Here are the settings I use for around 35k WU each r9 280x with the cgminers for UTC
del scrypt*.bin
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra2.nitro.org:4337 -u 'username' -p 'password' --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 11 -g 2 -w 256 --thread-concurrency 16384 --gpu-engine 1080 --gpu-memclock 1500 --temp-target 70 --auto-fan --no-submit-stale --expiry 10 --scan-time 1 --queue 0 --gpu-powertune 20
You can lower the gpu engine and gpu memclock depending on your requirements.
I personally think that UTC should be around 10-13 cents per utc to be competitive with the other alt coins listed since the reward is less than 1/3 of what it used to be. This should be around .00022-.00029. Which would bring the total market value of the coin up to about 1.5 million which is wholly reasonable for the current market. The rewards listed on mining pools also seems to be incorrect since the rewards have been reduced.
Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 160. (Read 946654 times)
May 10, 2014, 04:06:21 PM
May 10, 2014, 03:44:22 PM
@BUMFACE and @dcgirl ;
IMPORTANT about the new wallet !
I downloaded today the V1030 and it is fully synct.
Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain
Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.
But now the second problem ;
At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain
What can here to be the problem
IMPORTANT about the new wallet !
I downloaded today the V1030 and it is fully synct.
Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain
Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.
But now the second problem ;
At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain
What can here to be the problem
My three deposit's at my Cryptsy account are still Pending and still with zero confirmations
Now for already more then 13 hours long
Is it because off the failing block chain
Is it because off faults at Cryptsy
Is it because faults at the new wallet
Paul,
I don't know if you read my edit update but before I stepped out temporarily, I deposited 5 UTC to cryptsy. I'm still waiting on the first confirmation.
So, now that I'm back, I tried to send 5 UTC to deposit in Mintpal as well.
Mintpal accepted them!!! I'm no genius when it comes to blockchain explorer, but shouldn't that help a little with who's currently at fault?
Again, though, I'm a noob... What is cryptsy afraid of that mintpal isn't?
Thanks Craig,
it is a smart test you did.
It will be a good advice more ppl do this test, and after it seems to be the problem at the side of Cryptsy we all inform the support team of them about it and push them for a quick repair.
And off course the DEV team also has to take some action and has to follow and monitoring the response of Cryptsy (Bumface already tweeted them).
For me the most important is to know it is not a problem of the new wallet and that the wallet is 100% safe.
I have some serious amount of coins so it must be save as in the bank... not only for me but for us all !
Edit: And it is a bad thing if professional and big exchanges do not update wallets at the moment they are available.... We all put out there a lot of serious crypto money, we trust them and they must take that very serious
Agreed. And thank you, Paul, for believing in this coin. I'm holding strong and minting.
UTC's "future is so bright, I got to wear shades!!
http://www.youtube.com/watch?v=wEp3zu2e9pE
May 10, 2014, 03:42:16 PM
We suspect the issue is with cryptsy deposits,of multiple coins
May 10, 2014, 03:28:59 PM
@BUMFACE and @dcgirl ;
IMPORTANT about the new wallet !
I downloaded today the V1030 and it is fully synct.
Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain
Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.
But now the second problem ;
At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain
What can here to be the problem
IMPORTANT about the new wallet !
I downloaded today the V1030 and it is fully synct.
Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain
Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.
But now the second problem ;
At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain
What can here to be the problem
My three deposit's at my Cryptsy account are still Pending and still with zero confirmations
Now for already more then 13 hours long
Is it because off the failing block chain
Is it because off faults at Cryptsy
Is it because faults at the new wallet
Paul,
I don't know if you read my edit update but before I stepped out temporarily, I deposited 5 UTC to cryptsy. I'm still waiting on the first confirmation.
So, now that I'm back, I tried to send 5 UTC to deposit in Mintpal as well.
Mintpal accepted them!!! I'm no genius when it comes to blockchain explorer, but shouldn't that help a little with who's currently at fault?
Again, though, I'm a noob... What is cryptsy afraid of that mintpal isn't?
Thanks Craig,
it is a smart test you did.
It will be a good advice more ppl do this test, and after it seems to be the problem at the side of Cryptsy we all inform the support team of them about it and push them for a quick repair.
And off course the DEV team also has to take some action and has to follow and monitoring the response of Cryptsy (Bumface already tweeted them).
For me the most important is to know it is not a problem of the new wallet and that the wallet is 100% safe.
I have some serious amount of coins so it must be save as in the bank... not only for me but for us all !
Edit: And it is a bad thing if professional and big exchanges do not update wallets at the moment they are available.... We all put out there a lot of serious crypto money (and they get big profit out of it), we trust them and they must take that very serious....
May 10, 2014, 03:27:58 PM
Hello everyone, your webmaster over at Ultracointalk.org/ here, reminding you to check out Ultracointalk.org/ and consider making an account. Ultracointalk is the only dedicated Ultracoin forum on the internet, it is a place that Ultracoin can finally call home!
http://ultracointalk.org/
http://ultracointalk.org/
May 10, 2014, 03:26:41 PM
We have listened to the community and this time we offer a .zip file instead of a .rar
http://xwebhosting.org/utc/ultracoin.1.0.3.0-release.zip
or
https://www.dropbox.com/s/7xm1ny6vc9d0ahb/ultracoin.1.0.3.0-release.zip
https://www.dropbox.com/s/939v64ww53bj7on/UltraCoin-Qt-1.0.3.0-Mac.zip
http://www.filedropper.com/ultracoin1030-release
http://www60.zippyshare.com/v/96842336/file.html
http://www.fileswap.com/dl/1VQSY5GOo/
1: make a backup of your wallet.dat file, this file can be found in the appdata folder (windows users type %appdata% in the search box at the start button).
2: delete everything in the appdata/ultracoin folder BUT NOT THE WALLET.DAT
3: download this file XXX and drag the .exe into your wallet folder (not into the appdata/ultracoin folder)
4:click the ultracoin-qt.exe file and it will re download the entire blockchain.
Finished.
Decreased load times by 90%.
Rolled over to ybcoin fork.
Added new databse on intial start of new client.
Added Polish Language pack.
Added POS Start and POW block end heights.
Updated Checkpoints and stake modifiers
New splash.
Logo on wallet added.
Add stake mining checkbox.
RPC call listlatesttx to list latest tx.
Print more stake info while stake reward exceeded.
added support for pool mining in wallet
https://github.com/dx11/ultracoin-2
May 10, 2014, 03:26:14 PM
guys .. don't worry, cryptsy update wallet and your utc come. 
I agree. They do it all the time.
I'm happy that (so far as I can tell) no one has temporarily lost coin in the process.
I'm sure BigVern will give an updated post about it.
May 10, 2014, 03:23:03 PM
guys .. don't worry, cryptsy update wallet and your utc come.
May 10, 2014, 03:18:20 PM
@BUMFACE and @dcgirl ;
IMPORTANT about the new wallet !
I downloaded today the V1030 and it is fully synct.
Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain
Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.
But now the second problem ;
At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain
What can here to be the problem
IMPORTANT about the new wallet !
I downloaded today the V1030 and it is fully synct.
Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain
Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.
But now the second problem ;
At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain
What can here to be the problem
My three deposit's at my Cryptsy account are still Pending and still with zero confirmations
Now for already more then 13 hours long
Is it because off the failing block chain
Is it because off faults at Cryptsy
Is it because faults at the new wallet
Paul,
I don't know if you read my edit update but before I stepped out temporarily, I deposited 5 UTC to cryptsy. I'm still waiting on the first confirmation.
So, now that I'm back, I tried to send 5 UTC to deposit in Mintpal as well.
Mintpal accepted them!!! I'm no genius when it comes to blockchain explorer, but shouldn't that help a little with who's currently at fault?
Again, though, I'm a noob... Why is cryptsy faulting on confirmations while mintpal is fine?
May 10, 2014, 03:10:32 PM
@BUMFACE and @dcgirl ;
IMPORTANT about the new wallet !
I downloaded today the V1030 and it is fully synct.
Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain
Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.
But now the second problem ;
At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain
What can here to be the problem
IMPORTANT about the new wallet !
I downloaded today the V1030 and it is fully synct.
Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain
Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.
But now the second problem ;
At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain
What can here to be the problem
My three deposit's at my Cryptsy account are still Pending and still with zero confirmations
Now for already more then 13 hours long
Is it because off the failing block chain
Is it because off faults at Cryptsy
Is it because faults at the new wallet
How many off you have the same problem with sending a UTC deposit to your Cryptsy account
Please do a test and check this .... May 10, 2014, 03:08:18 PM
Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?
I'm able to get my r9 280x cards up to about 21.7 which is pathetic...
Quote
[2014-05-10 21:22:57] GPU0 | (5s):21.45K (avg):21.99Kh/s | A:54 R:0 HW:0 WU:19.6/m
[2014-05-10 21:22:57] GPU1 | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU2 | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU3 | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m
[2014-05-10 21:22:57] GPU1 | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU2 | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU3 | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m
Quote
./cgminer --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxx.pc4 -p 123 -I 10 -w 312 -g 2 --lookup-gap 2 --gpu-fan 30-75 --temp-cutoff 90 --temp-target 72 --temp-overheat 85 --thread-concurrency 8191 --no-submit-stale --gpu-engine 1200 --gpu-memclock 1500
any ideas would be appreciated - I thought I could do ok with the this coin but I'm better off mining straight scrypt
I wish I could help you out with your situation. I had problems with cgminer. I went to YaCoin miner. I have 2 R9 290x cards on 32 gig ram Xidax computer with Windows 7.
I had problems mining the coin until I downloaded latest YaCoinminer from thirtybird. Search thirtybird in the bitcoin forum search window (inside this thread) and you will find his latest download version. I'm currently using Yacminer 3.5.0 - My settings are:
yacminer --scrypt-chacha --worksize 128 -g 1 --lookup-gap 4 --buffer-size 3532 -R 10496 --auto-gpu --auto-fan -o stratum+tcp://stratum.ultracoinpool.info:3333 -u craigclaussen.Ultminer -p Mineroneniner --nfmin 4 --nfmax 30 --starttime 1388361600
pause
I raised my lookup-gap on purpose. It just makes my system perform better and with less heat while I mine and multi task on the internet. I'm getting around 57 k/hs per card. It's kind of funny, as both cards seem to maximize K/hs better if I have more applications on my computer running at the same time - weird??
Either way, I have no HW and my reject average is just less than 1%.
Hope this helps! And sorry if it doesn't. So many different configurations to create settings for.
May 10, 2014, 03:03:06 PM
Easy, what os and how much ram?
May 10, 2014, 02:53:47 PM
Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?
I'm able to get my r9 280x cards up to about 21.7 which is pathetic...
Quote
[2014-05-10 21:22:57] GPU0 | (5s):21.45K (avg):21.99Kh/s | A:54 R:0 HW:0 WU:19.6/m
[2014-05-10 21:22:57] GPU1 | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU2 | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU3 | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m
[2014-05-10 21:22:57] GPU1 | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU2 | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU3 | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m
Quote
./cgminer --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxx.pc4 -p 123 -I 10 -w 312 -g 2 --lookup-gap 2 --gpu-fan 30-75 --temp-cutoff 90 --temp-target 72 --temp-overheat 85 --thread-concurrency 8191 --no-submit-stale --gpu-engine 1200 --gpu-memclock 1500
any ideas would be appreciated - I thought I could do ok with the this coin but I'm better off mining straight scrypt
...and buying UTC since is so cheap right now
I guess those who can't give answers just give wisecracks...
May 10, 2014, 02:41:18 PM
Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?
I'm able to get my r9 280x cards up to about 21.7 which is pathetic...
Quote
[2014-05-10 21:22:57] GPU0 | (5s):21.45K (avg):21.99Kh/s | A:54 R:0 HW:0 WU:19.6/m
[2014-05-10 21:22:57] GPU1 | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU2 | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU3 | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m
[2014-05-10 21:22:57] GPU1 | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU2 | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU3 | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m
Quote
./cgminer --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxx.pc4 -p 123 -I 10 -w 312 -g 2 --lookup-gap 2 --gpu-fan 30-75 --temp-cutoff 90 --temp-target 72 --temp-overheat 85 --thread-concurrency 8191 --no-submit-stale --gpu-engine 1200 --gpu-memclock 1500
any ideas would be appreciated - I thought I could do ok with the this coin but I'm better off mining straight scrypt
...and buying UTC since is so cheap right now
May 10, 2014, 02:24:37 PM
Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?
I'm able to get my r9 280x cards up to about 21.7 which is pathetic...
Quote
[2014-05-10 21:22:57] GPU0 | (5s):21.45K (avg):21.99Kh/s | A:54 R:0 HW:0 WU:19.6/m
[2014-05-10 21:22:57] GPU1 | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU2 | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU3 | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m
[2014-05-10 21:22:57] GPU1 | (5s):21.46K (avg):22.00Kh/s | A:35 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU2 | (5s):21.45K (avg):22.00Kh/s | A:49 R:0 HW:0 WU:18.1/m
[2014-05-10 21:22:57] GPU3 | (5s):21.45K (avg):21.99Kh/s | A:112 R:0 HW:0 WU:43.2/m
Quote
./cgminer --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o stratum+tcp://stratum.ultracoinpool.info:3333 -u xxx.pc4 -p 123 -I 10 -w 312 -g 2 --lookup-gap 2 --gpu-fan 30-75 --temp-cutoff 90 --temp-target 72 --temp-overheat 85 --thread-concurrency 8191 --no-submit-stale --gpu-engine 1200 --gpu-memclock 1500
any ideas would be appreciated - I thought I could do ok with the this coin but I'm better off mining straight scrypt
May 10, 2014, 01:52:42 PM
Hmmm for some reason I'm not able to get over 17Kh/s with my cards. Can someone give me some reference configs I can put into a .bat file and try for the 280x (sapphires). I tried a bunch of combinations with the guide, could it have anything todo with my x32 OS or my 2GB of system RAM?
May 10, 2014, 01:08:13 PM
same problem here, i sent 250 coins to cryptsy 2 hrs ago
300+ confirmations in my wallet and zero at cryptsy
300+ confirmations in my wallet and zero at cryptsy
OK so more people have the problem.
Did you also contacted Cryptsy for explanation ?
And did you check also your transaction ID in the block chain if the transaction is visible ?
I've reported to cryptsy, will let you know when I get a reply. The blockchain site is down so i can't check, the wallet has over 300 confirmations
And +1, sorry to say but also my deposit today at crypsy is pending and pending and pending and stays at 0 confirmations.
Micheal and DCgirl please hurry with finding answers and get in contact with crypsy
May 10, 2014, 12:58:02 PM
UTC block chain explorer stopped updating after block 274056 2014-05-10 00:35:17.
I think it is the blockchain explorer problem. I've just checked my wallet and the last transaction on the explorer was yesterday but I had three more since that one and they don't appear on explorer site.
Yes we all agree there is a problem at the block chain....
How can this happen that we can not see our transactions at the chain ?
Let it soon be repaired (as I understand Micheal/Bumface is on top of it)
May 10, 2014, 12:36:01 PM
I think it is the blockchain explorer problem. I've just checked my wallet and the last transaction on the explorer was yesterday but I had three more since that one and they don't appear on explorer site.
May 10, 2014, 12:30:12 PM
We are investigating this issue as we speak,however we are confident the new client is not the issue....
I have tweeted cryptsy and i have contacted the builder of the blockchain explorer, a second explorer is being built aswell
update: the blockchain explorer builder will update the site asap.
I have tweeted cryptsy and i have contacted the builder of the blockchain explorer, a second explorer is being built aswell
update: the blockchain explorer builder will update the site asap.
Thanks for your answer ....
did you look in to the DEV wallet, did you recieve 1 UTC i send to you as a test ?
i recieved 1 utc at 17:07 dutch time
Status: 239 confirmations
Date: 10-5-2014 17:07
From: unknown
To: UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf (own address, label: DONATIONS)
Credit: 1.00 UTC
Net amount: +1.00 UTC
Transaction ID: f25282807f6f1aa962f29b84568a57fb13eef1c6075bf3eda4129f3cb5dc933d
did you send it to an unobtainium adress by accident?
OK thanks Bumface, it was a test sending from my wallet.
So you recieved it ad the DEV donation wallet.
Status: 113 confirmations
Date: 10-5-2014 17:06
To: DEV Team UTC Account UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf
Debit: -1.00 UTC
Transaction fee: -0.00001 UTC
Net amount: -1.00001 UTC
Transaction ID: f25282807f6f1aa962f29b84568a57fb13eef1c6075bf3eda4129f3cb5dc933d
Does this say now the problem has to be at the site of Cryptsy
Jump to: