how come the reward is now at 52bbl (while it was at 27bbl when the difficulty was much lower) ?
(is there a new case every 100 blocks ) ?
(is there a new case every 100 blocks ) ?
After block 5465 the subsidy block reward code changed.
Topic: [ANN] [BBL] BitBlock-World's first X15 coin|Bittrex|Poloniex|Mandatory Update - page 27. (Read 82727 times)
June 27, 2014, 08:53:14 AM
After block 5465 the subsidy block reward code changed.
June 27, 2014, 08:47:48 AM
Ocminer 10x bro, for removing the fee 
Anyone have a config for hd7850 ?
I'm getting this
GPU 0: | 1.186M/1.185Mh/s | R: 0.0% HW:0 WU:0.018/m I:18
GPU 1: | 1.182M/1.184Mh/s | R: 0.0% HW:0 WU:0.019/m I:18
with this:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer --algorithm bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u x -p x -I 18 -w 256 -g 2 --no-adl --no-submit-stale
Any suggestions for better performance ?
Anyone have a config for hd7850 ?
I'm getting this
GPU 0: | 1.186M/1.185Mh/s | R: 0.0% HW:0 WU:0.018/m I:18
GPU 1: | 1.182M/1.184Mh/s | R: 0.0% HW:0 WU:0.019/m I:18
with this:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer --algorithm bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u x -p x -I 18 -w 256 -g 2 --no-adl --no-submit-stale
Any suggestions for better performance ?
farm 4-х 7850 does not work this miner computer freezes and all(
June 27, 2014, 08:36:57 AM
how come the reward is now at 52bbl (while it was at 27bbl when the difficulty was much lower) ?
(is there a new case every 100 blocks ) ?
(is there a new case every 100 blocks ) ?
June 27, 2014, 08:35:55 AM
Ocminer 10x bro, for removing the fee
Anyone have a config for hd7850 ?
I'm getting this
GPU 0: | 1.186M/1.185Mh/s | R: 0.0% HW:0 WU:0.018/m I:18
GPU 1: | 1.182M/1.184Mh/s | R: 0.0% HW:0 WU:0.019/m I:18
with this:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer --algorithm bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u x -p x -I 18 -w 256 -g 2 --no-adl --no-submit-stale
Any suggestions for better performance ?
Anyone have a config for hd7850 ?
I'm getting this
GPU 0: | 1.186M/1.185Mh/s | R: 0.0% HW:0 WU:0.018/m I:18
GPU 1: | 1.182M/1.184Mh/s | R: 0.0% HW:0 WU:0.019/m I:18
with this:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer --algorithm bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u x -p x -I 18 -w 256 -g 2 --no-adl --no-submit-stale
Any suggestions for better performance ?
June 27, 2014, 08:31:48 AM
Hey guys...
I'm working on a questionnaire...
does this seem right?
I'm working on a questionnaire...
does this seem right?
Code:
Scam Coin Questionnaire
-------------------------
1) Coin Algo SHA/Scrypt?
a) Yes -
ASIC Rape. No Innovation. Go to (10)
b) No -
Go to (2)
2) Coin Algo X11/X13?
a) Yes -
FPGA Rape. Rental Rape. No Innovation. Go to (10)
b) No
3) Coin Algo Custom?
a) Yes -
Instamine Scam. Secret GPU Mine Scam. Too Hard to Mine. Go to (10)
10) Is there premine?
a) Yes -
Scam Coin. Devs will Dump on Exchanges. *END*
b) No -
Go to (11)
11) Is there donation / IPO / instamine / blocks I missed mining on?
a) Yes -
Scam Coin. Clearly secretly GPU/instamined by Devs to dump on exchanges. *END*
b) No -
12) Not interesting. No hashrate. No miners. *END*
June 27, 2014, 08:29:07 AM
Don't have any HD58XX for testing but i could use some info ... does your HD58XX works with the marucoin-modold or x13modold ?
With x13modold
Done ... let's give it a try
https://mega.co.nz/#!sZcGySSQ!GoeiVnJ1Kc2UTt40AIT_gCenDX8xw1L6-Vi2ZHs1gZA
aznboy84, can you pull request with ystarnaud over at https://github.com/sgminer-dev/sgminer/tree/v5_0-new-algo ?
Can't ... just signed up github today ... but i guess it's private
June 27, 2014, 08:16:51 AM
WTF is going on with Suprnova??
I don't know, the site seems slow but up - but I'm pretty sure ocminer is aware and working on a solution.
If it's similar to Hashharder's issues - its possibly because the massive jump in hashrate owing to GPU miners is taxing the server due to the original CPU mining diff settings. Although I can't be sure.
If anyone can fix the issues though, he can, so be patient and I'm sure he will come through.
Hi !
I'm aware, and working on a solution.
Currently the problem is, people are renting Scrypt, X11 and X13 rigs and are pointing them to the pool, resulting in massive invalid shares and a DDoS-like Attack.
I'm trying to keep the stratum up, thats why the Frontend is laggy as hell, but better stratum running and frontend slow than vice versa.
As soon as the people realize that this is X15, not X11, Scrypt or X13, everything will be fine.
EDIT: Your shares and payouts are totally safe, dont worry.
Thank you for the update. Frontend is up and fast now.
All issues on https://bbl.suprnova.cc fixed, we're at full performance again.
Thx for your patience guys, and sorry for the short interruption !
I'm dropping the fee to 0% and give out 5% bonus for every mined block from my coins to compensate for the downtime until this evening 22h CEST as I had some people complaining and I see you're right.
June 27, 2014, 08:13:05 AM
No we are not the dev's from marucoin. Also to those still talking about unfair launch/block rewards etc. there are 3 great exchanges selling for quite low still right now, even WE are buying some of our own coins because the coin will start to even out, become settled and market cap will increase.
definately , snapping them up as I type!!Plus the FUDers well there will always be them , think they missed the mining , jealous is the word I would use and , looked fair to me , cant expect perfection , EVER!!
Doing a good job anyways, Thaks for your work mate!!
There is little FUD in this thread.
The figures posted by some concerned forum members here are factual until disproved.
Interpretation of the numbers can be subjective of course. For creating a well informed opinion I do like a discussion and if I have my facts wrong I will admit and stand corrected.
But,
The term FUDder or crybaby doesn't help building a constructive argument imo, those words can rather be used to manipulate some easily influenced spectators.
No emotion involved on my part, only maybe slight astonishment if this coin takes off short term : )
June 27, 2014, 08:10:47 AM
Looking at buying. How many coins so far? How much inflation?
June 27, 2014, 08:04:37 AM
its works with old cards ? 5870, 5970, 6970, 6990
i have only hw errors..
i have only hw errors..
no, i have the same problem
June 27, 2014, 07:59:54 AM
I only mine 7 coins yesterday in suprnova with a I4 is it normal? 
June 27, 2014, 07:59:48 AM
This sgminer is not compatible with cgwatcher,any ideas?
June 27, 2014, 07:58:54 AM
its works with old cards ? 5870, 5970, 6970, 6990
i have only hw errors..
i have only hw errors..
June 27, 2014, 07:57:39 AM
WTF is going on with Suprnova??
I don't know, the site seems slow but up - but I'm pretty sure ocminer is aware and working on a solution.
If it's similar to Hashharder's issues - its possibly because the massive jump in hashrate owing to GPU miners is taxing the server due to the original CPU mining diff settings. Although I can't be sure.
If anyone can fix the issues though, he can, so be patient and I'm sure he will come through.
Hi !
I'm aware, and working on a solution.
Currently the problem is, people are renting Scrypt, X11 and X13 rigs and are pointing them to the pool, resulting in massive invalid shares and a DDoS-like Attack.
I'm trying to keep the stratum up, thats why the Frontend is laggy as hell, but better stratum running and frontend slow than vice versa.
As soon as the people realize that this is X15, not X11, Scrypt or X13, everything will be fine.
EDIT: Your shares and payouts are totally safe, dont worry.
Thank you for the update. Frontend is up and fast now.
All issues on https://bbl.suprnova.cc fixed, we're at full performance again.
Thx for your patience guys, and sorry for the short interruption !
June 27, 2014, 07:56:17 AM
@aznboy84 is this 32 bit version should it make difference if I try to build 64 bit one.
Got a x64 version too but there's no point, no hashrate difference between x32 and x64
here goes the x64 build
https://mega.co.nz/#!EJVWEK6D!atU0PRIfcKpP9WowkgsJT0GDXctnQPo_CarfCaSWkJ8
aznboy84, can you pull request with ystarnaud over at https://github.com/sgminer-dev/sgminer/tree/v5_0-new-algo ?
June 27, 2014, 07:55:04 AM
Please fix HD58XX
Thanks.
Thanks.
Don't have any HD58XX for testing but i could use some info ... does your HD58XX works with the marucoin-modold or x13modold ?
With x13modold
June 27, 2014, 07:53:21 AM
Please fix HD58XX
Thanks.
Thanks.
Don't have any HD58XX for testing but i could use some info ... does your HD58XX works with the marucoin-modold or x13modold ?
June 27, 2014, 07:50:45 AM
Please fix HD58XX
Thanks.
Thanks.
June 27, 2014, 07:44:30 AM
https://mega.co.nz/#!gA9HECaa!J-rBsnlNjasOYXmUgcc0_X-zPcYatb9NKUG-FPgLnYE
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe --algorithm bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u xxxx -p x --intensity 19 -g 2 -w 64
280x 2.5mh/s
14.6 driver
280x 2.2mh/s
13.2 driver
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe --algorithm bitblock -o stratum+tcp://bbl.suprnova.cc:3663 -u xxxx -p x --intensity 19 -g 2 -w 64
280x 2.5mh/s
14.6 driver
280x 2.2mh/s
13.2 driver
June 27, 2014, 07:43:10 AM
@aznboy84 is this 32 bit version should it make difference if I try to build 64 bit one.
Got a x64 version too but there's no point, no hashrate difference between x32 and x64
here goes the x64 build
https://mega.co.nz/#!EJVWEK6D!atU0PRIfcKpP9WowkgsJT0GDXctnQPo_CarfCaSWkJ8
Jump to: