Topic: AMD Releases Driver for DAG Issue !!! - page 12. (Read 28841 times)
god
I have 4 gigabyte 570's. I have been dual mining dcri 30. Each card registers about 110 watts in hwinfo. I tried these drivers. My cards were over 160 watts in hwinfo. Even then the memory keeps dropping from 1999 to 1000. So I use 50 watts more but end up with a slower hashrate. Same memory drop problem was happing on my 6 gpu 470/480 Saffire rig. That was using robinhoods beta. I tried undervolting on these drivers. Unfortnattlly, my gpu will not stay stable unvolted or not. If I was able to increase the power limit that may fix it. Then I would be pulling over 50 watts more a card for a 2 mhs increase. I understand higher hash needs more power. That is just not worth it to me.
I will try eth only on my 470/480 rig tomorrow. Those do not mine dcr very high anyway. So they increase in eth might be worth it. Hopefully, I can undervolt those some.
I will try eth only on my 470/480 rig tomorrow. Those do not mine dcr very high anyway. So they increase in eth might be worth it. Hopefully, I can undervolt those some.
What a good improvement, I hope nvidia will do something like that.
Actually, they have.
The latest 385.28 drivers released 2 days ago (Aug. 14) have added a "slight bump" in hash rates across most Nvidia GPUs.
Source:
https://www.reddit.com/r/EtherMining/comments/6tn65a/nvidia_38528_drivers_out_slight_bump_in_mhsec/
2 idiots on reddit saying they saw improvement isnt really proof that this driver does anything new.
What a good improvement, I hope nvidia will do something like that.
Actually, they have.
The latest 385.28 drivers released 2 days ago (Aug. 14) have added a "slight bump" in hash rates across most Nvidia GPUs.
Source:
https://www.reddit.com/r/EtherMining/comments/6tn65a/nvidia_38528_drivers_out_slight_bump_in_mhsec/
I can confirm I pretty much got back my hashrate I had from the begining, Great job from AMD!
I am running a rx480 no bios mod
Best regards
Harry
I am running a rx480 no bios mod
Best regards
Harry
Thanks!
How do you install the 8x570? Only 4 video cards can be identified
7x480 rig went from 186MHs to 203MHs.
Remove drivers in safe mode with DDU.
Restart
Install new drivers.
Restart
Patch with pixel patcher
Restart
Install the beta release of Afterburner, overclock
Run miner.
Remove drivers in safe mode with DDU.
Restart
Install new drivers.
Restart
Patch with pixel patcher
Restart
Install the beta release of Afterburner, overclock
Run miner.
Does this fix the DAG issue for the 7970/280X GPUS also?
280x should be like 27MH/s
280x should be like 27MH/s
omg thank youuuuuu
win 8mh/s in one rx470 rig and 9 in one bastard rig
mix rx 570 and rx580 various brands.
and i feel both more cold than before, one of rx570 can mine in eth+dcr now, before this fix impossible, so much hot.
Regards,
win 8mh/s in one rx470 rig and 9 in one bastard rig
mix rx 570 and rx580 various brands.and i feel both more cold than before, one of rx570 can mine in eth+dcr now, before this fix impossible, so much hot.
Regards,
The driver version robinhood shared is 22.19.659.0 and 22.19.659.1. So it was legit after all.
Can confirm after DDU X2 (clean install, TWICE) fan controls and every single option works VIA CCC.
good job AMD.
good job AMD.
What a good improvement, I hope nvidia will do something like that.
nvidia don't have a problem with the dag size
Nice, they did something for miners!
What a good improvement, I hope nvidia will do something like that.
yes that is still the case with a modded bios
also,
afterburner (beta) is having major issues with this driver ATM.
I can confirm though that the DAG issue has been resolved with RX 480 with this driver...
But cannot control fan speed or much of anything through 4.4.0 afterburner. I am going to try setting with Claymore next.
also,
afterburner (beta) is having major issues with this driver ATM.
I can confirm though that the DAG issue has been resolved with RX 480 with this driver...
But cannot control fan speed or much of anything through 4.4.0 afterburner. I am going to try setting with Claymore next.
Beta 16 works fine for 580.
Is there any improvement for ZEC?
yes that is still the case with a modded bios
also,
afterburner (beta) is having major issues with this driver ATM.
I can confirm though that the DAG issue has been resolved with RX 480 with this driver...
But cannot control fan speed or much of anything through 4.4.0 afterburner. I am going to try setting with Claymore next.
also,
afterburner (beta) is having major issues with this driver ATM.
I can confirm though that the DAG issue has been resolved with RX 480 with this driver...
But cannot control fan speed or much of anything through 4.4.0 afterburner. I am going to try setting with Claymore next.
is voltage adjusting working in Af beta 16 with this drivers? With that unofficial driver changing vgpu did't had any effect.
dipping to 22 from 30Mh/s isn't normal.
Benchmarks are synthetic figures, variations are normal when running the same test. The stable hash was the same in all the tests and the real mining hash from the current ETH epoch 138 to the UBIQ epoch 6 was also the same.
ETH
UBIQ
Jump to: