AMD Rebrand - RX570 / RX580 - Official Thread - page 33.

papi92

jr. member

Activity: 59

Merit: 1

Quote from: crypsy on May 20, 2017, 11:23:15 AM

Hello , i have Sapphire RX 580 Pulse 4GB Hynix memory and it looks like I am the only one that have them . i`m looking for modified bios or straps. 2:1750 to 2000 does nothing .
24.5mh stock which is nice , but 28-29 sound better .
Any help or advice please

Hi! I have 6 pcs from this card. Today I tried to mdoify bios and bricked one of the cards. I am with Hynix and I havn't 2:1750. My timings are very strange: 21645256, 3355496, 3361497 and etc (look these pictures).

Now it mining with 24.7 Mh/s ETH and 730 Mh/s SC.

Motherboard: Gygabite H81M-DS2
CPU: G1840
RAM: 4GB 1600 Kingston
SSD: Samsung EVO 840 120GB
PSU: Cooler Master GX650
DRV: 17.4.3 with copied WT6A_INF from 16.9.1
Stock clocks and -60mV

Do you know some way ti unbrick? Which is the best drivers at the moment for these cards? Why I change clocks performance is bad than stock?

Thank you!

arbenowskee

newbie

Activity: 15

Merit: 0

Quote from: crypsy on May 20, 2017, 03:12:38 PM

Quote from: arbenowskee on May 20, 2017, 01:27:14 PM

Quote from: crypsy on May 20, 2017, 11:23:15 AM

Hello , i have Sapphire RX 580 Pulse 4GB Hynix memory and it looks like I am the only one that have them . i`m looking for modified bios or straps. 2:1750 to 2000 does nothing .
24.5mh stock which is nice , but 28-29 sound better .
Any help or advice please

copy 2:1500 to 2:1750, 2:2000, 2:2250.

for reference use 1200/2050/920 (GPU, memory, GPU voltage).

Than tune cards, until you get results you like (hash rate and power usage). Just turn on the HW monitor and watch for memory errors. Not all cards are created the same and some do 30 MH/s on less than 800 mV. And some can produce memory errors even at 2050.

with these settings I get about 29 MH/s per card when dual mining. Also play with -dcri setting if you are using claymore. It can change the result quite dramatically.

Hi , thanks for the help , but I don't have straps like these .what I have is 2:1500 to 2:1625, 2:1750, 2:2000. should I copy the 2:1500 over 2:1625, 2:1750, 2:2000?

yeah, that is what I did. I spat those number out of my head =)

crypsy

full member

Activity: 216

Merit: 101

Quote from: Mattthev on May 20, 2017, 01:08:40 PM

Quote from: crypsy on May 20, 2017, 11:23:15 AM

Hello , i have Sapphire RX 580 Pulse 4GB Hynix memory and it looks like I am the only one that have them . i`m looking for modified bios or straps. 2:1750 to 2000 does nothing .
24.5mh stock which is nice , but 28-29 sound better .
Any help or advice please

http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx

thanks. i find this quite helpful and interesting

crypsy

full member

Activity: 216

Merit: 101

Quote from: arbenowskee on May 20, 2017, 01:27:14 PM

Quote from: crypsy on May 20, 2017, 11:23:15 AM

Hello , i have Sapphire RX 580 Pulse 4GB Hynix memory and it looks like I am the only one that have them . i`m looking for modified bios or straps. 2:1750 to 2000 does nothing .
24.5mh stock which is nice , but 28-29 sound better .
Any help or advice please

copy 2:1500 to 2:1750, 2:2000, 2:2250.

for reference use 1200/2050/920 (GPU, memory, GPU voltage).

Than tune cards, until you get results you like (hash rate and power usage). Just turn on the HW monitor and watch for memory errors. Not all cards are created the same and some do 30 MH/s on less than 800 mV. And some can produce memory errors even at 2050.

with these settings I get about 29 MH/s per card when dual mining. Also play with -dcri setting if you are using claymore. It can change the result quite dramatically.

Hi , thanks for the help , but I don't have straps like these .what I have is 2:1500 to 2:1625, 2:1750, 2:2000. should I copy the 2:1500 over 2:1625, 2:1750, 2:2000?

stef_stef

full member

Activity: 144

Merit: 100

Guys, I know there was a problem with the driver that did not allow more than 4 cards to run on one mobo. I have seen the tutorial for the fix, but I was wondering does it allow for 7 cards to run on one card? z170 or 270 in particular?

Would really appreciate an answer.

Thanks!

arbenowskee

newbie

Activity: 15

Merit: 0

Quote from: crypsy on May 20, 2017, 11:23:15 AM

Hello , i have Sapphire RX 580 Pulse 4GB Hynix memory and it looks like I am the only one that have them . i`m looking for modified bios or straps. 2:1750 to 2000 does nothing .
24.5mh stock which is nice , but 28-29 sound better .
Any help or advice please

copy 2:1500 to 2:1750, 2:2000, 2:2250.

for reference use 1200/2050/920 (GPU, memory, GPU voltage).

Than tune cards, until you get results you like (hash rate and power usage). Just turn on the HW monitor and watch for memory errors. Not all cards are created the same and some do 30 MH/s on less than 800 mV. And some can produce memory errors even at 2050.

with these settings I get about 29 MH/s per card when dual mining. Also play with -dcri setting if you are using claymore. It can change the result quite dramatically.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: crypsy on May 20, 2017, 11:23:15 AM

Hello , i have Sapphire RX 580 Pulse 4GB Hynix memory and it looks like I am the only one that have them . i`m looking for modified bios or straps. 2:1750 to 2000 does nothing .
24.5mh stock which is nice , but 28-29 sound better .
Any help or advice please

http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx

crypsy

full member

Activity: 216

Merit: 101

Hello , i have Sapphire RX 580 Pulse 4GB Hynix memory and it looks like I am the only one that have them . i`m looking for modified bios or straps. 2:1750 to 2000 does nothing .
24.5mh stock which is nice , but 28-29 sound better .
Any help or advice please

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: immortal02 on May 20, 2017, 03:46:24 AM

Im running asus RX 570s and can't seem to get them past 27.5mh/s even after modding the BIOS. Anyone on these cards able to get past 28mh/s?

These run on elpida memory and i modified the 1:1500 and 2 : 1500 straps

Read my post two lines above yours.
You can get 28 with slightly higher clocks.

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

5x570 msi armor and 1x asus strix on a msi z170a sli board, 900w dual mining, 160/1450mhs, win10. Not bad. I havent pushed them at all, core clocks are either 950/1050/1125 mem 1925 to 2000, 0.84v to 0.96v. I find 570s to be more resilient than 470s for some reason.

supaman

newbie

Activity: 13

Merit: 0

Quote from: oup59 on May 20, 2017, 03:20:23 AM

Quote from: supaman on May 19, 2017, 03:44:08 PM

I haven't had any experience with the 480s, but I will say it seems there was a lot more "work" to get the 570s and 580s working as well as people say the 4 series work. That being said, as irritating as it was and with the 2 days I lost tweaking, I would probably buy the 5 series again because it provided a good learning experience and in the end I ultimately got the same results. If you're in a rush to get started, the 4 series might be better, but if you want to learn more about getting your cards to optimal operation and understanding why people are recommending what they do, the 5 series may provide that with the learning it takes to get them running right.

Thanks for the feedback. Actually I am on the same page. Spending a couple of days for running and optimizing the rif Will be good experience. I will buy rx570s.

Which cards do you run for your rig?

Any advice on rx570/580 models?

There is probably specific information in one of the 570/580 threads on what is best, but I went with a couple Sapphire Radeon nitro+ 570s and a couple 580s of the same.

immortal02

newbie

Activity: 11

Merit: 0

Im running asus RX 570s and can't seem to get them past 27.5mh/s even after modding the BIOS. Anyone on these cards able to get past 28mh/s?

These run on elpida memory and i modified the 1:1500 and 2 : 1500 straps

oup59

sr. member

Activity: 382

Merit: 251

Quote from: supaman on May 19, 2017, 03:44:08 PM

I haven't had any experience with the 480s, but I will say it seems there was a lot more "work" to get the 570s and 580s working as well as people say the 4 series work. That being said, as irritating as it was and with the 2 days I lost tweaking, I would probably buy the 5 series again because it provided a good learning experience and in the end I ultimately got the same results. If you're in a rush to get started, the 4 series might be better, but if you want to learn more about getting your cards to optimal operation and understanding why people are recommending what they do, the 5 series may provide that with the learning it takes to get them running right.

Thanks for the feedback. Actually I am on the same page. Spending a couple of days for running and optimizing the rif Will be good experience. I will buy rx570s.

Which cards do you run for your rig?

Any advice on rx570/580 models?

dragonmike

hero member

Activity: 1274

Merit: 556

@asusminer: Check out Anorak's vbios collection, it's a good start:
https://anorak.tech/t/anoraks-vbios-collection-optimized-settings-for-performance-power-saving/13

Ravec

newbie

Activity: 9

Merit: 0

Sapphire Radeon Rx580 Pulse 8gb hynix, dual mining ETH+DCR with claymore's

http://imgur.com/Sc9EoxZ

dzcaesar

newbie

Activity: 7

Merit: 0

guys, anyone using mix of 470 and 570/580 ?
is it stable for all six cards ?

i had a rig that have 4x470, im planning to add 2x570/580..

asusminer

newbie

Activity: 1

Merit: 0

Quote from: dragonmike on May 18, 2017, 11:47:28 AM

Quote from: Marvell1 on May 18, 2017, 11:43:49 AM

Quote from: INFINITE MINING CORP on May 18, 2017, 10:53:26 AM

Does somebody know any thing about the XFX RX570 ??

Hash Rates ? Memory Cock data to overclock?

https://www.amazon.co.uk/XFX-Radeon-GDDR5-DVI-D-Graphics/dp/B06ZZGJBMW

need some informations about that Card

its junk elphida memorry 1500 straps unstable even at 1900 mem

I've got 14 Asus RX 570 Expedition OC with junk Elpida ram hashing at 28 Mh/s each rock stable. 1266/1925. Not extremely efficient but I've got a good deal on electricity currently so I don't care! Cheesy

Is there a way, we could get more info about that OC?

Which straps are you using? Memory voltage? Current power consumption? Any additional related info?

Wasted a couple of days triing to OC Asus Strix 570. Not much luck sofar Sad

. 1500 straps--> unstable 1600 straps --> unstable..... Any recomendations?

error5404

newbie

Activity: 6

Merit: 0

Quote from: chudm on May 19, 2017, 04:17:28 PM

can this strap be used on any hynix card? (470-480-570-580)

Just try it and report Grin

botarnold

newbie

Activity: 53

Merit: 0

Quote from: Teress on May 19, 2017, 10:36:36 AM

Quote from: botarnold on May 19, 2017, 08:35:43 AM

3 Msi Armor 580's came and Ive tested them with these results. All 3 has samsung memory.

Out of the box 24.5mh

Using the 1:1750 strap:
1200/2200 30.2mh 10k gpu mem error/min 85W(GPUZ)
1200/2250 30.8mh 50k gpu mem error/min 85W(GPUZ)

Miner has been stable for running 12 hours 2200mh memclock.

Nice, but those memory errors are not good.

Those memory error only occured on the main gpu card. The second card even at 2250mhz have no errors at all.

Is it normal to turn on crossfire to mine on both cards? Without crossfire the second GPU will stuck at 300mhz clock and memory.

Mining on two cards with crossfire actually slowed the first gpu down from 30 to 27 while second mines at 30. while they both have been tested to mine at 30 single card.

chudm

newbie

Activity: 59

Merit: 0

Quote from: supaman on May 18, 2017, 09:36:07 PM

Quote from: error5404 on May 11, 2017, 01:53:07 PM

RX580 Sapphire Nitro+ 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx
RX580 Sapphire Pulse 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx

Maybe not all cards can be undervolted -75mv OR maybe more then -75mv

Strap copied to 2:1750, 2:2000, 2:2250:
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
here is a blank, check you copy all without the blank (forum changes it?)

ETH: 30.1 - 30.3 - 100% Stable, 0 Errors, about 2 weeks

Long time i tried bios mods and many other memory straps, this one is the only working flawless with 30 MHs.
Other straps got me lower MH on memory overclock or blackscreens and artefacts

My man! Struggled with my 580s with Hynix...always locking up , lower hashrates or some other issue. This one did it. Thanks!

can this strap be used on any hynix card? (470-480-570-580)

Topic: AMD Rebrand - RX570 / RX580 - Official Thread - page 33. (Read 173461 times)