[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 162.

PaulR1

sr. member

Activity: 320

Merit: 250

Quote from: PaulR1 on May 10, 2014, 09:53:06 AM

Quote from: bumface on May 10, 2014, 09:43:51 AM

Quote from: PaulR1 on May 10, 2014, 09:41:15 AM

@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh

Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.

But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem Huh

Bumface, as a test, I just sent 1 UTC to the DEV Account. Just as test if you receive.

PaulR1

sr. member

Activity: 320

Merit: 250

Quote from: bumface on May 10, 2014, 09:43:51 AM

Quote from: PaulR1 on May 10, 2014, 09:41:15 AM

@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh

Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

Thank for your quick answer.

I contacted already Cryptsy.
On there request I send them the transactions ID's.

The answer from Crypsty is the following;

Hello Paul,
Looking at the block explorer that transaction ID is not in the chain.
Your wallet may not be in sync and you might possibly have to re-download the block chain.

But is I wrote before, my wallet V1030 is fully synct and the green "V" is visible...

Any more ideas what can be the problem Huh

dcgirl

sr. member

Activity: 448

Merit: 250

Quote from: PaulR1 on May 10, 2014, 09:41:15 AM

@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh

Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

keep us updated on whether your transactions do show up, thanks

Uggle

full member

Activity: 228

Merit: 100

Hope the Multipool is going back up soon aswell, since we got our coins I have no trust issues with it.

sylwt

full member

Activity: 140

Merit: 100

good coin,price will rise....to moon

bumface

hero member

Activity: 728

Merit: 501

Quote from: PaulR1 on May 10, 2014, 09:41:15 AM

@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh

Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

I think this problem is with the block explorer site, the wallet is fully tested and 100% ok. we are working with some community members about making a second blockexplorer.the people working on this are scrypto and bret

the second problem might be at cryptsy`s end, im not sure.I do know that an un-updated wallet can still send and recieve UTC from an updated wallet....

I advise you to contact cryptsy about this issue ,please keep me informed about the situation

PaulR1

sr. member

Activity: 320

Merit: 250

@BUMFACE and @dcgirl ;

IMPORTANT about the new wallet !

I downloaded today the V1030 and it is fully synct.

Next today I sent from my Cryptsy account some transactions to my wallet on my laptop.
This went ok and the wallet received all the incoming transactions.
But looking now at the block explorer those incoming transaction ID's are not in the chain Huh

Next I sent 3 transactions from my wallet to my Cryptsy account.
At checking the transactions in my wallet I can see there are more than +600 confirmations of each transaction.
So looking at this i must think the outgoing transactions from my wallet to Cryptsy has to be ok.

But now the second problem ;

At my Cryptsy account the incoming transactions are after many hours still not received.
I can only see at my Cryptsy account that these incoming transactions are still Pending Deposits fore many hours. Still with zero incoming conformations.
Also here, very strange, looking at the block explorer those outgoing transaction ID's are also not in the chain Huh

What can here to be the problem Huh

Thiago1

full member

Activity: 138

Merit: 100

www.ultracoinpool.info The pool is back up! Sorry about the extended downtime

3r197

hero member

Activity: 732

Merit: 500

ultracoinpool.info

back online Grin

primouno

sr. member

Activity: 251

Merit: 250

Quote from: DaiBoyCookie on May 10, 2014, 05:02:34 AM

Quote from: 3r197 on May 09, 2014, 07:23:59 PM

Quote from: rapture333 on May 09, 2014, 03:53:26 PM

Just downloaded YACminer, how do you guys set it up for Ultracoin? Can I just modify my existing cgminer .bat file to work for YACminer?

Yes, in my humble opinion YACminer has been my most successful way to mine UTC. Give those guys and especially Thirtybird a big thanks for what they have created. Scrypt Chacha should be viewed as a family. Chacha is the future! I'm buying YaCoin as well.

You should be able to tweak out your GPU settings if you follow the mining pool settings all the while using Thirtybirds updated YaCoin miner download. https://github.com/Thirtybird/YACMiner/releases

Cheers!!

Hi Guys
I have tried to mine UTC for over a month, I use Yacminer and have read through this thread for settings but no matter what I do shares do not get accepted.
gpu's are 7850's with 8 gig memory, running windows 7 64bit

Note I can mine every other coin without issues. Undecided

Try cgminer 3.7.3 Kalroth from this site: https://sites.google.com/site/rmdavidson/ Direct download: https://sites.google.com/site/rmdavidson/cgminer-3.7.3-kalroth-sj0.03.zip?attredirects=0

nuocmamt

newbie

Activity: 26

Merit: 0

From what I read, Yacminer shows greater than normal hashrates but orphans a lot of shares. I wouldn't personally use it because it overheats my GPUs like never before.

DaiBoyCookie

newbie

Activity: 16

Merit: 0

Quote from: 3r197 on May 09, 2014, 07:23:59 PM

Quote from: rapture333 on May 09, 2014, 03:53:26 PM

Just downloaded YACminer, how do you guys set it up for Ultracoin? Can I just modify my existing cgminer .bat file to work for YACminer?

Yes, in my humble opinion YACminer has been my most successful way to mine UTC. Give those guys and especially Thirtybird a big thanks for what they have created. Scrypt Chacha should be viewed as a family. Chacha is the future! I'm buying YaCoin as well.

You should be able to tweak out your GPU settings if you follow the mining pool settings all the while using Thirtybirds updated YaCoin miner download. https://github.com/Thirtybird/YACMiner/releases

Cheers!!

Hi Guys
I have tried to mine UTC for over a month, I use Yacminer and have read through this thread for settings but no matter what I do shares do not get accepted.
gpu's are 7850's with 8 gig memory, running windows 7 64bit

Note I can mine every other coin without issues. Undecided

nuocmamt

newbie

Activity: 26

Merit: 0

UTC block chain explorer stopped updating after block 274056 2014-05-10 00:35:17.

MasterCATZ

full member

Activity: 426

Merit: 100

Thanks for DROPBOX Tongue

much better than the other methods
next best option torrent Tongue

as Always great job DCGirl , will get around to playing with the widget soon

Liza Abonales343

newbie

Activity: 21

Merit: 0

Didn't mean to come off as beggar. lol So everyone relax. and Lets watch UTC Grow.

primouno

sr. member

Activity: 251

Merit: 250

I hope ultracoinpool.info will run soon.

There's ultra-arb widget on http://www.whattomine.com/. Looks great Cheesy

Thiago1

full member

Activity: 138

Merit: 100

.      MINERS FROM. WWW.ULTRACOINPOOL.INFO SORRY FOR DELAY

   UPDATE THE NEW WALLET TAKE. LITTLE LONGER because we have the NEW.SOURCE

   I WANT TO SAY ALL YOUR COINS ARE SAFE.

   LATER TODAY WE GO HAVE THE SERVICE BACK

   WE TRY TO PUT. 2 SERVICE . THANK YOU

3r197

hero member

Activity: 732

Merit: 500

Quote from: mrcashking on May 09, 2014, 05:40:19 PM

Quote from: KingCole on May 09, 2014, 04:13:07 PM

Bumface / DcGirl & Dev team,

Now that the major problems with the wallet have been resolved do you a roadmap for future features? For many people the wallet maybe the only interaction the devs and community have with the miner so it might be a good way to differentiate our wallet from all the other alt-coins. Here are some ideas:

Ticker for the UltraCoin price
Ticker banner for news related to UltraCoin
Tab for information from Ultra-Arb site
Two-factor authentication to make the wallet Ultra-Secure

KC

Great ideas!

Interesting thoughts KC.
I might add, I still think the idea of a ticker for total UTC amount currently being "minted" (if such a thing could be calculated in real time) would also be beneficial for potential miners/investors or existing miners/investors who wish to buy in or sell out at the current market price. Whether it's info would be on the official website or the wallet.

Yet regardless, you Dev's deserve a gracious applause and have proven again and again that you are here to keep this coin's future bright and protect it's community.
Hope you all have a blessed and well deserved weekend!!!

Thank you so much. If only "untalented" was here to give the "Gatsby" meme he posted on page 664.
It seems fitting at a time like this!!

Cheers all!!

Toxic2040

legendary

Activity: 1834

Merit: 4197

Quote from: zhonghao110 on May 09, 2014, 08:52:09 PM

Purse could not connect to the Internet, how should solve

Check your firewall, might have to reset permissions.

zhonghao110

full member

Activity: 224

Merit: 100

goog

Purse could not connect to the Internet, how should solve

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 162. (Read 946654 times)