Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 161. (Read 946654 times)

full member
Activity: 182
Merit: 100
Thanks for letting me know this problem.

I am checking if it's server problem or the recent update stopped old wallet downloading new blocks.

It's midnight for me so I will keep looking into this during weekend.  Wink
hero member
Activity: 732
Merit: 500
@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

 

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret Smiley

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.


But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem Huh

Bumface, as a test, I just sent 1 UTC to the DEV Account. Just as test if you receive.



I know Bumface said that non-updated wallets could still send and receive transactions, but has Cryptsy updated their wallet?  Were all the exchanges contacted to make sure they had the new wallet as well?  Just trying to rule out in possible conflicts.  

@ Paul,
That's weird. I had about 6k coin in cryptsy that I bought on friday morning. I downloaded the new wallet friday night, and had no issues withdrawing that coin to my new wallet this Saturday morning.
I'm just letting ya'll know, so far I haven't had any issues related to new wallet and cryptsy. But that's only been one transaction since the new wallet download. I currently have 446 confirmations on the transaction this morning.
Sorry to hear the new... keep us updated.



@3r197

Withdraw from Cryptsy to my new wallet V1030 went also fine with me.
So I received the coins in the new wallet.
But the transaction ID's are not visible in the block chain.
Please check your transaction ID's if the are also not visible ok Huh

The bigger problem is the deposit from coins out of my new wallet to my Cryptsy account.
In my new wallet I can see more then +800 confirmations of each transaction.
Also are the deposit transactions visible at my Cryptsy account but they are for hours and hours Pending at Cryptsy still with zero confirmations each.
And also here, the transactions ID's are not visible at the blochchain at all ...

Okay. Forgive the delayed response. I'm in the process of trying to sell my house and have a lot of people wanting to see it.
Also forgive me, I'm still a noob with only 4 months into cryptocurrencies. I don't know how to look up transaction id's on block chain explorer.
Here is my transaction ID for my cryptsy withdrawal this saturday morning 5-10-14 USA central time zone at 6:44am : 79d9a6840fc5c02d501f2b1bcebfebfaf74c5878c6afe948eebc199cf66f4a2d
Is it showing up in the blockchain?
I've got to leave for a little while -more people want to see the house. I'll be back in an hour or so.

3r197
Craig

Edit: Just sent 5 coins to cryptsy. Shows that the transaction is pending but so far no confimations. Be back in a few
hero member
Activity: 728
Merit: 501
We are investigating this issue as we speak,however we are confident the new client is not the issue....

I have tweeted cryptsy and i have contacted the builder of the blockchain explorer, a second explorer is being built aswell

update: the blockchain explorer builder will update the site asap.

Thanks for your answer ....

did you look in to the DEV wallet, did you recieve 1 UTC i send to you as a test ?

i recieved 1 utc at 17:07 dutch time

Status: 239 confirmations
Date: 10-5-2014 17:07
From: unknown
To: UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf (own address, label: DONATIONS)
Credit: 1.00 UTC
Net amount: +1.00 UTC
Transaction ID: f25282807f6f1aa962f29b84568a57fb13eef1c6075bf3eda4129f3cb5dc933d


did you send it to an unobtainium adress by accident?
sr. member
Activity: 320
Merit: 250
We are investigating this issue as we speak,however we are confident the new client is not the issue....

I have tweeted cryptsy and i have contacted the builder of the blockchain explorer, a second explorer is being built aswell

update: the blockchain explorer builder will update the site asap.

Thanks for your answer ....

did you look in to the DEV wallet, did you recieve 1 UTC i send to you as a test ?
full member
Activity: 233
Merit: 100
thanks for the quick response and update bf
hero member
Activity: 728
Merit: 501
We are investigating this issue as we speak,however we are confident the new client is not the issue....

I have tweeted cryptsy and i have contacted the builder of the blockchain explorer, a second explorer is being built aswell

update: the blockchain explorer builder will update the site asap.
full member
Activity: 138
Merit: 100
   


                  www.ultracoinpool.info  THE POOL IS BACK UP!
full member
Activity: 138
Merit: 100
@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

 

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret Smiley

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.


But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem Huh


@Bumface and @dcgirl...

Please look in to it as soon as possible.

So we see more ppl have the same problem.

Lets rule out for shure it is not a wallet problem




HEY MATE IS NOT THE WALLET PROBLEM I THINK BUMFACE TO FORGET EXPLAIN ABOUT
              
THE DEV. MOVE SOURCE CODE AND THEY THINK THAT IS THE SAME
                              
WE HAVE THE SAME ISSUE LAST NIGHT IN THE POOL, I 100% NOT WALLET ISSUE IS

 www.cryptsy.com PROBLEM
                      
sr. member
Activity: 320
Merit: 250
@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

 

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret Smiley

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.


But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem Huh


@Bumface and @dcgirl...

Please look in to it as soon as possible.

So we see more ppl have the same problem.

Lets rule out for shure it is not a wallet problem
full member
Activity: 233
Merit: 100
same problem here, i sent 250 coins to cryptsy 2 hrs ago

300+ confirmations in my wallet and zero at cryptsy

OK so more people have the problem.

Did you also contacted Cryptsy for explanation ?

And did you check also your transaction ID in the block chain if the transaction is visible ?

I've reported to cryptsy, will let you know when I get a reply. The blockchain site is down so i can't check, the wallet has over 300 confirmations
full member
Activity: 228
Merit: 100
What are you guys averaging as far as UTC per day? With my current setup I'm mining about 20 a day with 3 x Sapphire r9 280x's. Each card is running at 17Kh/s with 0 hardware errors. Somethings telling me that doesn't sound right?

my r9 280x runs at 55 khash/s each so that is quite low. There is room for some more tweaking, I used the configurator written by thirtybird and It worked very well.

Uggie I hate to be a pain but could you direct me to thirtybirds configurator? I would really appreciate it.

No Pain at all ! let me know if it works out for you

http://www.ultracoin.net/configgen_raw.html
sr. member
Activity: 476
Merit: 250
What are you guys averaging as far as UTC per day? With my current setup I'm mining about 20 a day with 3 x Sapphire r9 280x's. Each card is running at 17Kh/s with 0 hardware errors. Somethings telling me that doesn't sound right?

my r9 280x runs at 55 khash/s each so that is quite low. There is room for some more tweaking, I used the configurator written by thirtybird and It worked very well.

Uggie I hate to be a pain but could you direct me to thirtybirds configurator? I would really appreciate it.
sr. member
Activity: 320
Merit: 250
same problem here, i sent 250 coins to cryptsy 2 hrs ago

300+ confirmations in my wallet and zero at cryptsy

OK so more people have the problem.

Did you also contacted Cryptsy for explanation ?

And did you check also your transaction ID in the block chain if the transaction is visible ?
full member
Activity: 233
Merit: 100
same problem here, i sent 250 coins to cryptsy 2 hrs ago

300+ confirmations in my wallet and zero at cryptsy
sr. member
Activity: 320
Merit: 250
@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

 

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret Smiley

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.


But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem Huh

Bumface, as a test, I just sent 1 UTC to the DEV Account. Just as test if you receive.



I know Bumface said that non-updated wallets could still send and receive transactions, but has Cryptsy updated their wallet?  Were all the exchanges contacted to make sure they had the new wallet as well?  Just trying to rule out in possible conflicts.  

@ Paul,
That's weird. I had about 6k coin in cryptsy that I bought on friday morning. I downloaded the new wallet friday night, and had no issues withdrawing that coin to my new wallet this Saturday morning.
I'm just letting ya'll know, so far I haven't had any issues related to new wallet and cryptsy. But that's only been one transaction since the new wallet download. I currently have 446 confirmations on the transaction this morning.
Sorry to hear the new... keep us updated.



@3r197

Withdraw from Cryptsy to my new wallet V1030 went also fine with me.
So I received the coins in the new wallet.
But the transaction ID's are not visible in the block chain.
Please check your transaction ID's if the are also not visible ok Huh

The bigger problem is the deposit from coins out of my new wallet to my Cryptsy account.
In my new wallet I can see more then +800 confirmations of each transaction.
Also are the deposit transactions visible at my Cryptsy account but they are for hours and hours Pending at Cryptsy still with zero confirmations each.
And also here, the transactions ID's are not visible at the blochchain at all ...
sr. member
Activity: 251
Merit: 250
Hope the Multipool is going back up soon aswell, since we got our coins I have no trust issues with it.  Smiley
Me too Smiley At the moment it is still: "website temporarily unavailable" :/
full member
Activity: 228
Merit: 100
What are you guys averaging as far as UTC per day? With my current setup I'm mining about 20 a day with 3 x Sapphire r9 280x's. Each card is running at 17Kh/s with 0 hardware errors. Somethings telling me that doesn't sound right?

my r9 280x runs at 55 khash/s each so that is quite low. There is room for some more tweaking, I used the configurator written by thirtybird and It worked very well.
hero member
Activity: 732
Merit: 500
@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

 

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret Smiley

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.


But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem Huh

Bumface, as a test, I just sent 1 UTC to the DEV Account. Just as test if you receive.



I know Bumface said that non-updated wallets could still send and receive transactions, but has Cryptsy updated their wallet?  Were all the exchanges contacted to make sure they had the new wallet as well?  Just trying to rule out in possible conflicts. 

@ Paul,
That's weird. I had about 6k coin in cryptsy that I bought on friday morning. I downloaded the new wallet friday night, and had no issues withdrawing that coin to my new wallet this Saturday morning.
I'm just letting ya'll know, so far I haven't had any issues related to new wallet and cryptsy. But that's only been one transaction since the new wallet download. I currently have 446 confirmations on the transaction this morning.
Sorry to hear the new... keep us updated.
full member
Activity: 224
Merit: 100
@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh


Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

 

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret Smiley

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.


But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem Huh

Bumface, as a test, I just sent 1 UTC to the DEV Account. Just as test if you receive.



I know Bumface said that non-updated wallets could still send and receive transactions, but has Cryptsy updated their wallet?  Were all the exchanges contacted to make sure they had the new wallet as well?  Just trying to rule out in possible conflicts. 
sr. member
Activity: 476
Merit: 250
What are you guys averaging as far as UTC per day? With my current setup I'm mining about 20 a day with 3 x Sapphire r9 280x's. Each card is running at 17Kh/s with 0 hardware errors. Somethings telling me that doesn't sound right?
Jump to: