cards.
1800~1900Hs XFX Vega 56@64 Bios Core 1300@875, mem 1100@905 about 160W per card
412Hs stable Sapphire Pulse RX560 2GB mShift 1500 core 1050, mem 1750 whitout voltage mod
Using Zawawawa GateLessGate (command line version 0.1.3-pre6b-win64) o secret in this miner is use 2 threads
for AMD cards. Didn't try cryptonote yet. Will do it later and give you the results.
EDIT: 869 h/s per card @ 319W from the wall total
That's some cool cards you've got! EDIT: 869 h/s per card @ 319W from the wall total
Memory made by Samsung? Did you pay for the timings you're using or are those some freely available ones? Actually, only 1 card was installed.
That's a great result then, looks like 570s are noticeably more efficient in ETH than 580s. If you tried cryptonight with them, how many H/s do you get? Didn't try cryptonote yet. Will do it later and give you the results.
EDIT: 869 h/s per card @ 319W from the wall total
I can concur that your results are valid - dual-mining eth and dcr with 29.6 and 500ish dcr only takes 135w per card.
My results are 1250w for 8x Nitro+ 580s dual-mining but I get 30.3 for eth and 750 dcr. My system idles at 53w without any GPUs plugged in. That means I consume 150w at the wall per card.
You might have your -dcri settings to around 15 or 20 thus the lower power consumption.
Actually, only 1 card was installed.
That's a great result then, looks like 570s are noticeably more efficient in ETH than 580s. If you tried cryptonight with them, how many H/s do you get? Didn't try cryptonote yet. Will do it later and give you the results.
EDIT: 869 h/s per card @ 319W from the wall total
Actually, only 1 card was installed.
That's a great result then, looks like 570s are noticeably more efficient in ETH than 580s. If you tried cryptonight with them, how many H/s do you get? Who said i got "modern" system for mining? I shared my results.. Are u mad at me now that i got to this point?
Why would I be mad at you? 
It's just you didn't explain the way you measured your "idle" consumption so I assumed it was measured with the GPUs installed in the system, just like most people do it.Actually, only 1 card was installed.
U got me :p Hello
(1) I have a sapphire rx 580 nitro+ 8gb,I attached it 8 pin and 6 pin power supply.
Will the consumption decrease if I turn it off 6 pin power cable?
(2) My rig 6x sapphire rx 580 nitro+ 8gb solo eth mining 181+mh, spends from wall 930w power consumption.
GPU Clock: 1125 Memory Clock: 2150, i undervolt in bios cvddc 950 -mvddc 950 and msi ab core voltage -25, and voltage on 6 gpu is 0.9063
Everything works stable, but I read that almost all 6 gpu consumes about 850w.
(1) I have a sapphire rx 580 nitro+ 8gb,I attached it 8 pin and 6 pin power supply.
Will the consumption decrease if I turn it off 6 pin power cable?
(2) My rig 6x sapphire rx 580 nitro+ 8gb solo eth mining 181+mh, spends from wall 930w power consumption.
GPU Clock: 1125 Memory Clock: 2150, i undervolt in bios cvddc 950 -mvddc 950 and msi ab core voltage -25, and voltage on 6 gpu is 0.9063
Everything works stable, but I read that almost all 6 gpu consumes about 850w.
(1) No. There is the fundamental principal of supply and demand at work here, the GPU demands, say, 100Watts and the PSU has to supply 100 Watts. It does not matter how many wires are connected, but the extra connections will be needed if the GPU demands more power.
(2) It is not only the GPU taking power, the CPU, Motherboard, RAM, SSD all need to be powered, this may account for about 100 Watts or so.
Also, if you are using powered risers these can take about 75 Watts each, so it all adds up.
Getting a 6 GPU rig to mine Ether at 850 Watts would be amazing, I was lucky to get my 6 rig RX580/RX480 rig to take less than 1000 Watts.
EDIT: If you want to reduce your power consumption mine a Cryptonote coin, such as Monero or Sumokoin, you will get between 25% to 30% less power consumption.
I'm taking 29.8 mh/s at rx 570 sapphire nitro+ on Dual mining with 130W per card...
130w from wall? What is the voltage on gpu? GPU Clock? and Memory Clock?
130W from the wall. I'm mining with 3 gpu cards. Numbers on voltage meter says : 491,3W. System idle = 85W. So that gets me to 135W per card on dual minig.
Can you tell me what voltage is on gpu?Here u go. https://www.youtube.com/watch?v=Nnjh-zp6pP4
https://prnt.sc/herv30
ahahahah
tnx bro Who said i got "modern" system for mining? I shared my results.. Are u mad at me now that i got to this point?
Why would I be mad at you? It's just you didn't explain the way you measured your "idle" consumption so I assumed it was measured with the GPUs installed in the system, just like most people do it. 130W from the wall. I'm mining with 3 gpu cards. Numbers on voltage meter says : 491,3W. System idle = 85W. So that gets me to 135W per card on dual minig.
85W is your system's idle with 3 cards. Most modern systems themselves take 30-50W at most (with c1e etc enabled), so your cards under load take about 450W in total => 150W per card in the end. Still pretty good though.Who said i got "modern" system for mining? I shared my results.. Are u mad at me now that i got to this point?
Jump to: