Topic: [ANN] ArabianChain - DubaiCoin (DBIX) - Smart Contracts from Dubai to the World - page 227. (Read 522794 times)
July 06, 2017, 02:08:16 PM
Prepare for a great storm from DBIX
July 06, 2017, 02:06:08 PM
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
I did the same all my rigs on dbix but with ethminer very more fast than claymore
July 06, 2017, 02:01:24 PM
Guys, can explained me please why DBIC raising like hell? Its dead coin, or not? Any news about that? DBIX is only one DubaiCoin and DBIC what? I don't understand... thank you
July 06, 2017, 01:54:11 PM
Please help me. 
I've tried to transfer my wallet*(*.dbixwall file) in another computer and my wallet is not showing up. I get a message "Wallet succesfully imported" but my accounts list is still empty.
And one more thing, when i want to send from pc wallet to livecoin i get this warning: Address checksum mismatch. Use only properly checksumed addresses to prevent wrong sends.
I've tried to transfer my wallet*(*.dbixwall file) in another computer and my wallet is not showing up. I get a message "Wallet succesfully imported" but my accounts list is still empty.
And one more thing, when i want to send from pc wallet to livecoin i get this warning: Address checksum mismatch. Use only properly checksumed addresses to prevent wrong sends.
Today my DBIX wallet (DbixWall-WinGUIv1.0.1_49-2) do NOT show my address. Yesterday was working fine. I also import my backup file (*.dbixwall file) and then get a message "Wallet succesfully imported" but my accounts list is still empty.
Anyone help me!
Create new account first than import and restart the wallet or restart the PC.
July 06, 2017, 01:48:42 PM
Please help me.
I've tried to transfer my wallet*(*.dbixwall file) in another computer and my wallet is not showing up. I get a message "Wallet succesfully imported" but my accounts list is still empty.
And one more thing, when i want to send from pc wallet to livecoin i get this warning: Address checksum mismatch. Use only properly checksumed addresses to prevent wrong sends.
I've tried to transfer my wallet*(*.dbixwall file) in another computer and my wallet is not showing up. I get a message "Wallet succesfully imported" but my accounts list is still empty.
And one more thing, when i want to send from pc wallet to livecoin i get this warning: Address checksum mismatch. Use only properly checksumed addresses to prevent wrong sends.
Today my DBIX wallet (DbixWall-WinGUIv1.0.1_49-2) do NOT show my address. Yesterday was working fine. I also import my backup file (*.dbixwall file) and then get a message "Wallet succesfully imported" but my accounts list is still empty.
Anyone help me!
July 06, 2017, 01:46:03 PM
looks like nice token for long term investment , I'm in
July 06, 2017, 01:18:44 PM
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
did you use -allcoins and -allpools flag on claymore? Try adding `-allcoins 1 -allpools 1` to your start.bat
I did use -allcoins 1 but did not use -allpools 1. Any reason why it would hang without the allpools? I don't understand.
Edit: This is the command I have in my config file now. I commented out -r 1 since I dont want to reboot everytime the miner thread hangs because its too frequent. Any comment on the below?
##DBIX##
-epool dbix.pool.sexy:7007
-ewal 0x3AC9a4EB918f6d56D6b3F8a673575241E79f69DC
-eworker PjCoinPh1
-epsw x
-esm 0
-mode 1
-erate 1
-wd 1
-allcoins 1
-ejobtimeout 10
#-r 1
-dbg 1
-allpools 1
Follow up question. Whats the main difference between proportional rewards and PPLNS?
How can I decide which is best for me. I'm just a small miner with 130mhs.
From Claymores Readme: "-allpools Specify "-allpools 1" if miner does not want to mine on specified pool (because it cannot mine devfee on that pool), but you agree to use some default pools for devfee mining. "
So the devfee can't be mined on a eth fork so you're allowing claymore to connect to another pool for the devfee.
As far as PPLNS and PROP, from my understanding they are very similar miner takes the risk but PPLNS has more of a buffer from when you start and stop receiving you rewards http://139.162.205.147/topic/4144/guide-pps-rbpps-prop-pplns-whats-the-difference
Thank you. I did read the readme but even before when I added allpools 1. Miner automatically switches to some ethereum pool for dev fee then switches back to dbix pool after. This is a bit confusing.
Anyway, appreciate your help. I'll monitor the miner if it still hangs frequently even with allpools 1.
July 06, 2017, 01:08:30 PM
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
did you use -allcoins and -allpools flag on claymore? Try adding `-allcoins 1 -allpools 1` to your start.bat
I did use -allcoins 1 but did not use -allpools 1. Any reason why it would hang without the allpools? I don't understand.
Edit: This is the command I have in my config file now. I commented out -r 1 since I dont want to reboot everytime the miner thread hangs because its too frequent. Any comment on the below?
##DBIX##
-epool dbix.pool.sexy:7007
-ewal 0x3AC9a4EB918f6d56D6b3F8a673575241E79f69DC
-eworker PjCoinPh1
-epsw x
-esm 0
-mode 1
-erate 1
-wd 1
-allcoins 1
-ejobtimeout 10
#-r 1
-dbg 1
-allpools 1
Follow up question. Whats the main difference between proportional rewards and PPLNS?
How can I decide which is best for me. I'm just a small miner with 130mhs.
From Claymores Readme: "-allpools Specify "-allpools 1" if miner does not want to mine on specified pool (because it cannot mine devfee on that pool), but you agree to use some default pools for devfee mining. "
So the devfee can't be mined on a eth fork so you're allowing claymore to connect to another pool for the devfee.
As far as PPLNS and PROP, from my understanding they are very similar miner takes the risk but PPLNS has more of a buffer from when you start and stop receiving you rewards http://139.162.205.147/topic/4144/guide-pps-rbpps-prop-pplns-whats-the-difference
July 06, 2017, 12:50:39 PM
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
did you use -allcoins and -allpools flag on claymore? Try adding `-allcoins 1 -allpools 1` to your start.bat
I did use -allcoins 1 but did not use -allpools 1. Any reason why it would hang without the allpools? I don't understand.
Edit: This is the command I have in my config file now. I commented out -r 1 since I dont want to reboot everytime the miner thread hangs because its too frequent. Any comment on the below?
##DBIX##
-epool dbix.pool.sexy:7007
-ewal 0x3AC9a4EB918f6d56D6b3F8a673575241E79f69DC
-eworker PjCoinPh1
-epsw x
-esm 0
-mode 1
-erate 1
-wd 1
-allcoins 1
-ejobtimeout 10
#-r 1
-dbg 1
-allpools 1
Follow up question. Whats the main difference between proportional rewards and PPLNS?
How can I decide which is best for me. I'm just a small miner with 130mhs.
July 06, 2017, 12:47:11 PM
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
did you use -allcoins and -allpools flag on claymore? Try adding `-allcoins 1 -allpools 1` to your start.bat
July 06, 2017, 12:41:18 PM
Same problem here, are you from brazil?
Nope. This helped me for the first problem...
You've to copy all data from C:/Users/YourUser/AppData/Romaing/Dubaicoin to new Dbix Wallet Folder.
My wallet is connected to 0 peers about 1 hour, i can´t transfer any coin (receive or send), yesterday was working fine. I will use coinpayments wallet, it´s impossible to mine and trust this horrible wallet. I think at some point several miners will lose money with this shitty wallet.
July 06, 2017, 12:32:07 PM
So I have fully committed and switched to dbix mining from ethereum.
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
I am using claymore v9.6. When I swiched I get "miner thread hang" error.
I've been mining ethereum for days without a problem. Suddenly I'm getting this error in claymore when mining dbix. And it's a frequent error.
Anybody experienced the same? How did you fix it?
July 06, 2017, 12:28:55 PM
Same problem here, are you from brazil?
Nope. This helped me for the first problem...
You've to copy all data from C:/Users/YourUser/AppData/Romaing/Dubaicoin to new Dbix Wallet Folder.
July 06, 2017, 12:27:58 PM
Dev or somebody from team, submit DBIX to Bittrex for Listing Consideration. 
https://support.bittrex.com/hc/en-us/requests/new?request_from_search=true&ticket_form_id=114093958872
https://support.bittrex.com/hc/en-us/requests/new?request_from_search=true&ticket_form_id=114093958872
July 06, 2017, 12:27:39 PM
Livecoin offline?
July 06, 2017, 12:17:25 PM
looks like it goes to last years prediction - till 100usd 
I am planning to buy more, but not sure if this is the right time because some are expecting a crash. What would you recommend?
No crash would come now, if anyone wants to buy then this is the last chance, price will go straight to $1000-$10000 soon
But why would it go so high? I mean, long-term okay but in such a short time? I really don't understand this coin haha. I get the goal of it, but there is no news, no nothing but it keeps going up and up in a crazy pace.
The biggest reason I want to get into it is because it's the first arabic cryptocurrency and I am very involved in the arab world and know what they are capable of.
July 06, 2017, 12:15:35 PM
Please help me.
I've tried to transfer my wallet*(*.dbixwall file) in another computer and my wallet is not showing up. I get a message "Wallet succesfully imported" but my accounts list is still empty.
And one more thing, when i want to send from pc wallet to livecoin i get this warning: Address checksum mismatch. Use only properly checksumed addresses to prevent wrong sends.
I've tried to transfer my wallet*(*.dbixwall file) in another computer and my wallet is not showing up. I get a message "Wallet succesfully imported" but my accounts list is still empty.
And one more thing, when i want to send from pc wallet to livecoin i get this warning: Address checksum mismatch. Use only properly checksumed addresses to prevent wrong sends.
Same problem here, are you from brazil?
July 06, 2017, 12:08:42 PM
looks like it goes to last years prediction - till 100usd
I am planning to buy more, but not sure if this is the right time because some are expecting a crash. What would you recommend?
No crash would come now, if anyone wants to buy then this is the last chance, price will go straight to $1000-$10000 soon
July 06, 2017, 12:06:52 PM
Please help me.
I've tried to transfer my wallet*(*.dbixwall file) in another computer and my wallet is not showing up. I get a message "Wallet succesfully imported" but my accounts list is still empty.
And one more thing, when i want to send from pc wallet to livecoin i get this warning: Address checksum mismatch. Use only properly checksumed addresses to prevent wrong sends.
I've tried to transfer my wallet*(*.dbixwall file) in another computer and my wallet is not showing up. I get a message "Wallet succesfully imported" but my accounts list is still empty.
And one more thing, when i want to send from pc wallet to livecoin i get this warning: Address checksum mismatch. Use only properly checksumed addresses to prevent wrong sends.
July 06, 2017, 11:59:06 AM
Free is actually lower then 0.15% Fee....
No Fee PROP DBIX Pool
http://dbix.litwiller.us
I'm only taking TX fee's
Stratum:
dbix.litwiller.us:8008
Jump to: