Highly profitable right now!!
uh? not really, the gpu miner come too late, diff is 287
Topic: [ANN] [BBL] BitBlock-World's first X15 coin|Bittrex|Poloniex|Mandatory Update - page 24. (Read 82727 times)
June 27, 2014, 02:13:47 PM
uh? not really, the gpu miner come too late, diff is 287
June 27, 2014, 02:10:59 PM
here a post-preliminary x15 (far from the quality of Christian releases) ccminer for nvidia, windows binaries only.
The source will be released later.
It runs this way ccminer -a x13 (I haven't fixed that yet)
https://mega.co.nz/#!EEck0D5B!bn_iXChN852qnUnKtBzKe7RaAmPqRivWtbl0Jop9ehg
The source will be released later.
It runs this way ccminer -a x13 (I haven't fixed that yet)
https://mega.co.nz/#!EEck0D5B!bn_iXChN852qnUnKtBzKe7RaAmPqRivWtbl0Jop9ehg
Dead link
June 27, 2014, 01:56:30 PM
Don't have any HD58XX for testing but i could use some info ... does your HD58XX works with the marucoin-modold or x13modold ?
With x13modold
Done ... let's give it a try
https://mega.co.nz/#!sZcGySSQ!GoeiVnJ1Kc2UTt40AIT_gCenDX8xw1L6-Vi2ZHs1gZA
aznboy84, can you pull request with ystarnaud over at https://github.com/sgminer-dev/sgminer/tree/v5_0-new-algo ?
Can't ... just signed up github today ... but i guess it's private
It moved within the last 6 hours, can you submit a pull request to https://github.com/sgminer-dev/sgminer/tree/v5_0 please?
June 27, 2014, 01:51:55 PM
Is the GPU miner working on bbl.altmine.net?
Doesn't seem like the current version support the --no-extranonce-subscribe, which is required for P2Pool. I compiled a version with this set, and it works fine on all p2pool nodes i tried...
Update: Place the "no-extranonce" : true in the pool settings instead of --no-extranonce-subscribe on the command line.
June 27, 2014, 01:50:27 PM
here a post-preliminary x15 (far from the quality of Christian releases) ccminer for nvidia, windows binaries only.
The source will be released later.
It runs this way ccminer -a x13 (I haven't fixed that yet)
https://mega.co.nz/#!EEck0D5B!bn_iXChN852qnUnKtBzKe7RaAmPqRivWtbl0Jop9ehg
Are you sure it's x15 not x13? I have same hashrate as X13. Not tested on pool yet. The source will be released later.
It runs this way ccminer -a x13 (I haven't fixed that yet)
https://mega.co.nz/#!EEck0D5B!bn_iXChN852qnUnKtBzKe7RaAmPqRivWtbl0Jop9ehg
June 27, 2014, 01:43:59 PM
Highly profitable right now!!
June 27, 2014, 01:32:30 PM
Is the GPU miner working on bbl.altmine.net?
June 27, 2014, 01:30:42 PM
Faucet for BitBlock
June 27, 2014, 01:14:16 PM
here a post-preliminary x15 (far from the quality of Christian releases) ccminer for nvidia, windows binaries only.
The source will be released later.
It runs this way ccminer -a x13 (I haven't fixed that yet)
https://mega.co.nz/#!EEck0D5B!bn_iXChN852qnUnKtBzKe7RaAmPqRivWtbl0Jop9ehg
The source will be released later.
It runs this way ccminer -a x13 (I haven't fixed that yet)
https://mega.co.nz/#!EEck0D5B!bn_iXChN852qnUnKtBzKe7RaAmPqRivWtbl0Jop9ehg
June 27, 2014, 12:49:19 PM
compiling in Linux:
# autoreconf -i
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
# autoreconf -i
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
I have this message - PIMP 1.5.51 driver 14.6.
Solution?
Code:
sh autogen.sh
CFLAGS="-O2 -Wall" ./configure
make
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
June 27, 2014, 12:48:37 PM
contact these guys and get yourself on there as the 2nd coin...if its at all possible!
https://www.37coins.com
well done on the wallet!
what is in the update?
https://www.37coins.com
well done on the wallet!
what is in the update?
June 27, 2014, 12:48:05 PM
compiling in Linux:
# autoreconf -i
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
# autoreconf -i
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
I have this message - PIMP 1.5.51 driver 14.6.
Solution?
Code:
sh autogen.sh
CFLAGS="-O2 -Wall" ./configure
make
June 27, 2014, 12:44:05 PM
compiling in Linux:
# autoreconf -i
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
# autoreconf -i
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
I have this message - PIMP 1.5.51 driver 14.6.
Solution?
June 27, 2014, 12:40:08 PM
Finally new wallet almost done. Will be updated on github sometime tonight, After that we will do the recompile for the windows gui and post a new mega link for it on ANN 
, Also, anyone want android wallet? if so we will work on that if enough miners would like to see that happen.
, Also, anyone want android wallet? if so we will work on that if enough miners would like to see that happen. June 27, 2014, 12:39:44 PM
lol, It look like there is a gpu miner per posts
Have you got your awesome miner to work with this algo?
June 27, 2014, 12:35:19 PM
Suprnova is almost dead.
Suchpool servers are down too.
Sgminer is not 5.0 version.
Suchpool servers are down too.
Sgminer is not 5.0 version.
suchpool is not down at all.
Suchpool servers WERE down. For a long time.
June 27, 2014, 12:28:40 PM
Suprnova is almost dead.
Suchpool servers are down too.
Sgminer is not 5.0 version.
Suchpool servers are down too.
Sgminer is not 5.0 version.
suchpool is not down at all.
as so is suprnova... running better than ever
)SuprNova, Hasharder and SuchPool are all running #1 at the moment.
The only misconfigured pool at the moment seems dedicated, hashrates not reporting correctly.
June 27, 2014, 12:28:32 PM
compiling in Linux (aznboy84/X15GPU):
#autoreconf -i
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
#autoreconf -i
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
Same problem when trying to compile on PIMP 1.5.5. Anyone got a fix?
June 27, 2014, 12:23:55 PM
network hash 10G 
Why did you fools drive it so high ? Its not even paying electricity anymore....
Mining was much nicer this morning with network @ 1 G
Why did you fools drive it so high ? Its not even paying electricity anymore....Mining was much nicer this morning with network @ 1 G
June 27, 2014, 12:12:35 PM
same goes here, 2.5 max, what is your config? thanks
For x11, x13 and x15, worksize does important to get better hashrateI was experienced that 280x gives best hashrate on worksize 64, but 7950 and 270x good on worksize 128
280x - 2.7MH/s
Quote
-I 19 -g 2 -w 64 --gpu-memclock 1250 --gpu-engine 1100 --gpu-fan 63
270x - 1.7MH/s / 7950 - 2.2MH/s
Quote
-I 19 -g 2 -w 128 --gpu-memclock 1250 --gpu-engine 1100 --gpu-fan 63 --gpu-powertune 20
Indeed, I have 2.85 now
Thank you
Jump to: