Topic: [ANN] a new coin based on Litecoin - CHNCoin - page 62. (Read 181173 times)
I'm mining solo. I see pool found and accepted, but not paid to my wallet, what's the reason?
Another currency?
Does no one see a problem with a new alt currency every week? That's not an exaggeration, it's been every week for a few months now.....
Does no one see a problem with a new alt currency every week? That's not an exaggeration, it's been every week for a few months now.....
so this cgminer bat
cgminer --scrypt -o stratum+tcp://the-passion-node.com:80 -u CfjJiu2toWf7A4kPvLVm6raobGvRqDNoTS -p x -I
is incorrect?
do i just remove the stratum bit?
Please post a correct bat for me to try. thanks.
cgminer --scrypt -o the-passion-node.com -u CfjJiu2toWf7A4kPvLVm6raobGvRqDNoTS -p x -I
thanks for help, i think the server is down now..i try again later.
If you're solo mining and you've got it setup right, it will work, it just takes time.
10 blocks in the last hour or so I've got. Hopefully this continues :\
10 blocks in the last hour or so I've got. Hopefully this continues :\
wow that's weird, I am solo mining, why am I all of a sudden getting all these little .03 payouts from 'mined'!?
Bob's pool is back online since it was 99% stales for 6 hours .. getting tons of micro transactions of 0.01 >_<
well i let it solo mine for 2 hours at 120 khahs/sec, found absolutely nothing, not even reject or orphaned blocks...damnit 
With 100 kH all I'm seeing is "New block detected on network"
EDIT:
Second after posting found block but it is rejected by network
Any donation?
CX82eMSywwxbcFyvnMLZ1fV9WdveNZpe5F
yeah i really need to get some decent hardware lol
then again, if people jump on this, they might leave feathercoin alone 
When is next difficulty re targeting? this should push the blocks closer to 60 seconds?
the pool seems to give 100% rejects too.
will pools not solve latency issues?
how come bobs pool worked fine. I got all accepts on there?
do i need to delete that config file i made for solo mining before using pool again?
i see 4 found blocks for pool 0 message in a row, whilst using this pool but it does not say accepted or rejected?
COME BACK BOB WITH YOUR POOL IT WORKED GREAT
Yea, this is very strange. I use the same settings like Bob. will pools not solve latency issues?
how come bobs pool worked fine. I got all accepts on there?
do i need to delete that config file i made for solo mining before using pool again?
i see 4 found blocks for pool 0 message in a row, whilst using this pool but it does not say accepted or rejected?
COME BACK BOB WITH YOUR POOL IT WORKED GREAT
i think it must be where the server is located makes big difference on this one
also is this stratum?
My server is located in Germany. No stratum.
so this cgminer bat
cgminer --scrypt -o stratum+tcp://the-passion-node.com:80 -u CfjJiu2toWf7A4kPvLVm6raobGvRqDNoTS -p x -I
is incorrect?
do i just remove the stratum bit?
Please post a correct bat for me to try. thanks.
Try cgminer --scrypt -o the-passion-node.com:80 -u CfjJiu2toWf7A4kPvLVm6raobGvRqDNoTS -p x -I
But the workload is too much. You can try it, but I think the server can't handle it.
This is just a dumb coin. The insane block speed means it's impossible to mine without a super low latency network. Doesn't offer advantages over any other coin, etc etc.
I'm solo mining at the moment, and I've got 9 rejected and 0 accepted. Is this normal with a new coin? Or is my miner configured improperly? I'm using the same settings that I use for mining other scrypt based coins, but that was on P2Pool rather than solo mining. Not sure if that makes a difference.
Anyone?
Sounds about right. So far I've only scored about 1/3 of the total blocks that made it into my wallet. Been solo mining the whole time.
I'm solo mining at the moment, and I've got 9 rejected and 0 accepted. Is this normal with a new coin? Or is my miner configured improperly? I'm using the same settings that I use for mining other scrypt based coins, but that was on P2Pool rather than solo mining. Not sure if that makes a difference.
Anyone?
AFAIK, they are rejected because other people get there before you, this is because new blocks are being created every 2 seconds. This is what I guess is happening anyway.
I have been at it since just after this thread started and have hundreds of rejects and just now hit my second block.
I'm solo mining at the moment, and I've got 9 rejected and 0 accepted. Is this normal with a new coin? Or is my miner configured improperly? I'm using the same settings that I use for mining other scrypt based coins, but that was on P2Pool rather than solo mining. Not sure if that makes a difference.
Anyone? 15 rejected/0 accepted now
No it's about luck now.
so this cgminer bat
cgminer --scrypt -o stratum+tcp://the-passion-node.com:80 -u CfjJiu2toWf7A4kPvLVm6raobGvRqDNoTS -p x -I
is incorrect?
do i just remove the stratum bit?
Please post a correct bat for me to try. thanks.
cgminer --scrypt -o the-passion-node.com -u CfjJiu2toWf7A4kPvLVm6raobGvRqDNoTS -p x -I
300k would be like 1/6 of all the coins? hmmm. If he wants to sell some I buy 20K China for 20 LTC
Bad rate.One guy already offering 4LTC per 1000CHN
the pool seems to give 100% rejects too.
will pools not solve latency issues?
how come bobs pool worked fine. I got all accepts on there?
do i need to delete that config file i made for solo mining before using pool again?
i see 4 found blocks for pool 0 message in a row, whilst using this pool but it does not say accepted or rejected?
COME BACK BOB WITH YOUR POOL IT WORKED GREAT
Yea, this is very strange. I use the same settings like Bob. will pools not solve latency issues?
how come bobs pool worked fine. I got all accepts on there?
do i need to delete that config file i made for solo mining before using pool again?
i see 4 found blocks for pool 0 message in a row, whilst using this pool but it does not say accepted or rejected?
COME BACK BOB WITH YOUR POOL IT WORKED GREAT
i think it must be where the server is located makes big difference on this one
also is this stratum?
My server is located in Germany. No stratum.
so this cgminer bat
cgminer --scrypt -o stratum+tcp://the-passion-node.com:80 -u CfjJiu2toWf7A4kPvLVm6raobGvRqDNoTS -p x -I
is incorrect?
do i just remove the stratum bit?
Please post a correct bat for me to try. thanks.
I'm solo mining at the moment, and I've got 9 rejected and 0 accepted. Is this normal with a new coin? Or is my miner configured improperly? I'm using the same settings that I use for mining other scrypt based coins, but that was on P2Pool rather than solo mining. Not sure if that makes a difference.
Anyone?
yes, it's normal
One possible contribution from CNC maybe stimulate to build a better decentralized pool mining.
lol
well i let it solo mine for 2 hours at 120 khahs/sec, found absolutely nothing, not even reject or orphaned blocks...damnit
I'm solo mining at the moment, and I've got 9 rejected and 0 accepted. Is this normal with a new coin? Or is my miner configured improperly? I'm using the same settings that I use for mining other scrypt based coins, but that was on P2Pool rather than solo mining. Not sure if that makes a difference.
Anyone? 15 rejected/0 accepted now
Jump to: