Pages:
Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 48. (Read 946641 times)

sr. member
Activity: 275
Merit: 250
Ahaaa  Wink .....looking at all of you previous posts you're nothing more than just another wining crybaby  Cry who is full of negativity .... Or just another Troll alias

If you don't like it why you keep coming back ? Go away and keep away ...  Kiss



[..........I find it highly amusing continuing to watch this thread.  I found that statement to bother me the most.  If everything is top secret, why on earth would you expect anyone to hand over any "money" into your "coin"

Another bunch of amateurs, I won't be rebuying any UTC.

Have fun believing a pile of bullshit bagholders, yeah, sure, you'll wave at me from the moon.  Grow up
member
Activity: 82
Merit: 10

Sorry but this is inside information. About payments or privilege, that's only concerning to Bumface and the management team. Most important thing is : We are the new owners !  

So you can actually *own* a coin?




I find it highly amusing continuing to watch this thread.  I found that statement to bother me the most.  If everything is top secret, why on earth would you expect anyone to hand over any "money" into your "coin"

Another bunch of amateurs, I won't be rebuying any UTC.

Have fun believing a pile of bullshit bagholders, yeah, sure, you'll wave at me from the moon.  Grow up
sr. member
Activity: 251
Merit: 250
You can split your hashrate 50/50 and what you get mining directly UTC will be bought by coins mined at multipool so you gain twice,...

I did, but more like 80/20.

btw I have been waiting for stake for 12 hours now, still none, any estimate on how often ?
should I wait for 1.4.1
POS will not begin until block 499000. We at 410,000
The update V1.0.4.0 addresses the following content:
> POS 5,2% p/year – 0,1% p/week (starting as from block 450000)
> Some small new futures and new pop up warning screens
> Using the new UTC 2.0 logo
So it will start from block 450 000. Or am I missing some news?
Edit:
Sorry I found bumface's post later Wink It will start from 449 000.
member
Activity: 93
Merit: 10
You can split your hashrate 50/50 and what you get mining directly UTC will be bought by coins mined at multipool so you gain twice,...

I did, but more like 80/20.

btw I have been waiting for stake for 12 hours now, still none, any estimate on how often ?
should I wait for 1.4.1
POS will not begin until block 499000. We at 410,000

If I did the math right, that puts us right at a month away from the new POS.
full member
Activity: 534
Merit: 100

Sorry but this is inside information. About payments or privilege, that's only concerning to Bumface and the management team. Most important thing is : We are the new owners !  

So you can actually *own* a coin?


sr. member
Activity: 416
Merit: 250
You can split your hashrate 50/50 and what you get mining directly UTC will be bought by coins mined at multipool so you gain twice,...

I did, but more like 80/20.

btw I have been waiting for stake for 12 hours now, still none, any estimate on how often ?
should I wait for 1.4.1
hero member
Activity: 668
Merit: 500
Can you guys please update the GitHub sources when 1.4.0.1 comes out?
Thanks
sr. member
Activity: 251
Merit: 250
I've been mining on cryptotrain for a while now and every now and then I switch to direct UTC pool mining, just to compare numbers which have always been pretty close (need to mine on cryptotrain for 3+ days to get full results).

But now since I updated to AMD 14.4 drivers (which do increase speed and lower temps for X11 at least) I get nothing but hardware errors from my old configs. I had used the config generator to set me up and everything was working correctly. Now I get tons of HW errors. Any experiencing the same or have working 280x settings they can share once on 14.4?

Thanks!
You cannot mine UTC with 14.4 drivers. You need to uninstall 14.4 and install 13.12.
hero member
Activity: 809
Merit: 501
bumface, or someone else who understands.
Please write about the points (1,2,3 ...) that needs to be done that would enable extraction POS coins.
The fact that my automatic translator translates badly (what - I did not use) and I do not quite understand how to make the POS of texts written above.
Advance all grateful.
enable stake minting =>enable POS
This I understand, but there is still written that wallet must be open 24/7 and it must be encrypted. Why encrypt?
Is it enough to simply enable stake minting and keep it always open?
Remember; for Stake Minting at V1.0.4.0 you will have to keep your wallet open for 24/7 and Enable Stake Minting with your password !


you should keep stake  minting status 24 hours and 7 days per week to get your POS REWARD,or you will not get all the rewards . for example ,you keep stake  minting for 23 hours and you will get 1/2 rewards maybe

Completely false
newbie
Activity: 36
Merit: 0
I've been mining on cryptotrain for a while now and every now and then I switch to direct UTC pool mining, just to compare numbers which have always been pretty close (need to mine on cryptotrain for 3+ days to get full results).

But now since I updated to AMD 14.4 drivers (which do increase speed and lower temps for X11 at least) I get nothing but hardware errors from my old configs. I had used the config generator to set me up and everything was working correctly. Now I get tons of HW errors. Any experiencing the same or have working 280x settings they can share once on 14.4?

Thanks!
sr. member
Activity: 251
Merit: 250
Its not as profitable as mining directly UTC, and it will take me a lot effort and time to reset everything to X11
(btw I have a few MH on the train too)
Keep in mind that you will get at least about 20% lower power bill, unless you have free electricity Smiley and in two weeks time you'll have to set it up again due to n-factor change.

You can split your hashrate 50/50 and what you get mining directly UTC will be bought by coins mined at multipool so you gain twice, the price goes up and you can sell UTC higher.

But of course if you have a large farm it could take some time to make it running.
full member
Activity: 238
Merit: 100
http://ultracoin.net/ - Ultracoin Website http://c
bumface, or someone else who understands.
Please write about the points (1,2,3 ...) that needs to be done that would enable extraction POS coins.
The fact that my automatic translator translates badly (what - I did not use) and I do not quite understand how to make the POS of texts written above.
Advance all grateful.
enable stake minting =>enable POS
This I understand, but there is still written that wallet must be open 24/7 and it must be encrypted. Why encrypt?
Is it enough to simply enable stake minting and keep it always open?
Remember; for Stake Minting at V1.0.4.0 you will have to keep your wallet open for 24/7 and Enable Stake Minting with your password !


you should keep stake  minting status 24 hours per day and 7 days per week to get your POS REWARD,or you will not get all the rewards . for example ,you keep stake  minting for 23 hours and you will get 1/2 rewards maybe
hero member
Activity: 837
Merit: 505
bumface, or someone else who understands.
Please write about the points (1,2,3 ...) that needs to be done that would enable extraction POS coins.
The fact that my automatic translator translates badly (what - I did not use) and I do not quite understand how to make the POS of texts written above.
Advance all grateful.
enable stake minting =>enable POS
This I understand, but there is still written that wallet must be open 24/7 and it must be encrypted. Why encrypt?
Is it enough to simply enable stake minting and keep it always open?
Remember; for Stake Minting at V1.0.4.0 you will have to keep your wallet open for 24/7 and Enable Stake Minting with your password !
member
Activity: 91
Merit: 10
Its not as profitable as mining directly UTC, and it will take me a lot effort and time to reset everything to X11
(btw I have a few MH on the train too)

theres scrypt and sha256 too  Grin

we could really use a guy like you
sr. member
Activity: 416
Merit: 250
Its not as profitable as mining directly UTC, and it will take me a lot effort and time to reset everything to X11
(btw I have a few MH on the train too)
sr. member
Activity: 251
Merit: 250
Hence your new dev. team pool is dead, try lowering fees.
If you  make it with 0% fee, at least for a certain period of time, I will join - I am +22% of the current networks hash power Cheesy Cheesy Cheesy

Well its not 0% tax but as I promised Smiley

(I might even bring a few friends around)
Have you tried mining x11 at cryptotrain.net (UTC multipool)? Since you have such hashpower it would be a huge increase Smiley
hero member
Activity: 728
Merit: 501
Hence your new dev. team pool is dead, try lowering fees.
If you  make it with 0% fee, at least for a certain period of time, I will join - I am +22% of the current networks hash power Cheesy Cheesy Cheesy

Well its not 0% but as I promised Smiley

(I might even bring a few friends around)

hi friend,

Pools need fees to survive,they cost 100`s of dollars per month to operate  Wink
sr. member
Activity: 416
Merit: 250
Hence your new dev. team pool is dead, try lowering fees.
If you  make it with 0% fee, at least for a certain period of time, I will join - I am +22% of the current networks hash power Cheesy Cheesy Cheesy

Well its not 0% tax but as I promised Smiley

(I might even bring a few friends around)
full member
Activity: 228
Merit: 100
Hi guys

There will be another update soon,if you have not updated yet please wait a little bit untill version 1.0.4.1 is released.

If you alrerady updated to 1.0.4 thats not a problem , but please update again when 1.0.4.1 is released.

The new update will have a checkpoint key update and some final POS tweaking (the pos change will still take effect in block 449000)

We apologise for the inconveniance


Remove the announcement from Facebook and such if people should wait with the update.
full member
Activity: 238
Merit: 100
http://ultracoin.net/ - Ultracoin Website http://c
Hi guys

There will be another update soon,if you have not updated yet please wait a little bit untill version 1.0.4.1 is released.

If you alrerady updated to 1.0.4 thats not a problem , but please update again when 1.0.4.1 is released.

The new update will have a checkpoint key update and some final POS tweaking (the pos change will still take effect in block 449000)

We apologise for the inconveniance

accept your apologise
Pages:
Jump to: