Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 424. (Read 946654 times)

newbie
Activity: 28
Merit: 0
DDOS just started? I can see nitro and leetpools dead in my cgminer.

Leet works for me, cgminer just switched on it
member
Activity: 61
Merit: 10
why is my mintpal entry 888 not listed Sad posted it in the same page the game was announced Smiley
full member
Activity: 143
Merit: 100
DDOS just started? I can see nitro and leetpools dead in my cgminer.
newbie
Activity: 34
Merit: 0
I have an r9 270x and I can't seem to get a higher intensity of 12 without having to many errors. I still get errors with 12 but very small amount. What is a good tc? My ram is also only 3 gb... it's only one card though. Any advice would be appreciated. I'm also only getting 75khash
full member
Activity: 156
Merit: 100
Can someone send me the invitations for http://ultra.nitro.org/ to my email?

[email protected]

Tks
newbie
Activity: 28
Merit: 0
583 kh/s -> 98.923 coins/day
newbie
Activity: 42
Merit: 0
Can anyone share their hashrate and coins per day? I only got 9 coins in 11 hours of mining with 173 hashrate. 3% reject rates. If i use coinwarz calculator with 7.5 diff i should get 1 coin per hour. But the coin difficulty is between 5 to 7. Thanks.
newbie
Activity: 2
Merit: 0
 :'(need  7850  full  conf set,please  help!
member
Activity: 84
Merit: 10
Hello All,
I'm new to jane scrypt and having trouble compiling cgminer with the patches. Any step-by-step tutorials available?

http://ultra.leetpools.com/index.php?page=gettingstarted

There is a link to the pre patched CGMiner
newbie
Activity: 1
Merit: 0
Hello All,
I'm new to jane scrypt and having trouble compiling cgminer with the patches. Any step-by-step tutorials available?
newbie
Activity: 28
Merit: 0
I'm getting 150kH/s on a single 280x... is this normal?

Another question, any luck with mining UTC with cudaminer?

140-150 kh/s u can get but check if u've no Hardware errors
full member
Activity: 199
Merit: 100
I'm getting 150kH/s on a single 280x... is this normal?

Another question, any luck with mining UTC with cudaminer?
newbie
Activity: 28
Merit: 0
Grin me and my mom are very happy that we held ultracoin
From tears to joy lol.
Glad to know you're back in the game Smiley
member
Activity: 80
Merit: 10
500btc volum t-minus 15min!!!
sr. member
Activity: 350
Merit: 250
Grin me and my mom are very happy that we held ultracoin

See we told you, you havent lost as long as you are holding your coins.
member
Activity: 84
Merit: 10
http://ULTRA.leetpools.com

Just wanted to remind everyone about our pool Smiley We also have full DDOS protection Smiley

Come chill in IRC #Leetpools on quakenet
sr. member
Activity: 1221
Merit: 250
Should I sell at 0.0004 then buy back at 0.0003 ? I just scared they're not going down but going up  Grin Grin It's not much to mine with the diff  atm:-\
full member
Activity: 426
Merit: 100
Can anyone share their hashrate and coins per day? I only got 9 coins in 11 hours of mining with 173 hashrate. 3% reject rates. If i use coinwarz calculator with 7.5 diff i should get 1 coin per hour. But the coin difficulty is between 5 to 7. Thanks.

well currently each of my rigs with 6x r9 290's

   Temp    Load      Rate            Accept/Invalid          GPU Family  Fan%  (rpm)    Core      Memory   
   75c   100% 160 Kh/s   11740 / 865   6.86%   290 Series   65% (3738) 940 Mhz 1250 Mhz
Average Card speck,  lowest reject rig is around 4%
Before I upped TC from 32765 to 42000 I was running I 13 ( 150 watts / GPU)
Now back to I 18 and double my kh/s with around 4% increase in rejects
about 200 watts / GPU  out off the  300+ watts when using I 20

each rig is getting 980 Kh/s 150.347 UTC coins / Day

(I was getting 300 coins yesterday with core of 900 mhz !!! I bumped core speed up because of extra miners  )

Pool Hash Rate    29.192 MH/s
Pool Efficiency    98.31%
Current Active Workers    86
Current Difficulty    6.50879778
Est. Next Difficulty    0 (Change in 0 Blocks)
Est. Avg. Time per Round (Network)    zero seconds
Est. Avg. Time per Round (Pool)    15 minutes 59 seconds
Est. Shares this Round    26660 (done: 438.36%)
Next Network Block    94528    (Current: 94527)
Last Block Found    94382
Time Since Last Block    1 hour 16 minutes 35 seconds    

*edit*

really need to get flashing test rig was impressive
https://litecointalk.org/index.php?topic=12830.msg121827#msg121827

flashed with 1.1V bios and can now run I 20 again Tongue
only dropped about 10% power usage

2x cards 370 watts @ 940 core I 20 .. might try bumping the core up to 1ghz thats normally 320 watts per card ...

how ever I am unsure what total power drain is I am only measuring from 6/8 pin power plugs not taking into consideration of PCI-e slot drain .. might rectify that now before I blow another 500 watt PSU


*edit*
PC booting up is 120~150watts
PC mining with 2x R9 290's bios modded 1.1V is 520 watts
also noticing with bios mod my WU is higher then my hash rate !!!

when I first benched Twin R9's I was near 800 watts ( but it was a different Mobo and 1 ghz)

now that I know hardly any pci-e drain I'll bump the core up for a quick spin
oem cooling so for long term use trying to keep everything around 70 deg .. last time I was near 100 deg in seconds and vynal floor started melting,  test bench aka floor

*edit*

manually set fan 85%
1ghz core
twin R9 290 mobo mining under 600 watts
very impressed with modded bios about 50 watts difference from 900 - 1000 core
and drum roll .. temp low 73's room temp 34 - 37 ( HDD temps of file server )

how ever not really any change in khs / WU I gained a whole 1% with over 10% increase in watts

soo maybe back to my 900 mhz sweet spot any how

if it wasn't E RAM I would be OC'ing em


 
newbie
Activity: 17
Merit: 0
volume mintpal quiz: 592
sr. member
Activity: 951
Merit: 252
Heh heh heh heh heh... took me 3 days but I've successfully daytraded 0.00081000 BTC into 0.01354418 BTC  Cool
Jump to: