any one sell me some chc
I have 1200+ of them. Make me an offer.
Topic: [ANN] a new coin based on Litecoin - CHNCoin - page 6. (Read 181259 times)
where can i buy some?
EDIT: Oh, i was looking for CHN, didnt realise they call it CNC
EDIT: Oh, i was looking for CHN, didnt realise they call it CNC
Welcome to new multicoin pool.
http://www.coinmine.pw
Pool uses self-made software and its Beta testing phase now.
But everything should work fine.
Will be happy if you'll point some miners here.
0% mining fee during beta testing period!
Additional information: https://bitcointalksearch.org/topic/scrypt-scrypt-n-x11-40-coins-coinminepw-simple-and-effective-406178
http://www.coinmine.pw
Pool uses self-made software and its Beta testing phase now.
But everything should work fine.
- Stratum protocol
- VAR DIFFiculty
- Clean and fast interface!
- One registration and statistics for all pools
- Automatic payouts every 5 minutes
- No payout fees!
Will be happy if you'll point some miners here.
0% mining fee during beta testing period!
Additional information: https://bitcointalksearch.org/topic/scrypt-scrypt-n-x11-40-coins-coinminepw-simple-and-effective-406178
2 Bitcoin-hotep
3 messages above:
3 messages above:
Quote
Hi.
at least 2 exchanges:
Bter.com (This is Chinese exchange, but have full operational english version) - most active trade and large exchange volumes, have 3 trade pairs (CNC/CNY, CNC/BTC, CNC/LTC)
Cryptsy.com - moderate exange volumes, 1 trade pair (CNC/LTC)
at least 2 exchanges:
Bter.com (This is Chinese exchange, but have full operational english version) - most active trade and large exchange volumes, have 3 trade pairs (CNC/CNY, CNC/BTC, CNC/LTC)
Cryptsy.com - moderate exange volumes, 1 trade pair (CNC/LTC)
Thank you
what about a working blockexplorer?
Not yet...You can "vote" on my proposal add CHNCoin to CCE3 (CryptoCoin Explorer III):
https://bitcointalksearch.org/topic/m.3986109
2 Bitcoin-hotep
3 messages above:
3 messages above:
Quote
Hi.
at least 2 exchanges:
Bter.com (This is Chinese exchange, but have full operational english version) - most active trade and large exchange volumes, have 3 trade pairs (CNC/CNY, CNC/BTC, CNC/LTC)
Cryptsy.com - moderate exange volumes, 1 trade pair (CNC/LTC)
at least 2 exchanges:
Bter.com (This is Chinese exchange, but have full operational english version) - most active trade and large exchange volumes, have 3 trade pairs (CNC/CNY, CNC/BTC, CNC/LTC)
Cryptsy.com - moderate exange volumes, 1 trade pair (CNC/LTC)
What exchange can this coin be found on?
what about a working blockexplorer?
chncoin maybe is good coin
What exchange is this coin traded on?
Hi.at least 2 exchanges:
Bter.com (This is Chinese exchange, but have full operational english version) - most active trade and large exchange volumes, have 3 trade pairs (CNC/CNY, CNC/BTC, CNC/LTC)
Cryptsy.com - moderate exange volumes, 1 trade pair (CNC/LTC)
What exchange is this coin traded on?
***New CNC Mining Pool***
The pool features Proportional Payout, Getwork and Stratum support, and a low 0.75% Pool fee.
Site is http://CNC.bitezzemining.com/index.php
NEW MINER SETTINGS, PLEASE BE SURE TO UPDATE YOUR MINER!
Miner Settings:
URL: http://bitezzemining.com
Port:3305
The pool features Proportional Payout, Getwork and Stratum support, and a low 0.75% Pool fee.
Site is http://CNC.bitezzemining.com/index.php
NEW MINER SETTINGS, PLEASE BE SURE TO UPDATE YOUR MINER!
Miner Settings:
URL: http://bitezzemining.com
Port:3305
Let it die already.
Stop spamming please?It is resurrected, deal with it.
Necromancer!
Let it die already.
Stop spamming please?It is resurrected, deal with it.
This may actually get back on an exchange.
Remembered the old value, before the coin got stuck on high diff? Well... the diff algo is fixed by the last hardfork...
Bter is already on the updated client.Remembered the old value, before the coin got stuck on high diff? Well... the diff algo is fixed by the last hardfork...
As oc Cryptsy, I doubt they want to add it again
This may actually get back on an exchange.
Remembered the old value, before the coin got stuck on high diff? Well... the diff algo is fixed by the last hardfork...
Remembered the old value, before the coin got stuck on high diff? Well... the diff algo is fixed by the last hardfork...
Hello people.
I made a patch to CNC difficulty adjustment algorithm.
It'll be retargeting every block by a small percentage, just like in PPCoin and Novacoin.
If it's ok, the hard fork is planned for Oct 1. The previous update made 2 months ago planned a fork for block 60500, with current hasrate it would take years to reach.
I'll publish my repo later.
I made a patch to CNC difficulty adjustment algorithm.
It'll be retargeting every block by a small percentage, just like in PPCoin and Novacoin.
If it's ok, the hard fork is planned for Oct 1. The previous update made 2 months ago planned a fork for block 60500, with current hasrate it would take years to reach.
I'll publish my repo later.
Yes, block 60,500 is a crazy target, way too far off to be practical.
You will have to get places like Cryptsy, Bter, BigVern's pool, to run with it. All references to the source on the net point to the Chinese code and not your fork. Ideally you should try an PM the devs or at least the use CHNcoin on this forum let them know what you are doing.
Not sure if Oct 1st. is enough time for all that.
Yes, are these places the only ones? Can you provide the full list? I also know cryptocoinexplorer.
I'd need a a man with mining stuff to test the code on testnet. He'll need to build CNC from sources himself though (so linux is better). PM me if interested.
The fork time will be adjusted if needed
Thanks for the reply.
Hello people.
I made a patch to CNC difficulty adjustment algorithm.
It'll be retargeting every block by a small percentage, just like in PPCoin and Novacoin.
If it's ok, the hard fork is planned for Oct 1. The previous update made 2 months ago planned a fork for block 60500, with current hasrate it would take years to reach.
I'll publish my repo later.
I made a patch to CNC difficulty adjustment algorithm.
It'll be retargeting every block by a small percentage, just like in PPCoin and Novacoin.
If it's ok, the hard fork is planned for Oct 1. The previous update made 2 months ago planned a fork for block 60500, with current hasrate it would take years to reach.
I'll publish my repo later.
Yes, block 60,500 is a crazy target, way too far off to be practical.
You will have to get places like Cryptsy, Bter, BigVern's pool, to run with it. All references to the source on the net point to the Chinese code and not your fork. Ideally you should try an PM the devs or at least the use CHNcoin on this forum let them know what you are doing.
Not sure if Oct 1st. is enough time for all that.
Hello people.
I made a patch to CNC difficulty adjustment algorithm.
It'll be retargeting every block by a small percentage, just like in PPCoin and Novacoin.
If it's ok, the hard fork is planned for Oct 1. The previous update made 2 months ago planned a fork for block 60500, with current hasrate it would take years to reach.
I'll publish my repo later.
I made a patch to CNC difficulty adjustment algorithm.
It'll be retargeting every block by a small percentage, just like in PPCoin and Novacoin.
If it's ok, the hard fork is planned for Oct 1. The previous update made 2 months ago planned a fork for block 60500, with current hasrate it would take years to reach.
I'll publish my repo later.
Jump to: