Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 686. (Read 946654 times)
February 10, 2014, 01:06:23 AM
It is 0.0011 BTC NOW !!!
February 10, 2014, 12:48:50 AM
It is at https://crypto-trade.com 
Is that a mistype?
CoinMarket.io has it as 0.00106
0.000108 BTC NOW !!!
Is that a mistype?
CoinMarket.io has it as 0.00106
February 10, 2014, 12:47:45 AM
Diff 33. FIRST TIME EVER !!!
February 10, 2014, 12:23:28 AM
0.000108 BTC NOW !!!
Is that a mistype?
CoinMarket.io has it as 0.00106
February 10, 2014, 12:15:46 AM
0.000108 BTC NOW !!!
February 10, 2014, 12:15:06 AM
It can go anywhere after the pool entries. In fact you don't "have" to add it, but many do. You could have it in the middle though, doesn't matter:
This is my config for 7950's
failover is in the middle
thanks again ... but if i dont use from this parameter , auto switch is disabled ? This is my config for 7950's
failover is in the middle
If you list multiple pools, it will switch to them either way. For a better description; Might as well hear it "from the horses mouth" so to speak. The Dev for CGminer
The normal failover mechanism in cgminer will allow some work to go to the backup pools if there is a delay in getting work from the primary pool you have set. This can be as much as 10% if the pool has latency issues. It then only fails to the backup pool if the primary pool stops giving work for 1 minute. failover-only does not change the failover mechanism, but it does not allow work to go to the backup pools unless the primary pool has failed completely for at least a minute. It then will switch to the backup pool. If cgminer considers a pool dead or down, it tries to contact that pool 1 minutely.
hope this helps
thanks alot my brother ... very helpful .
February 10, 2014, 12:07:21 AM
It can go anywhere after the pool entries. In fact you don't "have" to add it, but many do. You could have it in the middle though, doesn't matter:
This is my config for 7950's
failover is in the middle
thanks again ... but if i dont use from this parameter , auto switch is disabled ? This is my config for 7950's
failover is in the middle
If you list multiple pools, it will switch to them either way. For a better description; Might as well hear it "from the horses mouth" so to speak. The Dev for CGminer
The normal failover mechanism in cgminer will allow some work to go to the backup pools if there is a delay in getting work from the primary pool you have set. This can be as much as 10% if the pool has latency issues. It then only fails to the backup pool if the primary pool stops giving work for 1 minute. failover-only does not change the failover mechanism, but it does not allow work to go to the backup pools unless the primary pool has failed completely for at least a minute. It then will switch to the backup pool. If cgminer considers a pool dead or down, it tries to contact that pool 1 minutely.
hope this helps
February 10, 2014, 12:04:46 AM
Could the crons be stuck?
February 10, 2014, 12:01:26 AM
anyone know whats up with utc.pool.pm? The block stats have been stuck showing the same data for like 1.5 hours.
Not sure, mining numbers are still rolling though.
February 09, 2014, 11:57:33 PM
UTC is getting lot of traction from community.
NET HASH @ 4.X GH/s. Price up too.
Congratulation to all and we are moving UP UP UP
NET HASH @ 4.X GH/s. Price up too.
Congratulation to all and we are moving UP UP UP
February 09, 2014, 11:49:37 PM
It can go anywhere after the pool entries. In fact you don't "have" to add it, but many do. You could have it in the middle though, doesn't matter:
This is my config for 7950's
failover is in the middle
thanks again ... but if i dont use from this parameter , auto switch is disabled ?
February 09, 2014, 11:29:18 PM
anyone know whats up with utc.pool.pm? The block stats have been stuck showing the same data for like 1.5 hours.
February 09, 2014, 11:15:44 PM
Is there any benefit to mining on a more populated server? Do you get more coins mining on the higher hash sites?
The larger the pools hashrate that faster coins are found, but the smaller the payouts.
Conversely, a pool with smaller hashrates, are going to find blocks a little less quicker, but your payouts will be larger. It is up to you which pool you like. Its a matter of preference
Thanks, it just seemed that when Leetpool went down and i switched to nitropool i found more coins in shorter period of time. I should have timed it but i didn't think it would make difference.
February 09, 2014, 11:07:59 PM
Is there any benefit to mining on a more populated server? Do you get more coins mining on the higher hash sites?
The larger the pools hashrate that faster coins are found, but the smaller the payouts.
Conversely, a pool with smaller hashrates, are going to find blocks a little less quicker, but your payouts will be larger. It is up to you which pool you like. Its a matter of preference
February 09, 2014, 11:04:41 PM
Is there any benefit to mining on a more populated server? Do you get more coins mining on the higher hash sites?
It honestly depends on how much hashrate you have. IF you dont have much hashrate, the benefit is that you will hit blocks more often. But you will not get more coins. You will get smaller portions. IF you have a huge hashrate, joining a smaller pool might be beneficial because you will get alot more coins per block. Try ultra.minepools.us
February 09, 2014, 11:02:24 PM
If someone wants to send 1 UTC so I can test deposits and withdrawals, I'll put this up on Poloniex. Address: URd73srMBXFYdLP98hJP4ev9mLDHVwGJBn
Ooh. If I wasn't at work, I would have sent it to you.
So it'll be up on your exchange soon?
February 09, 2014, 10:59:06 PM
Is there any benefit to mining on a more populated server? Do you get more coins mining on the higher hash sites?
February 09, 2014, 10:53:40 PM
If someone wants to send 1 UTC so I can test deposits and withdrawals, I'll put this up on Poloniex. Address: URd73srMBXFYdLP98hJP4ev9mLDHVwGJBn
February 09, 2014, 10:40:33 PM
Just noticed .11 diference between by and sell price of UTC, that seems like quite a bit compared to the other cryptos. Good though, maybe miners will hold thier coins and prices will climed higher.
February 09, 2014, 10:29:57 PM
Minepools is back up and has been working perfectly. we will be implementing and switching to a new server soon with better protection. thank you for all that has stuck with us and we invite anyone to join us. Looking forward to getting back to where we were. We will continue to offer the best service we possible can. Fees are set to .5% indefinitely. THank you
Join Now!!!!
ultra.minepools.us , #minepools
Join Now!!!!
ultra.minepools.us , #minepools
Jump to: