Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 427. (Read 946654 times)
March 06, 2014, 07:11:45 PM
Anyone want to buy a Battlefield 4 EA Origin PC full game code off me for 50 UTC?
March 06, 2014, 07:01:20 PM
Some more intelligent speculation reg. cryptsy? There is no assurance UTC will be added. It is not listed that top 2 coins would be added - that would make it obv which coins would rise in price value and bigvern tends to steer away from hinting to which new coins will be on nowadays.
Maybe 2 other coins in top 10? UTC would eat shit on mintpal in that case.
Maybe 2 other coins in top 10? UTC would eat shit on mintpal in that case.
Ah, but wait young Grasshoppa....
Crypto-trade is ready to open trade again. UTC can be traded for USD and EU.
That is something Cryptsy can't do.
Current price uptick is from Both possible exchanges, not Cryptsy alone
March 06, 2014, 07:00:53 PM
Some more intelligent speculation reg. cryptsy? There is no assurance UTC will be added. It is not listed that top 2 coins would be added - that would make it obv which coins would rise in price value and bigvern tends to steer away from hinting to which new coins will be on nowadays.
Maybe 2 other coins in top 10? UTC would eat shit on mintpal in that case.
Maybe 2 other coins in top 10? UTC would eat shit on mintpal in that case.
OMG do you read what you write?
March 06, 2014, 06:57:20 PM
Some more intelligent speculation reg. cryptsy? There is no assurance UTC will be added. It is not listed that top 2 coins would be added - that would make it obv which coins would rise in price value and bigvern tends to steer away from hinting to which new coins will be on nowadays.
Maybe 2 other coins in top 10? UTC would eat shit on mintpal in that case.
Maybe 2 other coins in top 10? UTC would eat shit on mintpal in that case.
March 06, 2014, 06:49:28 PM
Hey guys good luck with the voting, all the best on cryptsy!
Hi mate, same too you....
But please can you stop buying votes !
I have only 8 BTC reserved for counter buys if needed, but i prefer to keep them in my own wallet in stead of the wallet of BigVerns
Believe it or not it's not myself or any other dev involved in the buying. I logged on mid-day to see this amazing surprise. Happy to see supporters stepping forward (especially ones with big wallets!) lol
You have an impressive trust rating my friend.
Dare to elaborate on this?
March 06, 2014, 06:46:11 PM
Hey guys good luck with the voting, all the best on cryptsy!
Hi mate, same too you....
But please can you stop buying votes !
I have only 8 BTC reserved for counter buys if needed, but i prefer to keep them in my own wallet in stead of the wallet of BigVerns
Believe it or not it's not myself or any other dev involved in the buying. I logged on mid-day to see this amazing surprise. Happy to see supporters stepping forward (especially ones with big wallets!) lol
March 06, 2014, 06:44:44 PM
Hey guys good luck with the voting, all the best on cryptsy!
Hi mate, same too you....
But please can you stop buying votes !
I have only 8 BTC reserved for counter buys if needed, but i prefer to keep them in my own wallet in stead of the wallet of BigVerns
Believe it or not it's not myself or any other dev involved in the buying. I logged on mid-day to see this amazing surprise. Happy to see supporters stepping forward (especially ones with big wallets!) lol
March 06, 2014, 06:41:16 PM
o darn it... price doubled while mining difficulty tripled, should I laugh or cry ?!
You should definitely shut up and mine.
March 06, 2014, 06:33:51 PM
o darn it... price doubled while mining difficulty tripled, should I laugh or cry ?!
March 06, 2014, 06:32:17 PM
Nah, I am using the patched CGMiner from https://sites.google.com/site/rmdavidson/
When I put any thread concurrency onto the settings, I get around 10% hardware errors... Any ideas? Does it matter if my rig only has 4GB ram?
If you are running 6 cards on one system with 4 Gb of RAM, I'm surprised you can even get them all running without getting an "Error 4: Failed enqueing...." The 4 GB will definitely effect your ability to run that many cards.
[/quote]
Got 4 270s on 4gb of ram and my 2 280x on 4gb.. no problem here..
Next N factor.. maybe..
March 06, 2014, 06:29:41 PM
Just bought 125 ultracoins at 38000, what am I in for?
March 06, 2014, 06:29:33 PM
UTC reward 20UTC!!!
R290 4GB Cards script like this! getting 138 average a card.
I hear a allot of people that gets 160-180? if someone nows the script and correct it UTC reward 20
color 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.leetpools.net:3333 -u x -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 18 -g 1 --thread-concurrency 42000,42000,42000 --lookup-gap 3,3,3 --gpu-threads 1 --gpu-powertune 20,20,20 --expiry 10 --scan-time 1 --queue 0 --auto-fan --gpu-engine 1010,1010,1010 --gpu-memclock 1390,1390,1390 -T
R290 4GB Cards script like this! getting 138 average a card.
I hear a allot of people that gets 160-180? if someone nows the script and correct it UTC reward 20
color 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.leetpools.net:3333 -u x -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 18 -g 1 --thread-concurrency 42000,42000,42000 --lookup-gap 3,3,3 --gpu-threads 1 --gpu-powertune 20,20,20 --expiry 10 --scan-time 1 --queue 0 --auto-fan --gpu-engine 1010,1010,1010 --gpu-memclock 1390,1390,1390 -T
The secret is the Stilt Bios
https://litecointalk.org/index.php?topic=12830.390
I recommend that bios for 290
MBA_C6711101-100_K2_AGR_STILTMP_V34.zip (DPM7 - 1.2250V)
You can flash bios on team viewer
1.Just download atiwinflash to desktop:
http://www.techpowerup.com/downloads/2311/ati-winflash-2-6-7/
2.unzip
3.put the bios into folder atiwinflash
4.Open the Command Prompt window by clicking the Start button Picture of the Start button, clicking All Programs, clicking Accessories, and then clicking Command Prompt.
cd desktop
cd ati_winflash_2.6.7
when you have rig with 4 cards you must prompt:
atiflash -p 0 nameofthebios.bin -f
now wait ~2 minutes when flash is done, you must flash another card :
atiflash -p 1 nameofthebios.bin -f
now wait ~2 minutes when flash is done, you must flash another card :
atiflash -p 2 nameofthebios.bin -f
now wait ~2 minutes when flash is done, you must flash another card :
atiflash -p 3 nameofthebios.bin -f
restart system when flash is done
and wait drivers will install
restart
setup your card on msi afterburner beta 18
GPU 1040MHZ
MEM 1400MHz
Powertune +20%
and mine:)
If you have 4GB ram, you must upgrade to 8GB then your 290/290x will work ~180khs
March 06, 2014, 06:27:54 PM
I take it that those guys with 2 MH/s ++ rigs are the big boys right ?? I thought my setup was good with 6MH/s scrypt on 3 rigs... Turns out that it is already phased out lol
March 06, 2014, 06:26:53 PM
is there a brilliant coder, to make a program that calculates new settings per n factor??
March 06, 2014, 06:23:29 PM
The miner on the front page yields the same results lol
March 06, 2014, 06:18:30 PM
@bumface
Could you put at least these two links on the FAQ of the OP regards to hash rates?
We are getting a lot of new miners now and this question comes up way too often.
http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/
https://bitcointalksearch.org/topic/m.5557461
Could you put at least these two links on the FAQ of the OP regards to hash rates?
We are getting a lot of new miners now and this question comes up way too often.
http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/
https://bitcointalksearch.org/topic/m.5557461
March 06, 2014, 06:18:08 PM
Hi!
Why that for me 2 video cards 7950 give out in general only 500 k/h here. Or is it normal for the booty of UTC?
Help
Why that for me 2 video cards 7950 give out in general only 500 k/h here. Or is it normal for the booty of UTC?
Help
Quote
ultracoinminer -o ultra.leetpools.com:3333 -u ****** -p * --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -d 0 -d 1 -I 18 -g 1 -w 256 --temp-cutoff 90 --temp-overheat 85 --queue 0 --no-submit-stale --scan-time 1 --no-submit-stale
Yep, might be right.
I've about 260k/h per 7950.
I don't understand how you guys are getting these speed... I am getting 70kh/s on my 7950... Not sure if there is something wrong or if it is normal?? I read here:
http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/
That these people aren't getting a high hash rate either ?? I am running the modded cgminer 3.7.2. When I put any thread concurrency, I instantly get HW errors so I have removed it from my line. I have a 6 GPU configuration and only getting 400kh/s! -g 1 etc... Any ideas ? Is there a new miner or something ? Intensity is 12. If I change it to 13, it gives me HW error.
Nah, I am using the patched CGMiner from https://sites.google.com/site/rmdavidson/
When I put any thread concurrency onto the settings, I get around 10% hardware errors... Any ideas? Does it matter if my rig only has 4GB ram?
If you are running 6 cards on one system with 4 Gb of RAM, I'm surprised you can even get them all running without getting an "Error 4: Failed enqueing...." The 4 GB will definitely effect your ability to run that many cards.
Oh I didn't know that... What would be the recommended RAM for a 6 GPU setup ? I read loads of guides and they said just get minimal RAM as that isn't important.... But yes, I did get some error you mentioned when I put -g 2 and also changed the thread concurrency.
March 06, 2014, 06:18:03 PM
March 06, 2014, 06:16:56 PM
if we got cryptsy and crypto-trade is comming back, which exchange site will you use?
It makes sense to spread UTC trading across a number (3 is a good start) of GOOD exchanges. Their reputation and volumes will assist in uptake and arbitrage opportunities. A good solid momentum, paced as bumface has said before, not boom/bust, and theres a very good chance UTC dreams will be realised. A good spread is always a wise choice
MintPal is doing well, it would be good to see Crypto Trade back in full effect and Cryptsy would be the cherry on the cake
March 06, 2014, 06:14:15 PM
Hi!
Why that for me 2 video cards 7950 give out in general only 500 k/h here. Or is it normal for the booty of UTC?
Help
Why that for me 2 video cards 7950 give out in general only 500 k/h here. Or is it normal for the booty of UTC?
Help
Quote
ultracoinminer -o ultra.leetpools.com:3333 -u ****** -p * --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -d 0 -d 1 -I 18 -g 1 -w 256 --temp-cutoff 90 --temp-overheat 85 --queue 0 --no-submit-stale --scan-time 1 --no-submit-stale
Yep, might be right.
I've about 260k/h per 7950.
I don't understand how you guys are getting these speed... I am getting 70kh/s on my 7950... Not sure if there is something wrong or if it is normal?? I read here:
http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/
That these people aren't getting a high hash rate either ?? I am running the modded cgminer 3.7.2. When I put any thread concurrency, I instantly get HW errors so I have removed it from my line. I have a 6 GPU configuration and only getting 400kh/s! -g 1 etc... Any ideas ? Is there a new miner or something ? Intensity is 12. If I change it to 13, it gives me HW error.
Nah, I am using the patched CGMiner from https://sites.google.com/site/rmdavidson/
When I put any thread concurrency onto the settings, I get around 10% hardware errors... Any ideas? Does it matter if my rig only has 4GB ram?
Jump to: