AMD Releases Driver for DAG Issue !!! - page 13.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: P00P135 on August 15, 2017, 04:51:33 PM

dipping to 22 from 30Mh/s isn't normal.

Benchmarks are synthetic figures, variations are normal when running the same test. The stable hash was the same in all the tests and the real mining hash from the current ETH epoch 138 to the UBIQ epoch 6 was also the same.

ETH

UBIQ

anders31

newbie

Activity: 53

Merit: 0

Quote from: Vann on August 15, 2017, 04:46:50 PM

Quote from: anders31 on August 15, 2017, 04:17:20 PM

Quote from: Vann on August 15, 2017, 04:12:14 PM

5 card ETH rig went from ~139 MH/s ====> ~146 MH/s
5 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue!

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

try -benchmark 140 or -benchmark 150 on your clymore miner and tell us the results please

I ran the benchmarks from epoch 150, 180 and 199 (the highest Claymore will let you benchmark). Stable hash rate was virtually identical except for some fluctuations which is normal.

Epoch 150:

Epoch 180

Epoch 199

thnx for your effort i will try it on my rig also

vodzilla

newbie

Activity: 7

Merit: 0

any link for ubuntu(amdgpu-pro)

P00P135

full member

Activity: 1123

Merit: 136

dipping to 22 from 30Mh/s isn't normal.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: anders31 on August 15, 2017, 04:17:20 PM

Quote from: Vann on August 15, 2017, 04:12:14 PM

5 card ETH rig went from ~139 MH/s ====> ~146 MH/s
5 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue!

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

try -benchmark 140 or -benchmark 150 on your clymore miner and tell us the results please

I ran the benchmarks from epoch 150, 180 and 199 (the highest Claymore will let you benchmark). Stable hash rate was virtually identical except for some fluctuations which is normal.

Epoch 150:

Epoch 180

Epoch 199

P00P135

full member

Activity: 1123

Merit: 136

Quote from: kuttysark420 on August 15, 2017, 04:36:29 PM

drivers fucked my install up (did not do a full refresh, doing it now) 5x RX 480 8GB

I suggest wiping drivers completely before installing.

lWhy would you overwrite old drivers? This is just asking for trouble.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: KaydenC on August 15, 2017, 04:39:12 PM

Does modded bios work out of the box for this driver?

You need to use the pixel patcher to bypass the signature check. Otherwise you will get the Code 43 error in Device Manager.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: kuttysark420 on August 15, 2017, 04:36:29 PM

drivers fucked my install up (did not do a full refresh, doing it now) 5x RX 480 8GB

I suggest wiping drivers completely before installing.

You should always do a clean removal in safe mode using DDU before installing new drivers.

KaydenC

sr. member

Activity: 610

Merit: 265

Does modded bios work out of the box for this driver?

kuttysark420

newbie

Activity: 19

Merit: 0

drivers fucked my install up (did not do a full refresh, doing it now) 5x RX 480 8GB

I suggest wiping drivers completely before installing.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: doktor83 on August 15, 2017, 04:13:28 PM

Quote from: Vann on August 15, 2017, 04:12:14 PM

6 card ETH rig went from ~139 MH/s ====> ~146 MH/s
6 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue!

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

so when working, everything is same like with robinhood's driver.

I don't know, I didn't try that one. These show up as driver version 22.19.659.0 in Device properties.

anders31

newbie

Activity: 53

Merit: 0

Quote from: Vann on August 15, 2017, 04:12:14 PM

5 card ETH rig went from ~139 MH/s ====> ~146 MH/s
5 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue!

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

try -benchmark 140 or -benchmark 150 on your clymore miner and tell us the results please

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

That sounds promising, but did anybody find SDK for the Overdriven API??? We can make new WattTool for this driver.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Vann on August 15, 2017, 04:12:14 PM

6 card ETH rig went from ~139 MH/s ====> ~146 MH/s
6 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue!

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

so when working, everything is same like with robinhood's driver.

Orbolon

member

Activity: 77

Merit: 10

CoinCrate.net

Looks awesome, and is easier just to download it without doing any workarounds. Will see how it goes

P00P135

full member

Activity: 1123

Merit: 136

Quote from: doktor83 on August 15, 2017, 04:00:29 PM

i install on win7 before that ddu.
apply atikmdag patch.
reboot.
before going into windows, screen is black, and that's it.

Maybe its time to install free win10? Tongue

Vann

hero member

Activity: 1036

Merit: 606

5 card ETH rig went from ~139 MH/s ====> ~146 MH/s
5 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue!

I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks.

doktor83

hero member

Activity: 2548

Merit: 626